| Description_DEF |
Intercooler Pipe Set |
| Description_DES |
Ford Focus ST Hot-Side Intercooler Pipe, 2013-2018 Polished |
| Description_EXT |
Hot-Side Intercooler Pipe, fits Ford Focus ST 2013-2018 |
| Description_FAB |
Direct fit for the 2013-2018 Ford Focus ST |
| Description_FAB |
26-percent greater flow than stock hot-side pipe |
| Description_FAB |
14-percent increase in volume over stock hot-side pipe |
| Description_FAB |
2.5in Mandrel-bent aluminum piping |
| Description_FAB |
Mishimoto Lifetime Warranty |
| Description_INV |
Mishimoto MMICP-FOST-13HP |
| Description_SHO |
Turbo Intercool Pipe |
| Description_MKT |
Open up the flow of the charged air in your 2013-2018 Ford Focus ST with the Mishimoto hot-side intercooler pipe. The stock hot-side pipe in your Focus ST is plagued with bends, a restrictive inner diameter and muffling equipment which slows the airflow and causes turbulence on the way to the intercooler. Mishimoto's hot-side intercooler kit not only reduces the amount of bends, but also increased the diameter to 2.5? giving it a 14-percent increase in volume over the stock piping meaning better flow and the added bonus of 8hp and 10ft/lbs of torque.While a majority of the stock piping is constructed from aluminum already, the couplers are made from degradation-prone rubber. Our kit includes more durable silicone couplers featuring 5-layers of heat-resistant fibers and wire reinforcement to ensure that the Mishimoto hot-side intercooler pipe can stand up to the heat. This kit is offered in a polished finish as well as a wrinkle black powder coat, and is covered under Mishimoto's Lifetime Warranty. |
| CARB EO Number |
D-759-6 |
| Install Difficulty |
3 |
| OptionLabel |
Polished |
| SellingPoint01 |
Direct fit for the 2013-2018 Ford Focus ST |
| SellingPoint02 |
26-percent greater flow than stock hot-side pipe |
| SellingPoint03 |
14-percent increase in volume over stock hot-side pipe |
| SellingPoint04 |
2.5-in Mandrel-bent aluminum piping |
| SellingPoint05 |
Includes Mishimoto silicone couplers and Mishimoto high-torque worm gear clamps |
| SellingPoint06 |
Available in polished or wrinkle black powder-coating |
| SellingPoint07 |
Mishimoto Lifetime Warranty |
| SellingPoint08 |
N/A |
| SellingPoint09 |
N/A |
| SellingPoint10 |
N/A |
| SellingPoint11 |
N/A |
| SellingPoint12 |
N/A |
| SellingPoint13 |
N/A |
| SellingPoint14 |
N/A |
| SellingPoint15 |
N/A |
| TechSpec Applications |
Ford Focus ST, 2013-2018 |
| TechSpec Centerline Radius |
N/A |
| TechSpec Chassis Codes |
N/A |
| TechSpec Core Height (in) |
N/A |
| TechSpec Core Length (in) |
N/A |
| TechSpec Core Thickness (in) |
N/A |
| TechSpec Core Type |
N/A |
| TechSpec Engine Codes |
N/A |
| TechSpec Includes |
(1) Aluminum Intercooler Pipe--(2) Silicone Couplers--(4) High-Torque Worm Gear Clamps--Mishimoto Lifetime Warranty |
| TechSpec Inlet (in) |
2 |
| TechSpec Installation Notes |
27 in-lbs (3NM) recommended for all T-bolt and constant-tension T-bolt clamps. These clamps have an operating range of 18-35 in-lbs (2-4NM). Do not exceed the maximum torque rating of 35 in-lbs (4NM). |
| TechSpec Maximum Recommended Boost Pressure (PSI) |
N/A |
| TechSpec Maximum Recommended Horsepower |
N/A |
| TechSpec Note |
N/A |
| TechSpec Outlet (in) |
2.5 |
| TechSpec Overall Height (in) |
N/A |
| TechSpec Overall Length (in) |
N/A |
| TechSpec Overall Width (in) |
N/A |
| TechSpec Pipe Diameter |
N/A |
| TechSpec Pipe Length |
N/A |
| TechSpec Pipe Shape |
N/A |
| TechSpec Weight (lbs) |
N/A |
| Length |
10.0000 |
| Width |
18.0000 |
| Height |
24.0000 |
| Weight |
8.0000 |
