| Description_ASC |
Professional Installation Recommended |
| Description_ASM |
Universal |
| Description_DEF |
Auxiliary Light |
| Description_EXT |
Adapt XE Extreme Enduro Ready To Ride Moto Kit, Includes LED Light With 3 Lighting Zones And GPS Module, Yellow Light Cover, White Number Plate, Wire Harness, 3 Position Kill Switch, And Mounting Kit |
| Description_DES |
Adapt XE Extreme Enduro Complete Ready To Ride LED Moto Kit, White |
| Description_MKT |
The RIGID Adapt XE has a signature look that is unlike any other off-road motorcycle LED light on the market. Feature packed with the most advanced patented technology, this dirt bike light features a high-strength aluminum heat sink and an impact resistant polycarbonate lens.On the inside the Adapt XE contains cutting-edge technology. The Adapt XE takes off-road lighting performance to a whole new level with two layers of adaptive response to your bike and driving conditions.The first layer of adaptive response is RIGIDs Active Power Management (APM) system which continuously monitors input voltage to determine the status of the vehicles electrical system.If the voltage is stable, the Adapt XE will continue to utilize all available power to give you the most output possible. If the available voltage to the light begins to drop due to insufficient power, RIGIDs APM system will gradually reduce the lights power consumption until the bikes voltage stabilizes.The second layer of adaptive response featured in the Adapt XE is RIGIDs proven Active View Technology. This technology uses an internal GPS module to determine the bikes speed, allowing the Adapt to properly distribute all available power among three unique optic zones.Utilizing the three optic zones allows the Active View Technology to create the ideal beam pattern to suit the riders needs. As the vehicles speed changes, power is dynamically routed through various optic zones utilizing scene optics for low speed, driving optics for moderate speed and spot optics for high-speed driving.Power is transferred gradually between optic zones allowing for a seamless transition between beam patterns and providing much brighter and more natural looking light and reducing eye fatigue.As an extra feature, the Adapt XE features a Magnetic Reed power clip for additional customization. Leaving the switch in place limits the light to consuming a maximum of 2.7 amps. When the switch is removed the light will consume up to 5.6 amps when all zones are activated.The Adapt XE fits most bikes, and the wiring harness and custom handlebar switch is included. Whether running a factory stator with voltage regulator or have additional power available, the Adapt XE will give you the light you need, when you need it, where you need it.Own The Night with RIGIDs Adapt XE motorcycle light. Whats In the PackageWhiteMounting BracketMagnetic Reed Power ClipAmber Light CoverBlack Number PlateWire Harness And 3-Position SwitchDetails:Universal Fit - Fits Most Bikes3 Optic Zones Scene, Driving, SpotSlow, Moderate and High-Speed Beam PatternsSeamless Beam TransitionActive Power Management System - Power Capacity SensingActive View Technology - Internal GPS ModuleUse In Adapt Mode Or All OnWorks With Factory Stator or BatteryImpact Resistant Polycarbonate LensDurable UV Polyester Powder CoatPressure Equalizing VentOperating Temp -22F to +158F/-30C to +70C9-32 VDCAlloy Housing and HeatsinkLimited Lifetime WarrantyOff Road Use Only Professional Installation Recommended |
| Description_INV |
ADAPT XE MOTO UNIV RTR KIT WHT |
| Description_FAB |
3 Optic Zones - Scene, Driving, Spot |
| Description_FAB |
Slow, Moderate & High-Speed Beam Patterns |
| Description_FAB |
Seamless Beam Transition |
| Description_FAB |
Active Power Management System - Power Capacity Sensing |
| Description_FAB |
Active View Technology - Internal GPS Module |
| Description_FAB |
Use In Adapt Mode Or All On |
| Description_FAB |
Works With Factory Stator or Battery |
| Description_FAB |
Use In Adapt Mode Or All On |
| Description_FAB |
Works With Factory Stator or Battery |
| Description_FAB |
Fits Most Off Road Motorcycles |
| Description_FAB |
Impact Resistant Polycarbonate Lens |
| Description_FAB |
Durable UV Polyester Powder Coat |
| Description_FAB |
Pressure Equalizing Vent |
| Description_FAB |
Operating Temp -22F to +158F/-30C to +70C |
| Description_FAB |
9-32 VDC |
| Description_FAB |
Alloy Housing and Heatsink |
| Description_FAB |
Limited Lifetime Warranty |
| Description_FAB |
Off Road Use Only |
| Description_SHO |
RIGID Adapt XE Extreme Enduro Complete Ready To Ride LED Moto Kit White |
| Product Fits What |
Universal Fit - Fits Most Bikes |
| What's In The Package |
Mounting Bracket, Magnetic Reed Power Clip, Amber Light Cover, White Number Plate, Wire Harness And 3-Position Switch |
| Watts |
25 / 79 |
| color |
White |
| Prop 65 Yes/No |
No |
| Add-On |
300418, 300419, 300420, 300421, 300422, 300427, 300428, 300429 |
| C = Beam Distance with .25 LUX |
72 / 678.2 |
| Field Vertical (Measured in Degrees) |
15.9 / 78.5 |
| Peak Beam Intensity (cd) |
1,296 / 114,975 |
| Number of LEDs |
14 |
| Number of LED's |
14 |
| series |
Adapt |
| Title |
RIGID Adapt XE Extreme Enduro Ready To Ride Moto Kit, Includes LED Light With 3 Lighting Zones And GPS Module, Amber Light Cover, White Number Plate, Wire Harness, 3 Position Kill Switch, And Mounting Kit |
| Field Horizontal (Measured in Degrees) |
15 / 81.3 |
| Raw Lumens |
2,992 / 8,786 |
| B = Beam Distance with 1 LUX |
36 / 339.1 |
| A = LUX at 10 Meters |
12.96 / 1,149.75 |
| Product Weight |
4 |
| Amp Draw |
1.786 / 5.643 |
| ASIN |
B08ZG3B71C |
| Product Family |
Adapt |
| Length |
21.0000 |
| Width |
17.0000 |
| Height |
5.0000 |
| Weight |
6.0000 |
