The K&N 69-6501TP Typhoon cold-air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Mitsubishi Eclipse and Eclipse GT models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon cold-air intake which is designed to pull in outside air and dramatically reduce air flow restriction by smoothing and straightening air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-6501TP cold-air intake consists of a black rubber topped K&N high-flow air filter that mounts near the driver side wheel well directing outside air through free-flowing aluminum tubing into a short ram induction tube that delivers high volumes of clean air into the engine's throttle body for a guaranteed power gain. The oversized cone shaped air filter comes with a water repellent DryCharger filter wrap to protect the filter from moisture. The air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This cold air intake is relatively easy to install usually in 90 minutes or less. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the vehicle applications and specific CARB status for each vehicle and air intake.
Specifications:
| Description_DEF |
Engine Cold Air Intake Performance Kit |
| Description_DES |
Performance Air Intake System |
| Description_EXT |
K&N's easy-to-install Typhoon cold-air intake system replaces the restrictive factory air filter and air intake housing delivering a guaranteed power gain. The low-restriction aluminum intake tubes come in a chrome-like finish. |
| Description_INV |
Performance Air Intake System |
| Description_MKT |
The K&N 69-6501TP Typhoon cold-air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Mitsubishi Eclipse and Eclipse GT models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon cold-air intake which is designed to pull in outside air and dramatically reduce air flow restriction by smoothing and straightening air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-6501TP cold-air intake consists of a black rubber topped K&N high-flow air filter that mounts near the driver side wheel well directing outside air through free-flowing aluminum tubing into a short ram induction tube that delivers high volumes of clean air into the engine's throttle body for a guaranteed power gain. The oversized cone shaped air filter comes with a water repellent DryCharger filter wrap to protect the filter from moisture. The air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This cold air intake is relatively easy to install usually in 90 minutes or less. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the vehicle applications and specific CARB status for each vehicle and air intake. |
| Description_SHO |
Air Intake System |
| Warranty |
No-Hassle Lifetime Limited |
| Weight |
8.2 lb (3.7 kg) |
| Air Filter Color |
Red |
| Prop 65 - Short Label |
WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov |
| Prop 65 (C, R or CR) |
CR |
| System Type |
Complete Cold-Air Intake System |
| CARB EO Number |
D-269-32 |
| Street Legal In All US States |
Yes |
| Clamp Color/Finish |
Natural |
| Air Filter Outlet Shape |
Round |
| Mass Air Flow Sensor Adapter Included |
No |
| Clamp Material |
Stainless Steel |
| Package Type |
Box |
| Prop 65 Yes/No |
Yes |
| Mounting Hardware Included |
Yes |
| Replacement Filter |
RU-4730 |
| Package Material |
Paperboard |
| RPM |
5800 |
| Horse Power Increase |
7 HP |
| Clamps Included |
7 |
| Air Filter Washable |
Yes |
| Intake Pipe Color / Finish |
Polished |
| TUV Approved (Europe) |
No |
| Coupler Color/Finish |
Black |
| Clamp Style |
Regular |
| Intake Pipe Material |
Aluminum |
| Product Style |
69 Series Typhoon Kits |
| Air Filter Material |
Cotton Gauze |
| Title |
K&N 69-6501TP Performance Air Intake System |
| Oil Included |
Yes |
| Prop 65 Warning Label |
https://www.knfilters.com/images/l/prop65.jpg |
| Couplers Included |
3 |
| Air Box Included |
No |
| Intake Pipe Ports |
All intake tube ports needed for the specified applications are included |
| Estimated Horsepower Gain |
6.9 HP @ 5800 RPM |
| Length |
9.0000 |
| Width |
15.0000 |
| Height |
18.0000 |
| Weight |
8.0000 |
