Edelbrock part #3721 Performer 302 intake manifold is designed for carbureted 302 c.i.d. Ford V8's with EGR. Replaces the stock 4V EGR manifold using the stock 4V adapter. Manifold can be adapted for 4V use by using our #8053 4V EGR plate and the OEM EGR valve and gasket. Our #8017 adapter kit and Ford #E4ZZ9A-589E spacer may be substituted for our #8053 EGR plate (1983-85 H.O. Mustangs/Capris come with this Ford spacer). For 4V off-highway non-EGR applications, use our #8714 spacer. Edelbrock carbs will work with Ford automatic overdrive trans (AOD) when used with Lokar bracket SRK-4000, for more info call (865) 966-2269 or go to www.lokar.com.
Specifications:
| Description_ABR |
Intake Mnfld |
| Description_ASM |
Ford:Small-Block Windsor:302 (5.0L) |
| Description_DEF |
Engine Intake Manifold |
| Description_LAB |
Performer Intake Manifold Small-Block Ford |
| Description_INV |
Performer 302 4V EGR Intake Manifold |
| Description_EXT |
Edelbrock Performer Intake Manifold for Ford 302 (4V) EGR Small-Block Ford 8.2 Deck V8 |
| Description_MKT |
Edelbrock part #3721 Performer 302 intake manifold is designed for carbureted 302 c.i.d. Ford V8's with EGR. Replaces the stock 4V EGR manifold using the stock 4V adapter. Manifold can be adapted for 4V use by using our #8053 4V EGR plate and the OEM EGR valve and gasket. Our #8017 adapter kit and Ford #E4ZZ9A-589E spacer may be substituted for our #8053 EGR plate (1983-85 H.O. Mustangs/Capris come with this Ford spacer). For 4V off-highway non-EGR applications, use our #8714 spacer. Edelbrock carbs will work with Ford automatic overdrive trans (AOD) when used with Lokar bracket SRK-4000, for more info call (865) 966-2269 or go to www.lokar.com. |
| Description_TRA |
Recommended intake gasket: Edelbrock #7220 |
| Description_TRA |
Carb recommendations: OEM 4-Bbl. Use #8011 if necessary, for automatic transmissions use #1483, #1490 or #1844. |
| Description_TRA |
Includes gaskets and 4-Bbl plate #8017 for sealing of OEM EGR plate and carburetor. |
| Description_TRA |
Manifold height: A-3.13", B-4.31" without EGR plates installed |
| Description_TRA |
Carb pad height: 3.72" |
| Description_TRA |
Port exit dimensions: .90" x 1.90" |
| Description_TRA |
Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS. |
| Description_TRA |
Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum. |
| Basic Operating RPM Range |
Idle-5500 |
| Grade Type |
Performance |
| Gasket Or Seal Included |
No |
| Front Maximum Height |
3.130 |
| Series |
Performer |
| EGR Port |
Yes |
| Material |
Aluminum |
| Rear Maximum Height |
4.310 |
| Single Or Dual Plane Type |
Dual |
| Center Maximum Height |
3.720 |
| Finish |
Satin |
| CNC Ported |
No |
| RGL |
WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov. |
| Flange Type |
4150 |
| Vehicle Model |
Ford |
| Length |
6.0000 |
| Width |
11.0000 |
| Height |
23.0000 |
| Weight |
17.0000 |
