| Description_ASM |
2018+ Ford Mustang GT |
| Description_DEF |
Engine Oil Cooler |
| Description_DES |
Ford Mustang Oil Cooler Kit, 2018+ |
| Description_FAB |
Direct fit for the 2018+ Ford Mustang GT |
| Description_FAB |
Innovative bar-and-plate oil cooler mounts in the upper grille, allowing more room for supercharger heat exchangers |
| Description_FAB |
Pre-made stainless steel braided oil lines with durable -AN fittings |
| Description_FAB |
Includes replacement lower radiator hose to bypass the stock fluid-based oil cooler |
| Description_FAB |
Mishimoto Lifetime Warranty |
| Description_KEY |
Mishimoto 2018+ Ford Mustang GT Oil Cooler Kit |
| Description_INV |
Mishimoto MMOC-MUS8-18T |
| Description_EXT |
Oil Cooler Kit, fits Ford Mustang GT 2018+ |
| Description_SHO |
Oil Cooler Kit |
| Description_MKT |
Add some extra cooling power to your 2018+ Mustang GT with the Mishimoto Oil Cooler Kit. In 2018, Ford evolved their staple muscle car with a fresh and even more futuristic look on the S550. As the Mustang evolved, we evolved along with it to provide optimal cooling for your modern Mustang. Our engineers started with designing a heat exchanger from the ground up, to provide the largest oil cooler we have to offer and mounted directly to the front of the vehicle for optimal airflow. From there, we also developed an application specific mounting bracket that also serves as a diversion panel to further improve the airflow through the cooler. Our kit also includes a set of direct fit stainless-steel braided lines for a secure conduit to and from the cooler completed with -10AN fittings for a simplified installation. Finally, the Mishimoto 2018+ Ford Mustang GT Oil Cooler Kit includes our trusted thermostatic oil sandwich plate to protect against the overcooling of your engine oil. Our kit is available with the option of a silver or black cooler, and is protected under the Mishimoto Lifetime Warranty for a worry-free installation. The Mishimoto engineers designed the heat exchanger for this project from scratch to create the largest oil cooler that we offer, and mounted it in the front of the vehicle where it receives the most airflow. Application-specific braided stainless steel lines transfer the oil from the cooler to the engine and feature -10AN fittings for an easy installation. This 2015 Mustang GT oil cooler kit is available with either a Sleek Silver or Stealth Black cooler and the Mishimoto Thermostatic Oil Sandwich Plate. As with all our 2015 Mustang parts, the Mishimoto Mustang GT Oil Cooler Kit includes the Mishimoto Lifetime Warranty. |
| TechSpec Overall Height (in) |
2.5 |
| OptionLabel |
Silver, Thermostatic |
| TechSpec Caution |
It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. |
| SellingPoint11 |
Mishimoto Lifetime Warranty |
| SellingPoint12 |
N/A |
| SellingPoint07 |
Removes the stock fluid-based oil cooler for less stress on the engine's cooling system |
| SellingPoint09 |
Increases oil capacity by 1qt |
| TechSpec Core Construction |
N/A |
| TechSpec Core Length (in) |
18.5 |
| TechSpec Core Thickness (in) |
N/A |
| TechSpec Fluid Capacity (qts) |
1 |
| TechSpec Note |
Requires the removal of the stock coolant based oil cooler.----Installation requires the removal of the active grill shutters. Removal without tuning can cause a check engine light.----Recommended torque specification for all straight fittings and banjo bolts: 15-25 lb-ftDo not exceed the maximum torque rating of 35 ft-lb |
| TechSpec Outlet |
N/A |
| SellingPoint15 |
N/A |
| TechSpec Core Height (in) |
N/A |
| TechSpec Overall Length (in) |
28.6 |
| SellingPoint05 |
Pre-made stainless steel braided oil lines with durable -AN fittings |
| SellingPoint06 |
Comes with replacement lower radiator hose to bypass the stock fluid-based oil cooler |
| SellingPoint08 |
Billet aluminum thermostatic oil sandwich plate |
| SellingPoint10 |
Fits with most aftermarket supercharger kits |
| SellingPoint13 |
N/A |
| SellingPoint14 |
N/A |
| TechSpec Applications |
N/A |
| TechSpec Overall Width (in) |
12.3 |
| TechSpec Rows |
12 |
| Install Difficulty |
4 |
| SellingPoint01 |
Direct fit for the 2015+ Ford Mustang GT |
| SellingPoint02 |
Reduces oil temperatures by up to xxF (xxC) |
| SellingPoint03 |
Innovative bar-and-plate oil cooler mounts in the upper grille, allowing more room for supercharger heat exchangers |
| SellingPoint04 |
Mounting bracket also serves as an air diversion panel, directing the maximum amount of ambient air through the oil cooler |
| TechSpec Chassis Codes |
S-550 |
| TechSpec Engine Codes |
5.0 Coyote III |
| TechSpec Includes |
Application Specific Mounting Bracket / Air Diversion Shield--Bar and Plate Oil Cooler--2ft 3in Stainless Steel Braided Hose w/ -10AN Fittings--4ft 8in Stainless Steel Braided Hose w/ -10AN Fittings--M22 Thermostatic Sandwich Plate--Application - Specific, M22 x 1.5 extended length center bolt--M20 x -10AN Straight Fittings--1/8-in NPT Plugs--Large O-ring--Lower Radiator Hose w/ worm gear clamps--Mounting Hardware Set--Mishimoto Lifetime Warranty |
| TechSpec Inlet |
N/A |
| TechSpec Installation Notes |
N/A |
| Length |
24.0000 |
| Width |
8.0000 |
| Height |
31.0000 |
| Weight |
11.0000 |
