| Description_ASM |
2017-2020 Honda Civic Si |
| Description_DEF |
Engine Cold Air Intake |
| Description_CAP |
- |
| Description_DES |
Honda Civic Si Performance Intake, 2017-2020 |
| Description_EXT |
Performance Air Intake, fits Honda Civic Si, 2017-2020 |
| Description_MKT |
Our performance air intake for the 2017-2020 Honda Civic Si is finally here! This intake was engineered specifically for the new turbocharged Civic and is a direct-fit modification that will provide enhanced engine performance and improved throttle response ? plus it will add a little flair under the hood! This intake has a unique and aggressive tone under acceleration and boost that will be very noticeable. The steel wire reinforced silicone intake arm improves airflow and keeps intake air temperatures under control as opposed to an aluminum design. The black-powdercoated steel airbox covers and protects the Mishimoto high performance air filter from engine bay heat and eliminates the possibility of hydrolock with the placement being closer to the hood. The box makes use of the stock air diverter found right underneath the hood that directed airflow into the stock airbox. The MAF housing has a venturi-style inlet, bringing in much smoother airflow compared to the conventional MAF housing design. This intake makes consistent dyno-proven gains of about 4hp and 4ft-lbs of torque and was designed in the USA at our Delaware headquarters. This unit is a complete bolt-on part that functions perfectly with the stock tune and includes the Mishimoto Lifetime Warranty, ensuring superior product quality and craftsmanship. |
| Description_FAB |
Direct fit for 2017+ Honda Civic Si |
| Description_FAB |
Dyno-proven maximum gains of up to 4 whp and 4 wtq on the stock tune |
| Description_FAB |
37-percent increase in flow over the stock intake system |
| Description_FAB |
Aluminum CNC-machined MAF housing specifically designed for the Si sensor to retain safe air to fuel |
| Description_FAB |
Silicone elbow available in black, red, or blue |
| Description_KEY |
2017-2020 Honda Civic Si Mishimoto Performance Intake |
| Description_INV |
Mishimoto MMAI-CIV-17SIRD |
| Description_SHO |
Cold Air Intake |
| Description_TRA |
- |
| SellingPoint07 |
Powder-coated black airbox keeps unwanted hot air from entering the air filter |
| SellingPoint08 |
Mishimoto High-Flow Oiled Air Filter receives maximum airflow from the front of the vehicle |
| OptionLabel |
Red |
| Material |
Aluminum/Silicone |
| SellingPoint09 |
Silicone elbow available in black, red, or blue |
| SellingPoint10 |
Designed in Delaware, USA and filter made in USA |
| SellingPoint11 |
Mishimoto Lifetime Warranty |
| SellingPoint12 |
N/A |
| SellingPoint15 |
N/A |
| Title |
Mishimoto 2017-2020 Honda Civic Si Performance Intake |
| CARB EO Number |
D-759-8 |
| Color |
Red |
| Prop 65 (C, R or CR) |
CR |
| Prop 65 Yes/No |
Yes |
| SellingPoint01 |
Direct fit for the 2017-2020 Honda Civic Si |
| SellingPoint02 |
Dyno-proven maximum gains of up to 4 whp and 4 wtq on the stock tune |
| SellingPoint03 |
37-percent less restrictive than stock intake system |
| SellingPoint04 |
Smooth design eliminates restrictions and improves airflow |
| SellingPoint06 |
Aluminum intake pipe includes CNC-machined MAF housing |
| SellingPoint13 |
N/A |
| TechSpec Applications |
2017-2020 Honda Civic Si |
| TechSpec Caution |
N/A |
| TechSpec Engine Codes |
L15B7 |
| TechSpec Filter Diameter |
N/A |
| TechSpec Includes |
(1) Aluminum MAF Housing--(1) Steel Airbox w/ Protective Eding--(1) Silcone Turbo Inlet Hose--(1) High-Flow, Oiled Filter--(2) Worm Gear Clamps--Mounting Hardware--Mishimoto Lifetime Warranty |
| TechSpec Note |
N/A |
| Install Difficulty |
2 |
| Installation Difficulty |
2 |
| Prop 65 - Short Label |
prop65_warning.jpg |
| SellingPoint05 |
Highly aggressive intake tone under acceleration |
| SellingPoint14 |
N/A |
| TechSpec Air Filter Part Number |
MMAF-2756 |
| TechSpec Chassis Codes |
FC4--FC5 |
| Length |
10.0000 |
| Width |
20.0000 |
| Height |
20.0000 |
| Weight |
11.0000 |
