Edelbrock Part PN 2121-BP Performer intake manifold is designed for street Small-Block Ford 260-289-302 CID V8's without EGR. Edelbrock's Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response from off-idle through 5500rpm. The Performer intake manifolds are ideal for passenger cars, trucks, 4x4s, tow vehicles and RVs. This PN 2121-BP version comes with a beautiful reflective Black Plasma finish that is durable and easy to maintain. The Plasma finishes are applied by a fully automated 7 stage prewash and 4 stage finish. A durable clear powder coat finises the process. Edelbrock carbs will work with Ford automatic overdrive trans (AOD) when used with Lokar bracket SRK-4000. For more info go to www.lokar.com. Will not fit Boss 302 or 255 c.i.d. V8's.
Specifications:
| Description_ABR |
Intake Mnfld |
| Description_ASM |
Ford Small-Block: 260-289-302 (5.0L) |
| Description_DES |
Edelbrock Performer Intake Manifold for Small-Block Ford, Black Plasma Finish |
| Description_DEF |
Engine Intake Manifold |
| Description_MKT |
Edelbrock Part PN 2121-BP Performer intake manifold is designed for street Small-Block Ford 260-289-302 CID V8's without EGR. Edelbrock's Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response from off-idle through 5500rpm. The Performer intake manifolds are ideal for passenger cars, trucks, 4x4s, tow vehicles and RVs. This PN 2121-BP version comes with a beautiful reflective Black Plasma finish that is durable and easy to maintain. The Plasma finishes are applied by a fully automated 7 stage prewash and 4 stage finish. A durable clear powder coat finises the process. Edelbrock carbs will work with Ford automatic overdrive trans (AOD) when used with Lokar bracket SRK-4000. For more info go to www.lokar.com. Will not fit Boss 302 or 255 c.i.d. V8's. |
| Description_LAB |
Edelbrock Performer Intake Manifold for Small-Block Ford, Black Plasma Finish |
| Description_EXT |
Edelbrock PN 2121-BP Performer intake manifold is designed for SB 289-302 Ford V8. Perfect for Mustangs, Ranchero's, Bronco's etc or anyone looking for great torque and HP from idle to 5500 rpm with a beautiful Black Plasma finish. |
| Description_INV |
Manifold |
| Description_INV |
SBF Performer -Black Plasma |
| Description_TRA |
Recommended intake gasket: Edelbrock #7220 |
| Description_TRA |
Manifold height: A-3.50", B-4.75" |
| Description_TRA |
Carb pad height: 4.12" |
| Description_TRA |
Carb recommendations: Edelbrock AVS2 or Performer Series 500-650cfm, for automatic transmissions use #1483 & #1490 or #1844. Port exit dimensions: 1.09" x 1.84" |
| Description_TRA |
Due to the design of Performer manifolds, the throttle and kickdown bracket on some vehicles may require modification to fit. Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEAL GASKETS. Will not fit 255 c.i.d. V8. Use Edelbrock #8524 intake manifold bolt kit which includes hardened washers to ensure proper torque and prevent galling of the aluminum. |
| Description_SHP |
None |
| Grade Type |
Performance |
| Basic Operating RPM Range |
Idle-5500 |
| Series |
Performer |
| Flange Type |
4150 |
| RGL |
WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov. |
| Vehicle Model |
Ford |
| EGR Port |
No |
| Finish |
Black Plasma |
| Length |
6.0000 |
| Width |
11.0000 |
| Height |
23.0000 |
| Weight |
17.0000 |
