Your Small Town Parts Store With More!
×
Sold out
  • Guaranteed Fitment

    Always the correct part

  • In-House Experts

    We know our products

  • Added Value

    Performance matched parts

  • Nationwide Delivery

    Economy shipping

Holley 12-3000 VR2 Brushless Fuel Pump w/Controller-Single 16AN Inlet

2 sold in last 8 days
Holley
ds_BBVL_12-3000
Electric Fuel Pump
$3,909.47

customers are viewing this product
Holley 12-3000 VR2 Brushless Fuel Pump w/Controller-Single 16AN Inlet

Holley set the bar in 2011 with the release of the HP and Dominator in-line fuel pumps. In 2015, Holley has raised the bar again with the introduction of the VR1 and VR2 Brushless in-line fuel pumps. Featuring brushless pump technology and a twin screw rotor design, the VR1 and VR2 in-line fuel pumps are capable of high pressures and flows while maintaining a low amperage draw and quiet performance. Designed to work on high boosted race cars as well as your daily driven weekend endurance car, these pumps work with gasoline, methanol, and E-85* (Compatible for methanol and E85 for competitive drag race use only- when draining and flushing after each race event) and can maintain pressures of 130 PSI and up to 335 GPH flow**. Fueled by TI Automotive.

Specifications:

Description_ASC *Compatible for methanol and E85 for competitive drag race use only- when draining and flushing after each race event

* These pumps are not for use on aircraft of any type. * Overall pump dimensions: 9.5" Long; 4.75" Wide; 2.75" Tall These pumps do not have an internal bypass. A bypass style regulator and return line are required.

HP estimates are based on gasoline. Estimates calculated at 18.5V and at .5 BSFC NA and .65 BSFC FI. Individual systems will vary based on fuel system design, regulator type, fuel cell location, launch G's, etc.

Proper fuel system engineering is critical for maximum performance.

This pump is not designed to use a standard conical seat style union in the inlet or outlet of the pump. Example: Part # AT981510ERL. Use of this style fitting will block flow and WILL lead to poor performance and pump failure. The ONLY correct fitting to use is a contoured port fitting with an O-ring seal such as :Part # AT985010ERL.

Description_DEF Electric Fuel Pump
Description_EXT VR Series Billet Fuel Pump; VR-2; Capable Of 130psi.; Compatible w/Gas/Race Gas/Methanol/E85; Incl. Pump Controller; -16AN O-Ring Inlet/-10AN O-Ring Port Outlet;
Description_DES VR2 Brushless Fuel Pump w/Controller-Single 16AN Inlet
Description_SHO Fuel Pump Electric
Description_FAB Capable of 130 PSI while providing significant flow for forced induction applications where belt driven pumps are normally used.
Description_FAB Unlike other pumps, the VR Series are built for continuous duty if needed.
Description_FAB The dual pump models are designed for endurance racing where both pumps are used or one can be a reserve pump.
Description_FAB Billet aluminum construction for durability and good looks
Description_FAB Features a single 16 AN O-ring inlet and a single 10 AN O-ring outlet
Description_FAB High flow and high pressure with low amperage draw
Description_FAB Can be fully submerged in the fuel cell or chassis mounted
Description_FAB Maximum amp draw of 38 AMPS for the VR2
Description_FAB Holley also offers a complete line of fuel filters and fuel pressure regulators that are designed to work as a system with these pumps
Description_KEY Walbro; TI Automotive; Brushless; Bugatti; Veyron; Walbro 7.00228.51; E3LM ;
Description_INV FUEL PUMP, VR2-SINGLE INLET
Description_MKT Holley set the bar in 2011 with the release of the HP and Dominator in-line fuel pumps. In 2015, Holley has raised the bar again with the introduction of the VR1 and VR2 Brushless in-line fuel pumps. Featuring brushless pump technology and a twin screw rotor design, the VR1 and VR2 in-line fuel pumps are capable of high pressures and flows while maintaining a low amperage draw and quiet performance. Designed to work on high boosted race cars as well as your daily driven weekend endurance car, these pumps work with gasoline, methanol, and E-85* (Compatible for methanol and E85 for competitive drag race use only- when draining and flushing after each race event) and can maintain pressures of 130 PSI and up to 335 GPH flow**. Fueled by TI Automotive.
Description_MKT The pumps include a 2 step controller for pump speed control.
Description_MKT The pumps can be ran in one of two different speeds. A low speed
Description_MKT control for low fuel consumption requirements or at full speed
Description_MKT for high fuel consumption requirements. The VR2 includes (2) controllers for precise control of both pumps independently of each other. Both the VR1 and VR2 pumps are proven for 18.5V compatibility.
Description_MKT **At 13.8V
Description_MKT * Overall pump dimensions: 9.5" Long; 4.75" Wide; 2.75" Tall
Outlet Size 10 AN O-ring
Housing Color Black
Brand Holley
Free Flow GPH 335 @ 13.8 Volts
Body Color Black
Emission Code 5
Free Flow LPH 1250
Fuel System Carbureted, EFI
Fuel Type E85, Gasoline, Methanol
Product Type Fuel Pump
WARNING CA Proposition 65 Message WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Material Aluminum
Fully Open 1250
Fuel System Type Carbureted
WARNING CA Proposition 65 Yes
Application Universal
Inlet Size 16 AN O-ring
Pump Body Color Black
Warning California Proposition 65
Length 5.0000
Width 12.3000
Height 17.9000
Weight 10.3000
Read More
Read Less
We use cookies to improve your experience on our website. Read about how we use cookies in our Privacy Policy. By browsing this website, you agree to our use of cookies. privacy policy
accept

Your cart

×