Flowtech headers are the perfect combination of performance and value. Flowtech long tube headers are precision engineered using mandrel bent tubing, formed collectors and 5/16" flanges with sealing rings for a leak-free seal. All mounting hardware and gaskets are included for a simple installation. This header is coated in a high heat resistant black paint for a stealthy appearance.
Specifications:
| Description_ASC |
Modification to the stock shift linkage or installation of an aftermarket column shift cable assembly may be required on some applications.FLOWTECH,FLOWTECH,Breaking in an engine with ceramic coated headers WILL result in damage to the coating and will VOID all warranties. Ceramin coated headers require several heat cycles to fully cure before they will withstand extreme heat. Flowtech recommends using cast iron exhaust manifolds or old headers to break in new eingines to avoid coating damage. Please call Flowtech tech service at 270-781-9741. The use of header wraps can cause the header tubes to crack or rust due to excessive heat and moisture build-up. Flowtech does not recommend the use of header wraps as this will void the warranty. |
| Description_DES |
Flowtech Long Tube Header - Black Paint |
| Description_INV |
LTS CUTLASS/442 VISTA CRUISER |
| Description_EXT |
1978-1987 Oldsmobile Cutlass/442/Vista Cruiser: 260-403ci Standard Headers Primary Tube Collector Size 1.75 in. x 3 in. |
| Description_FAB |
Fuel Economy From The Engine |
| Description_FAB |
Leak Test For Max Performance |
| Description_FAB |
Mandrel-Formed Power Plenum |
| Description_FAB |
Leakproof O-Ringed Port Seals |
| Description_FAB |
Include All Mounting Hardware |
| Description_FAB |
Constructed of .049 cold roll flash mild steel tubing |
| Description_FAB |
Precision engineered for fit, performance and economy |
| Description_MKT |
Flowtech headers are the perfect combination of performance and value. Flowtech long tube headers are precision engineered using mandrel bent tubing, formed collectors and 5/16" flanges with sealing rings for a leak-free seal. All mounting hardware and gaskets are included for a simple installation. This header is coated in a high heat resistant black paint for a stealthy appearance. |
| Product Type |
Headers |
| Collector Diameter |
3.00 inch |
| Warning |
California Proposition 65 |
| CARB (California) Compliant |
No |
| Header Style |
Long Tube |
| Primary Tube Dia. |
1-3/4 inch |
| Bolt size |
3/8-16 x 3/4 |
| Brand |
Flowtech |
| Emission Code |
4 |
| Engine |
Oldsmobile V8 |
| Header Finish |
Black Paint |
| Tube Material |
Mild Steel |
| Length |
11.7000 |
| Width |
16.9000 |
| Height |
31.2000 |
| Weight |
26.6500 |
