Full stainless steel exhaust system comes complete with stamped crossover for a broad torque curve, TIG welded stainless steel straight through designed absorption style mufflers, for applications over 450HP; single turn-down exit under each quarter panel for an stealthy look.
Specifications:
| Description_ASC |
"This exhaust system is designed for use on vehicles equipped with a stock rear suspension system only. It is directly compatible only with Hooker Blackheart LS swap headers and transmission crossmembers designed for stock front sub-frame equipped vehicles; it is not compatible with Hooker Blackheart LS swap headers, or transmission crossmembers, that are designed for use with a Detroit Speed front subframe. |
| Description_CAP |
Aggressive to moderate sound |
| Description_DEF |
Exhaust System Kit |
| Description_DES |
Hooker BlackHeart LS/LT Swap Header-Back Exhaust |
| Description_INV |
1967-69 CAMARO/FIREBIRD EXHAUST SYSTEM, |
| Description_EXT |
Blackheart Header-Back Exhaust System; Fits w/1967-69 F-Body w/LS Engines; Dual 3 in. Tubing; Dual Rear Side Exit; Incl. Tubing/X-Pipe/Ext. Pipes/Mufflers/Hardware; |
| Description_KEY |
hooker; exhaust; exhaust system |
| Description_FAB |
Each system is supplied with a high-efficiency stamped crossover & high-flow TIG-welded 304 SS absorption mufflers |
| Description_FAB |
OE quality hardware (clamps, hanger rods and rubber isolators) provided to ensure excellent fitment and a leak free installation |
| Description_FAB |
Provides compatibility with stock parking brake cables |
| Description_FAB |
Both kits are supplied with turn-down style exits under the rear quarter panels |
| Description_FAB |
Stainless steel straight through designed absorption mufflers for a muscle car sound without the resonance. |
| Description_FAB |
Constructed of mandrel bent stainless steel tubing |
| Description_FAB |
Works with Hooker long tube headers |
| Description_SHO |
Exhaust System Kit |
| Description_MKT |
Full stainless steel exhaust system comes complete with stamped crossover for a broad torque curve, TIG welded stainless steel straight through designed absorption style mufflers, for applications over 450HP; single turn-down exit under each quarter panel for an stealthy look. |
| Outlet Outside Diameter |
2.500 in. |
| WARNING CA Proposition 65 Message |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| System Type |
Header-back, Swap |
| Exit Style |
Straight |
| Tip Diameter |
N/A |
| Sound Level |
Aggressive / Moderate |
| Total Part VIO |
429839 |
| Brand |
Hooker BlackHeart |
| Tail Pipe Diameter |
3.000 in. |
| Exhaust Series |
Hooker BlackHeart |
| Outlet Diameter (in) |
3 |
| Product Type |
Exhaust System |
| Single Dual |
Dual |
| Subframe |
Stock |
| Tubing Diameter (in) |
3 |
| Type of Component |
Exhaust System |
| Warning |
California Proposition 65 |
| Sale Category |
Exhaust |
| WARNING CA Proposition 65 |
Yes |
| Material |
304 Stainless Steel |
| Exit Position |
Dual Rear |
| Exhaust Type |
Dual |
| Inlet Inside Diameter |
2.500 in. |
| Main Piping Diameter |
3.000 in. |
| Tube Diameter |
3.000 in. |
| Tubing Diameter |
3.000 in. |
| Application |
1967-69 Camaro/Firebird |
| Emission Code |
8 |
| Inlet Diameter (in) |
3 |
| Race Only |
Yes |
| Resonators |
No |
| Engine |
GM Gen III/IV/IV (LS/LT) |
| Finish |
Natural |
| Length |
17.0000 |
| Width |
21.0000 |
| Height |
53.0000 |
| Weight |
58.0000 |
