Description_ASC |
It is recommended to use a Holley 12-753 30 Amp Fuel Pump Relay along with a minimum size of 12 Gauge wire for your installation.
*** Maximum 6AN line and fitting size due to space limitations between unit and fuel tank. |
Description_DEF |
Fuel Pump Module Assembly |
Description_DES |
Holley Diecast In-Tank RetroFit Fuel Module Returnless System |
Description_FAB |
The easiest way to convert your vehicle to an in-tank, EFI fuel system |
Description_FAB |
Installs in any fuel tank from 7" to 12" deep to fit a wide variety of applications |
Description_FAB |
The low profile 5 inch diameter design is only 1.275 inches thick above the tank mounting surface for added clearance when needed |
Description_FAB |
The innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit |
Description_FAB |
The clamping system allows you to rotate the unit 360 degrees for easier clocking of the plumbing and wiring locations under your ride |
Description_FAB |
Die cast aluminum construction for corrosion resistance and long lasting good looks |
Description_FAB |
┬╝" NPT ports for a wide variety of plumbing options |
Description_FAB |
Ideal for Terminator EFI, Sniper EFI, MSD Atomic EFI or any TBI of EFI conversion |
Description_FAB |
Optional roll over valve available |
Description_FAB |
Two different fuel pumps are available to match your requirements - 255LPH or 450LPH for both return and returnless style systems |
Description_KEY |
Fuel tank; drop in; efi fuel; fuel pump; efi fuel pump; convert; in-tank; |
Description_INV |
DIE CAST RETROFIT PUMP HNGR-RTRNLS 450 |
Description_EXT |
In-Tank Retrofit Fuel Module; 450 LPH; Returnless Style; Install In Any Tank From 7 in. To 12 in. Deep; |
Description_SHO |
FuelPmpModAssy |
Description_MKT |
Are you interested in an EFI retrofit kit, but just can't get past the complication of the fuel system? Holley is proud to introduce their Universal In-Tank Retrofit Fuel Modules! Available in return and returnless versions, you can rest assured Holley has the solution you need for your EFI fuel pump woes. |
Description_MKT |
Now you can convert your factory tank or fuel cell to an in-tank EFI fuel system quickly and easily! The conversion is easily accomplished with basic tools and requires no welding or fabrication. The aluminum module 5 inch diameter design includes a die cast pump hanger bracket to control pump vibration while also providing a low profile design to fit where space is at a premium. Holley's innovative clamping system and integrated fuel pump makes it easy. Once installed, hook up your fuel lines and your power source/ground and you're off and running! NO hassle! |
Description_MKT |
Supports up to 875 EFI or 1100 Carb HP (@ 60 PSI at 13.5 Volts / 16.9 AMP Draw) Of course there are many variables, estimates are based on gasoline. Individual systems will vary based on fuel system design, regulator type, fuel cell location, etc... |
Sale Category |
Air and Fuel Delivery |
Clearance Category |
Air and Fuel Delivery |
Warning |
California Proposition 65 |
WARNING CA Proposition 65 Message |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
Brand |
Holley |
WARNING CA Proposition 65 |
Yes |
Emission Code |
3, 5 |
Free Flow LPH |
450 |
NPT Thread |
1/4 NPT |
Product Type |
Fuel Pump Module |
Warranty |
Limited 90 Day |
Application |
Universal |
Discount Percentage |
26-50% |
Finish |
Black |
Fuel Type |
E85, Gasoline |
Material |
Die Cast Aluminum |
Minimum Fuel Tank Depth |
7 inches |
Length |
6.4000 |
Width |
6.4000 |
Height |
14.3000 |
Weight |
3.0000 |