Edelbrock part #21211 Performer 289 intake manifold is designed for street 260-289-302 c.i.d. Ford V8's without EGR. Will not fit Boss 302 or 255 c.i.d. V8's. Edelbrock carbs will work with Ford automatic overdrive trans (AOD) when used with Lokar bracket SRK-4000, for more info call (865) 966-2269 or go to www.lokar.com. This manifold offers a polished finish for a brilliant shine and classic look.
Specifications:
| Description_ABR |
Intake Mnfld |
| Description_ASM |
Ford:Small-Block Windsor:289 (4.7L)/302 (5.0L) |
| Description_DEF |
Engine Intake Manifold |
| Description_EXT |
Edelbrock Performer Intake Manifold for Ford 260-302 Small-Block V8 |
| Description_INV |
Polished Per Intake Manifold SBF 260-302 |
| Description_MKT |
Edelbrock part #21211 Performer 289 intake manifold is designed for street 260-289-302 c.i.d. Ford V8's without EGR. Will not fit Boss 302 or 255 c.i.d. V8's. Edelbrock carbs will work with Ford automatic overdrive trans (AOD) when used with Lokar bracket SRK-4000, for more info call (865) 966-2269 or go to www.lokar.com. This manifold offers a polished finish for a brilliant shine and classic look. |
| Description_LAB |
Performer 289 Intake Manifold for Small-Block Ford, Polished Finish |
| Description_TRA |
Recommended intake gasket: Edelbrock #7220 |
| Description_TRA |
Manifold height: A-3.50", B-4.75" |
| Description_TRA |
Carb pad height: 4.12" |
| Description_TRA |
Carb recommendations: Edelbrock AVS2 or Performer Series 500-650 cfm. |
| Description_TRA |
Port exit dimensions: 1.09" x 1.84" |
| Description_TRA |
Due to the design of Performer manifolds, the throttle and kickdown bracket on some vehicles may require modification to fit. When using Edelbrock carburetors, use Edelbrock #1490 or 1845 throttle plate kit. |
| Description_TRA |
Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS. |
| Description_TRA |
Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum. |
| Rear Maximum Height |
4.750 |
| Finish |
Polished |
| EGR Port |
No |
| CNC Ported |
No |
| RGL |
WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov. |
| Flange Type |
4150 |
| Gasket Or Seal Included |
No |
| Series |
Performer |
| Basic Operating RPM Range |
Idle-5500 |
| Center Maximum Height |
4.120 |
| Front Maximum Height |
3.500 |
| Vehicle Model |
Ford |
| Material |
Aluminum |
| Single Or Dual Plane Type |
Dual |
| Grade Type |
Performance |
| Length |
6.0000 |
| Width |
11.0000 |
| Height |
22.0000 |
| Weight |
17.0000 |
