The Hurst (R) Roll/Control (R), Line/Loc (R) for your 2011-2014 Dodge Challenger SRT8 is primarily used in drag racing to lock the front wheels allowing for more consistent burnouts when heating up the tires to make a pass. This kit comes with all the necessary parts needed to easily install a Hurst Line/Loc system on your Challenger SRT8. Includes a stainless steel Roll/Control valve, brake line, fittings, lighted momentary switch, bracket, wiring and much more. Rigorous testing has proved a 1/100,000 of a second release time and vibration tests have seen up to 30 G's applied without mechanical failure. Adaptable to most domestic and import hydraulic brake systems. Advanced quality design stainless steel valve assembly for ultimate corrosion resistance. Fully enclosed epoxy molded electrical coil for reliability. Attractive finned aluminum housing helps dissipate heat. Wider lightweight base provides better mounting stability 150 micron screen filtered ports to prevent contamination. Field serviceable for cleaning or rebuilding. Extra threaded port for separate bleeder or brake line pressure gauge Kit includes solenoid valve, snap-action switch, indicator light, 4-amp fuse, mounting screws and installation instructions. Note: Not recommended for use as a parking brake, or for longer then 60 seconds maximum at any one time.
Specifications:
| Description_ASC |
Fits 2011-2014 Dodge Challenger SRT8 |
| Description_DEF |
Brake Hydraulic Line Lock Kit |
| Description_DES |
Hurst Roll/Control, Line/Loc Kit - Dodge Challenger |
| Description_FAB |
Extra Threaded Port for Separate Bleeder or Brake Line Pressure Gauge |
| Description_FAB |
Stainless Steel Valve Assembly for Ultimate Corrosion Resistance |
| Description_FAB |
150 Micron Screen Filtered Ports help Prevent Contamination |
| Description_FAB |
Can be Used to Hold Brakes for Up to 60 Seconds Maximum |
| Description_FAB |
Attractive Finned Aluminum Housing Helps Dissipate Heat |
| Description_FAB |
Field Serviceable for Cleaning or Rebuilding |
| Description_FAB |
Fully Enclosed, Epoxy-Molded Coil |
| Description_KEY |
Hurst Shifters; performance; shifter; transmission; knob; linkage; kit; automatic; manual; roll control; 2011; 2012; 2013; 2014; dodge; challenger; drag; brake; lock; srt8; rt; rt |
| Description_INV |
Roll Control Direct Fit Kit 11-14 Challe |
| Description_EXT |
Roll/Control (R) Launch Control Kit; Incl. Solenoid Valve/Switch/Indicator Light/Hardware; 12 Volt; |
| Description_SHO |
Brake Launch Control |
| Description_MKT |
The Hurst (R) Roll/Control (R), Line/Loc (R) for your 2011-2014 Dodge Challenger SRT8 is primarily used in drag racing to lock the front wheels allowing for more consistent burnouts when heating up the tires to make a pass. This kit comes with all the necessary parts needed to easily install a Hurst Line/Loc system on your Challenger SRT8. Includes a stainless steel Roll/Control valve, brake line, fittings, lighted momentary switch, bracket, wiring and much more. Rigorous testing has proved a 1/100,000 of a second release time and vibration tests have seen up to 30 G's applied without mechanical failure. Adaptable to most domestic and import hydraulic brake systems. Advanced quality design stainless steel valve assembly for ultimate corrosion resistance. Fully enclosed epoxy molded electrical coil for reliability. Attractive finned aluminum housing helps dissipate heat. Wider lightweight base provides better mounting stability 150 micron screen filtered ports to prevent contamination. Field serviceable for cleaning or rebuilding. Extra threaded port for separate bleeder or brake line pressure gauge Kit includes solenoid valve, snap-action switch, indicator light, 4-amp fuse, mounting screws and installation instructions. Note: Not recommended for use as a parking brake, or for longer then 60 seconds maximum at any one time. |
| Installation Hardware Included |
Yes |
| Amperage Draw |
4 |
| Brand |
Hurst |
| Port Quantity |
1 |
| Inlet Port Gender |
Female |
| Emission Code |
5 |
| Inlet Thread Size |
1/8" |
| Mounting |
Screw-On |
| Material |
Stainless Steel |
| Automotive Item Grade |
High Performance |
| WARNING CA Proposition 65 |
No |
| Indicator Light Included |
Yes |
| Outlet Port Gender |
Female |
| Additional Contents |
Arming switch, fuse, momentary switch, fittings, intermediate brake lines, solenoid, wires, wire cover, bracket, wire connectors and mounting screws |
| Amp Rating |
4 |
| California Proposition 65 Chemical Name |
Chromium (hexavalent compounds), Lead |
| California Proposition 65 Required |
Yes |
| Inlet Ports |
1 |
| Lighted Switch |
Yes |
| Mounting Method |
Screw down |
| Outlet Thread Size |
1/8" |
| Product Type |
Brake Line Lock Kit |
| Switch |
Activation/Engagement Switch |
| Switch Actuation Type |
Push Button |
| Inlet Thread Type |
1/8 in. |
| Outlet Port Quantity |
3 |
| Outlet Size |
0.125 in. |
| Outlet Ports |
3 |
| Warning |
California Proposition 65 |
| Length |
3.3000 |
| Width |
11.5000 |
| Height |
15.8000 |
| Weight |
3.0500 |
