Edelbrock part #2177 Performer-Plus camshaft is designed for small-block Chrysler 318-340-360 V-8 applications. This Edelbrock cam kit produced 305 ft-lbs. of torque when used with #2176 intake and stock iron cylinder heads on a 318 engine. The camshaft will produce optimum torque from the low-end to the mid-range, Performer-Plus camshafts match with Performer manifolds for vehicles operating from off-idle to 5500 rpm. This Performer-Plus is a smooth idling cam for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. All camshafts include flat tappet lifters, assembly lube and instructions. Camshaft Specifications: - Duration @ .050 Intake: 204 degrees - Duration @ .050 Exhaust: 204 degrees - Lift @ Valve Intake: .420" - Lift @ Valve Exhaust: .420" - Lobe Separation: 110 Degrees - Intake Centerline: 106 Degrees - Idle Vacuum @ 1000 RPM's: 16"
Specifications:
| Description_ABR |
Cam Lift kit |
| Description_ASM |
Chrysler:Small-Block LA-Series:273 (4.5L)/318 (5.2L)/340 (5.6L)/360 (5.9L) |
| Description_DEF |
Engine Camshaft and Lifter Kit |
| Description_EXT |
Edelbrock part #2177 Performer-Plus camshaft is designed for small-block Chrysler 318-340-360 V-8. This Edelbrock cam kit produced 305 ft-lbs. of torque when used with #2176 intake and stock iron cylinder heads on a 318 engine. |
| Description_INV |
Edelbrock Performer-Plus Camshaft Kit |
| Description_MKT |
Edelbrock part #2177 Performer-Plus camshaft is designed for small-block Chrysler 318-340-360 V-8 applications. This Edelbrock cam kit produced 305 ft-lbs. of torque when used with #2176 intake and stock iron cylinder heads on a 318 engine. The camshaft will produce optimum torque from the low-end to the mid-range, Performer-Plus camshafts match with Performer manifolds for vehicles operating from off-idle to 5500 rpm. This Performer-Plus is a smooth idling cam for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. All camshafts include flat tappet lifters, assembly lube and instructions. Camshaft Specifications: - Duration @ .050 Intake: 204 degrees - Duration @ .050 Exhaust: 204 degrees - Lift @ Valve Intake: .420" - Lift @ Valve Exhaust: .420" - Lobe Separation: 110 Degrees - Intake Centerline: 106 Degrees - Idle Vacuum @ 1000 RPM's: 16" |
| Description_LAB |
Edelbrock Performer-Plus camshaft for Small-Block Chrysler 318-340-360 V-8 |
| Description_TRA |
Recommended Valve Springs for OEM heads: Edelbrock part #5877 non-rotator/# 5977 Rotator |
| Description_TRA |
Not for 1985 and later engines with roller lifters. |
| Description_TRA |
In order for this Performer-Plus cam and lifter kit to be covered under ANY WARRANTY you must use either the correct Edelbrock Sure Seat valve springs or the stock original equipment valve springs. |
| Description_TRA |
Oil/additive must contain Zinc designed for use with flat tappet camshafts. |
| Description_TRA |
Coat cam lobes and bottoms of each lifter with MoS2 lube (supplied) to prevent cam lobe and lifter wear from occurring during initial start-up. |
| Description_TRA |
Do not allow the engine to run under 2000 rpm for the first 1/2 hour. Slow idle speeds may result in severe cam and lifter wear. Start the engine and bring to break-in rpm. |
| Exhaust Valve Lift |
0.420 |
| Lifter Type |
Hydraulic |
| Advertised Exhaust Duration |
270 |
| Exhaust Duration at .050 inch Lift |
204 |
| Computer Controlled Compatible |
No |
| Advertised Intake Duration |
270 |
| Cam Type |
Cast |
| Lobe Separation |
110 |
| Grade Type |
Performance |
| RGL |
WARNING: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov. |
| Intake Valve Lift |
0.420 |
| Lifter Materials |
Hardened Steel |
| Intake Duration .050 Inch Lift |
204 |
| Length |
4.0000 |
| Width |
8.0000 |
| Height |
27.0000 |
| Weight |
15.0000 |
