Holley's new all aluminum 0-80459SA carburetor is designed for the rodder who needs 750 CFM of airflow, but only wants a single fuel inlet or is building a 2 x 4 setup. Its single feed fuel inlet, vacuum secondaries and electric choke make it amazingly universal. Don't trust your performance to just anyone, Holley is the only modular carburetor company that has been in business for over 100 years and has powered every NASCAR champion since the 60's.
Specifications:
| Description_ASC |
This model of carburetor has the square bore flange bolt pattern. It can replace Holley, Edelbrock, Carter AFB, and Autolite style carburetors with 5 3/16" x 5 5/8" bolt pattern. If you have a spreadbore style intake manifold, you will need an adapter to install this carburetor. Similar to the Mr. Gasket #1932. |
| Description_DEF |
Carburetor |
| Description_DES |
750 CFM Classic Holley Carburetor |
| Description_FAB |
Vibratory polished aluminum for good looks, weight savings and long lasting shine |
| Description_FAB |
Performance upgrade for stock to mildly modified vehicles |
| Description_FAB |
Universal calibration for easy bolt-on performance |
| Description_FAB |
Factory preset electric choke for easy startups |
| Description_FAB |
Vacuum secondaries for use on wide variety of vehicles. Compensate for all vehicle weights, gearing & transmissions to allow smooth opening of secondaries. |
| Description_FAB |
Single feed fuel inlet for easy installation |
| Description_FAB |
Compatible with GM, Chrysler, and Ford A/T kickdown linkage. Additional parts may be required. |
| Description_FAB |
Power valve blow-out protection |
| Description_FAB |
100% wet-flow tested by Holley technicians to assure it arrives ready to run! |
| Description_INV |
4160 750CFM UNIVERSAL POLISHED ALUMINUM |
| Description_EXT |
Street/Strip Carburetor; 4 bbl; 750 cfm.; 2 Circuit Metering; Model 4160; Vacuum Secondary; Electric Choke; Gasoline; Single Fuel Inlet; 1.688 in. Throttle Bore; Shiny Finish; |
| Description_SHO |
Carburetor |
| Description_MKT |
Holley's new all aluminum 0-80459SA carburetor is designed for the rodder who needs 750 CFM of airflow, but only wants a single fuel inlet or is building a 2 x 4 setup. Its single feed fuel inlet, vacuum secondaries and electric choke make it amazingly universal. Don't trust your performance to just anyone, Holley is the only modular carburetor company that has been in business for over 100 years and has powered every NASCAR champion since the 60's. |
| Finish |
Shiny |
| Warranty |
Limited 90 Day |
| Booster |
Straight |
| Billet Color |
None |
| Secondary Type |
Vacuum |
| Fuel Type |
Gasoline |
| Choke |
Electric |
| Flange |
Square Bore |
| Emission |
Without EGR |
| Barrels |
4 |
| Model |
4160 |
| Product Type |
Carburetor |
| WARNING CA Proposition 65 Message |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Barrel |
Four |
| Material |
Aluminum |
| Fuel Inlet |
Single |
| WARNING CA Proposition 65 |
Yes |
| Carburetor Type |
4160 |
| Condition |
New |
| Marine Use |
No |
| Throttle Bore |
1.688 inch |
| Warning |
California Proposition 65 |
| Primary Power Valve |
6.5 |
| Circuit |
2 |
| Type |
Automotive |
| Primary Main Jet |
64 |
| Brand |
Holley |
| Carburetor Use |
Street |
| Emission Code |
3 |
| Fuel |
Gasoline |
| Secondaries |
Vacuum |
| Supercharged Application |
No |
| Booster Type |
Straight |
| CFM |
750 |
| Usage |
Street/Strip |
| Primary Pump Nozzle Size |
31 |
| Sale Category |
Carburetors and Components |
| Length |
8.0000 |
| Width |
11.0000 |
| Height |
12.0000 |
| Weight |
8.0000 |
