As the leader in forged racing pistons, JE Pistons has applied over 75 years of experience to its wide range of premium forged pistons for domestic applications. Engineered, forged and machined 100% in the USA, JE Pistons are designed for each specific engine and racing application to provide the ultimate combination of durability and performance. From dirt track to drag strip, JE Pistons performance is proven in victory lane time and time again. Equip your engine with the best in forged pistons.
Specifications:
| Description_ASM |
Chevrolet LS |
| Description_DEF |
Engine Piston |
| Description_DES |
Piston Single, 2618, Dome, 4.010 Bore, 1.340 CD, 0.945 Pin, Set of 1. |
| Description_EXT |
JE, Chevrolet, LS Gen III/IV, 4.010 in. Bore, 1.340 CD, Dome, Right Piston |
| Description_FAB |
- Forged in the USA using 2618 aluminum, yielding high tensile strength needed for high-demand performance applications
- Designed specifically for each engine and use application to provide optimized performance durability
- Proprietary Forged Side Relief (FSR) forging design minimizes friction and power loss with reduced skirt width and saves additional weight with a shorter wrist pin
- Skirt coating (depending on application) reduces friction and wear on piston skirts and cylinder walls while simultaneously reducing operating noise
- Accumulator groove (depending on application) helps reduce pressure from combustion gases, reducing ring fluttering and improving ring seal for consistent power
- Made 100% in the USA
|
| Description_MKT |
As the leader in forged racing pistons, JE Pistons has applied over 75 years of experience to its wide range of premium forged pistons for domestic applications. Engineered, forged and machined 100% in the USA, JE Pistons are designed for each specific engine and racing application to provide the ultimate combination of durability and performance. From dirt track to drag strip, JE Pistons? performance is proven in victory lane time and time again. Equip your engine with the best in forged pistons. |
| Description_SHO |
Piston |
| Description_TLE |
Chevrolet LS, 4.010 Bore, Dome, Set of 1 |
| Description_INV |
JE Pistons, Piston |
| Add-On |
JG3108-4010-4 |
| Add-On |
945-2250-15-51C |
| Add-On |
945-073-MW |
| Bore Diameter |
4.010 |
| Oil Ring Thickness |
0.1175 |
| Compression Height |
1.340 |
| Engine Type |
ICE |
| Forging Type |
FSR |
| Category Hierarchy |
Auto>JE Pistons>Single Replacement Pistons>Domestic |
| Engine |
LS Gen III/IV |
| Cylinder Head |
GM LS1 15 DEG |
| Industry |
Automotive |
| Make |
CHEVROLET |
| Engine - Web |
LS Gen III/IV |
| Make - Web |
Chevrolet |
| Product Market |
Domestic |
| Piston Head Type |
Dome |
| Piston Volume |
11.70 |
| Piston Material |
2618 |
| Piston Average Weight |
457 |
| Piston Orientation |
Right |
| Out of Stock Message |
Call for Availability |
| Prop 65 Yes/No |
Yes |
| Piston Series |
JE Pistons |
| Piston Pin Material |
5115 |
| Piston Quantity |
1 |
| Piston Pin Length |
2.250 |
| Prop 65 (C, R or CR) |
CR |
| Product Type |
Engine Piston |
| Piston Pin Outside Diameter |
0.945 |
| Piston Pin Wall Thickness |
0.150 |
| Prop 65 - Short Label |
Prop 65 Warning Label.JPG |
| Ringset Included |
No |
| Top Compression Ring Thickness |
0.0480 |
| Title - Web |
JE Pistons Chevrolet LS Gen III/IV Piston - 4.010 in. Bore - 1.340 in. CH, 11.70 CC |
| Second Compression Ring Thickness |
0.0600 |
| Title |
JE Pistons - Chevrolet, LS Gen III/IV, 4.010 in. Bore, Piston |
| Wrist Pin Material |
5115 Low Carbon Steel, Case Hardened |
| Wrist Pin Length |
2.250 |
| Wrist Pin Outer Diameter |
0.945 |
| Ring Set Included |
No |
| Wrist Pin Wall Thickness |
0.150 |
| Length |
5.0000 |
| Width |
5.0000 |
| Height |
5.0000 |
| Weight |
1.0000 |
