| Description_DEF |
Intercooler Pipe Set |
| Description_DES |
Ford Focus ST Cold-Side Intercooler Pipe, 2013-2018 |
| Description_EXT |
Cold-Side Intercooler Pipe, fits Ford Focus ST 2013-2018 |
| Description_FAB |
Direct fit for the 2013-2018 Ford Focus ST |
| Description_FAB |
One-piece design for uninterrupted airflow, easy installation, and minimizing boost leaks |
| Description_FAB |
40% greater flow than stock cold-side pipe |
| Description_FAB |
10% increase in volume over stock cold-side pipe |
| Description_FAB |
Elliptical shape to accommodate for larger Mishimoto radiator |
| Description_FAB |
Rigid silicone construction prevents pipe movement under heavy load |
| Description_FAB |
Mishimoto Lifetime Warranty |
| Description_INV |
Mishimoto MMICP-FOST-13C |
| Description_MKT |
Increase the flow of charged air from the intercooler in your 2013-2018 Ford Focus ST with the Mishimoto performance cold-side intercooler pipe. The piping included from the factory is constructed from rubber, which not only degrades over time, but also tends to move around in the engine bay as you put your Focus ST through the paces.We here at Mishimoto ditched the degradation-prone rubber for 5 layers of durable silicone reinforced with steel wire to make sure it stays put in the engine bay and holds its shape against the serious boost pressures running through it. Speaking of shape, the Mishimoto performance intercooler pipe is designed with a unique elliptical shape to accommodate for an upgrade to the Mishimoto performance radiator.Our silicone piping also features a 2.5-inch inner diameter, increasing volume 10-percent over the stock piping and resulting in a 40-percent increase in flow. The Mishimoto performance cold-side intercooler pipe includes two high-torque worm gear clamps to ensure a secure connection, and is covered under the Mishimoto Lifetime Warranty. |
| Description_SHO |
Turbo Intercool Pipe |
| SellingPoint03 |
40-percent greater flow than stock cold-side pipe |
| SellingPoint06 |
Rigid silicon construction prevents pipe movement under heavy load |
| TechSpec Outlet (in) |
2.5 |
| TechSpec Weight (lbs) |
N/A |
| Install Difficulty |
N/A |
| SellingPoint01 |
Direct fit for the 2013-2018 Ford Focus ST |
| SellingPoint04 |
10-percent increase in volume over stock cold-side pipe |
| SellingPoint05 |
Elliptical shape to accommodate for larger Mishimoto radiator |
| SellingPoint13 |
N/A |
| SellingPoint14 |
N/A |
| TechSpec Applications |
Ford Focus ST, 2013-2018 |
| TechSpec Chassis Codes |
N/A |
| TechSpec Engine Codes |
N/A |
| TechSpec Includes |
(1) Silicone Pipe--(2) High-Torque Worm Gear Clamps--Mishimoto Lifetime Warranty |
| TechSpec Inlet (in) |
2.5 |
| TechSpec Maximum Recommended Boost Pressure (PSI) |
N/A |
| TechSpec Maximum Recommended Horsepower |
N/A |
| SellingPoint02 |
One-piece design for uninterrupted airflow, easy installation, and minimizing boost leaks |
| SellingPoint07 |
Available in black |
| SellingPoint08 |
Mishimoto Lifetime Warranty |
| SellingPoint09 |
N/A |
| SellingPoint10 |
N/A |
| SellingPoint11 |
N/A |
| SellingPoint12 |
N/A |
| SellingPoint15 |
N/A |
| TechSpec Centerline Radius |
N/A |
| TechSpec Core Height (in) |
N/A |
| TechSpec Core Length (in) |
N/A |
| TechSpec Core Thickness (in) |
N/A |
| TechSpec Core Type |
N/A |
| TechSpec Installation Notes |
27 in-lbs (3NM) recommended for all T-bolt and constant-tension T-bolt clamps. These clamps have an operating range of 18-35 in-lbs (2-4NM). Do not exceed the maximum torque rating of 35 in-lbs (4NM). |
| TechSpec Note |
N/A |
| TechSpec Overall Height (in) |
N/A |
| TechSpec Overall Length (in) |
N/A |
| TechSpec Overall Width (in) |
N/A |
| TechSpec Pipe Diameter |
N/A |
| TechSpec Pipe Length |
N/A |
| TechSpec Pipe Shape |
N/A |
| Length |
5.0000 |
| Width |
10.0000 |
| Height |
22.0000 |
| Weight |
8.0000 |
