The Force II® system is the perfect choice for the person who wants a subtle custom appearance with all the benefits and sound that a Flowmaster® single cat-back exhaust provides. The system delivers a moderate exterior tone and mild to moderate interior tone over the factory exhaust and ideally suited for customers looking for efficiency improvements without a lot of noise. This Force II system is a bolt-on system and bumps the tubing size up to a 3.00-inch mandrel-bent aluminized steel tubing flowing into the improved muffler design of the Super 50™ Series muffler over the stock exhaust. The mandrel-bent tailpipe uses the factory hanger locations making installation a breeze and is finished off with a 3.50-inch polished stainless steel tip. The Force II system is ideal for daily drivers and especially light towing applications such as boats and RV's. Designed for an easy fit, these systems include all necessary parts and hardware for easy installation you can do at home. Aluminized Steel exhaust systems are covered by our 3-year Limited Warranty Note: This Force II system is also available in Stainless Steel with a Lifetime Limited Warranty. Check out part# 817403. Fits both 2/4 wheel drive models and all wheelbases.
Specifications:
| Description_ASC |
Fits 2004-2008 Ford F-150 and Lincoln Mark LT trucks with 4.6L or 5.4L engine. Fits both 2/4 wheel drive models and all wheelbases. |
| Description_DES |
Flowmaster Force II Cat-back Exhaust System |
| Description_EXT |
2004-2008 Ford F-150 and Lincoln Mark LT trucks with 4.6L or 5.4L engine. - Mild sound |
| Description_INV |
04-08 FORD F-150 TRK F-II |
| Description_FAB |
Includes Hangers and Hardware for an Easy Installation |
| Description_FAB |
Mandrel-bent 16 Gauge Aluminized Steel Tubing |
| Description_FAB |
Large 3.50-inch Polished 304 Stainless Steel Tip |
| Description_FAB |
Dyno tuned for Maximum Performance |
| Description_FAB |
Super 50 Series Performance Muffler |
| Description_FAB |
Uses the Factory Hanger Locations |
| Description_FAB |
All Aluminized Steel Construction |
| Description_FAB |
Mild Exterior Exhaust Tone |
| Description_FAB |
3-year Limited Warranty |
| Description_FAB |
Minimal Interior Tone |
| Description_FAB |
Flowmaster Quality |
| Description_MKT |
The Force II® system is the perfect choice for the person who wants a subtle custom appearance with all the benefits and sound that a Flowmaster® single cat-back exhaust provides. The system delivers a moderate exterior tone and mild to moderate interior tone over the factory exhaust and ideally suited for customers looking for efficiency improvements without a lot of noise. This Force II system is a bolt-on system and bumps the tubing size up to a 3.00-inch mandrel-bent aluminized steel tubing flowing into the improved muffler design of the Super 50™ Series muffler over the stock exhaust. The mandrel-bent tailpipe uses the factory hanger locations making installation a breeze and is finished off with a 3.50-inch polished stainless steel tip. The Force II system is ideal for daily drivers and especially light towing applications such as boats and RV's. Designed for an easy fit, these systems include all necessary parts and hardware for easy installation you can do at home. Aluminized Steel exhaust systems are covered by our 3-year Limited Warranty Note: This Force II system is also available in Stainless Steel with a Lifetime Limited Warranty. Check out part# 817403. Fits both 2/4 wheel drive models and all wheelbases. |
| Muffler Quantity |
1 |
| Tail Pipe Diameter |
3.000 in. |
| Tubing Diameter (in) |
3 |
| Muffler Part Number |
53055 |
| Tip Diameter |
3.500 in. |
| System Type |
Cat Back |
| Brand |
Flowmaster |
| Exit Position |
Single Side Exit |
| Outlet Diameter (in) |
3 |
| Single Dual |
Single |
| Tip Diameter (in) |
3.5 |
| California Proposition 65 Chemical Name 2 |
Chromium (hexavalent compounds) |
| Exhaust Type |
Single |
| Muffler Series |
Super 50 Series |
| Exhaust Series |
Force II |
| Outlet Outside Diameter |
3.000 in. |
| Muffler Count |
1 |
| Tip Quantity |
1 |
| Emission Code |
5 |
| WARNING CA Proposition 65 |
Yes |
| Inlet Inside Diameter |
N/A |
| California Proposition 65 Chemical Name 1 |
Nickel (metallic) |
| Tubing Diameter |
3.000 in. |
| Heat Shield Attached |
No |
| Inlet Diameter |
3.000 in. |
| Title |
Flowmaster 17403 Cat-back System - Single Side Exit - Force II - Mild Sound |
| Material |
Aluminized Steel |
| Sound Level |
Mild |
| Exit Style |
Straight |
| Single or Dual |
Single |
| Outlet Diameter |
3.000 in. |
| WARNING CA Proposition 65 Message |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| 2WD/4WD |
2WD/4WD |
| California Proposition 65 Chemical Name |
Chromium (hexavalent compounds), Nickel (Metallic) |
| California Proposition 65 Required |
Yes |
| Heat Shield |
No |
| Inlet Diameter (in) |
3 |
| Product Type |
Exhaust System |
| Warning |
California Proposition 65 |
| Length |
12.3000 |
| Width |
17.2000 |
| Height |
58.0000 |
| Weight |
43.3000 |
