The Edelbrock C-66-O Dual-Quad #54201 is a dual plane intake manifold which combines dual four-barrel excitement with a well-mannered street manifold. Designed for 396-502 c.i.d. Chevys V8's with large oval-port cylinder heads (1975 and earlier) or Edelbrock Performer/Performer RPM heads. Tests confirmed smooth, consistent part-throttle operation with a 25 hp gain over Torker II and a torque gain of 30 ft-lbs. over Performer. Includes metering rods to calibrate Edelbrock #1405 carbs. Carb center to carb center is 6-7/16". Use with Performer-Plus cam/kit #2162 for low-end torque or Torker-Plus cam/kit #5062 for top-end power. Will not fit tall-deck truck blocks.
Specifications:
Description_ABR |
Intake Mnfld |
Description_ASM |
Chevrolet:Big-Block Mark IV:396 (6.6L)/402 (6.6L)/427 (7.0L)/454 (7.4L)/502 (8.2L) |
Description_DEF |
Engine Intake Manifold |
Description_EXT |
The Edelbrock C-66-O Dual-Quad #54201 is a dual plane intake manifold designed for 396-502 c.i.d. Chevys V8's with large oval-port cylinder heads (1975 and earlier) or Edelbrock Performer/Performer RPM heads. |
Description_INV |
POLISHED (NR) C-66-O MANIFOLD |
Description_LAB |
Edelbrock part #54201 Big-Block Chevy C-66-O polished intake manifold |
Description_TRA |
H.E.I. will fit |
Description_TRA |
Recommended intake gasket: Edelbrock #7203 |
Description_TRA |
Manifold height: A-3.95", B-4.65" |
Description_TRA |
Carb pad height: 4.30" |
Description_TRA |
Port exit dimensions: 1.64" x 1.94" |
Description_TRA |
Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS. |
Description_TRA |
Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum. |
Description_MKT |
The Edelbrock C-66-O Dual-Quad #54201 is a dual plane intake manifold which combines dual four-barrel excitement with a well-mannered street manifold. Designed for 396-502 c.i.d. Chevys V8's with large oval-port cylinder heads (1975 and earlier) or Edelbrock Performer/Performer RPM heads. Tests confirmed smooth, consistent part-throttle operation with a 25 hp gain over Torker II and a torque gain of 30 ft-lbs. over Performer. Includes metering rods to calibrate Edelbrock #1405 carbs. Carb center to carb center is 6-7/16". Use with Performer-Plus cam/kit #2162 for low-end torque or Torker-Plus cam/kit #5062 for top-end power. Will not fit tall-deck truck blocks. |
RGL |
WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov. |
Length |
8.0000 |
Width |
15.0000 |
Height |
24.0000 |
Weight |
19.0000 |