Your Small Town Parts Store With More!
×
-11%
  • Guaranteed Fitment

    Always the correct part

  • In-House Experts

    We know our products

  • Added Value

    Performance matched parts

  • Nationwide Delivery

    Economy shipping

Holley 12-129 Diecast In-Tank Carbureted Retrofit Fuel Pump Module-Returnless System

2 sold in last 8 days
Holley
ds_BBVL_12-129
Electric Fuel Pump Repair Kit
$655.06 $577.99
$577.99

customers are viewing this product
Holley 12-129 Diecast In-Tank Carbureted Retrofit Fuel Pump Module-Returnless System

The Holley "red and blue" electric fuel pumps have been the performance standard for decades. They continue to perform well, however, the evolution of fuel pump technology has surpassed them in quiet operation and fuel delivery capabilities that an in-tank module can deliver. Looking ahead to the future, Holley has designed their latest retrofit pump module especially for the carbureted applications. The 5 inch diameter module design is very similar to the existing EFI pump modules using a 255 LPH pump, but includes a built-in regulator for lower fuel pressure that carburetor applications require. Now you can convert your factory tank or fuel cell to an in-tank fuel system quickly and easily! The conversion is easily accomplished with basic tools and requires no welding or fabrication. The aluminum module design includes a die cast pump hanger bracket to control pump vibration while also providing a low profile design to fit where space is at a premium. Holleys innovative clamping system and integrated fuel pump makes it easy. Once installed, hook up your fuel lines and your power source/ground and youre off and running! NO hassle! An added bonus is that you can upgrade this module if you eventually change to an EFI system by changing the internal regulator. Supports up to 700 Carb HP (@ 6 PSI at 13.5 Volts / 10.4 AMP Draw) Of course there are many variables, estimates are based on gasoline. Individual systems will vary based on fuel system design, fuel cell location, etc...

Specifications:

Description_ASC It is recommended to use a Holley 12-753 30 Amp Fuel Pump Relay along with a minimum size of 12 Gauge wire for your installation.
Description_DEF Electric Fuel Pump Repair Kit
Description_DES Holley Diecast In-Tank Carbureted RetroFit Fuel Pump Module-Returnless System
Description_INV DIE CAST RETROFIT CARB PUMP HNGR
Description_EXT 255 LPH Drop-In Retrofit Carbureted Fuel System Supports up to 700 Carb HP (HP Rating @ 6 PSI at 13.5 Volts / 10.4 AMP Draw)
Description_FAB The easiest way to convert your vehicle to an in-tank fuel system
Description_FAB Installs in any fuel tank from 6.5" to 12" deep to fit a wide variety of applications
Description_FAB The low profile 5 inch diameter design is only 1.275 inches thick above the tank mounting surface for added clearance when needed
Description_FAB The innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit
Description_FAB The clamping system allows you to rotate the unit 360 degrees for easier clocking of the plumbing and wiring locations under your ride
Description_FAB Die cast aluminum construction for corrosion resistance and long lasting good looks
Description_FAB ┬╝" NPT ports for a wide variety of plumbing options
Description_KEY Fuel tank; drop in; efi fuel; fuel pump; efi fuel pump; convert; in-tank;
Description_MKT The Holley "red and blue" electric fuel pumps have been the performance standard for decades. They continue to perform well, however, the evolution of fuel pump technology has surpassed them in quiet operation and fuel delivery capabilities that an in-tank module can deliver. Looking ahead to the future, Holley has designed their latest retrofit pump module especially for the carbureted applications. The 5 inch diameter module design is very similar to the existing EFI pump modules using a 255 LPH pump, but includes a built-in regulator for lower fuel pressure that carburetor applications require. Now you can convert your factory tank or fuel cell to an in-tank fuel system quickly and easily! The conversion is easily accomplished with basic tools and requires no welding or fabrication. The aluminum module design includes a die cast pump hanger bracket to control pump vibration while also providing a low profile design to fit where space is at a premium. Holleys innovative clamping system and integrated fuel pump makes it easy. Once installed, hook up your fuel lines and your power source/ground and youre off and running! NO hassle! An added bonus is that you can upgrade this module if you eventually change to an EFI system by changing the internal regulator. Supports up to 700 Carb HP (@ 6 PSI at 13.5 Volts / 10.4 AMP Draw) Of course there are many variables, estimates are based on gasoline. Individual systems will vary based on fuel system design, fuel cell location, etc...
Description_SHO FuelPmpElctRetroKit
Free Flow GPH 67
NPT Thread 1/4 NPT
Diameter 4.8"
Emission Code 3, 5
Free Flow LPH 255
Fuel Type Gasoline
WARNING CA Proposition 65 Message WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Application Universal
Brand Holley
Fuel System Type Gasoline
Material Die Cast Aluminum
Sale Category Air and Fuel Delivery
Warning California Proposition 65
WARNING CA Proposition 65 Yes
Product Type Fuel Pump
Warranty Limited 90 Day
Length 6.4000
Width 6.4000
Height 14.5000
Weight 2.9000
Read More
Read Less
We use cookies to improve your experience on our website. Read about how we use cookies in our Privacy Policy. By browsing this website, you agree to our use of cookies. privacy policy
accept

Your cart

×