The industry's most reliable forced induction system is now available for the 2018-2020 Jeep Wrangler JL and Gladiator JT with the 3.6L Pentastar V6 engine. The Edelbrock Supercharger #152840 W/O Tuner is engineered to deliver a 46% increase in rear-wheel horsepower with 26.9% more rear-wheel torque in a 50-state emissions-legal bolt-on kit that fits under the factory hood with no modification. This kit features the latest TVS R1320 rotor assembly in an Edelbrock supercharger housing mated to a lower manifold with a high-capacity dual-pass intercooler. An integrated bypass valve helps to eliminate parasitic power loss under light throttle while helping to improve mileage potential under normal driving conditions. This kit comes with all necessary hardware, hoses and full-color installation manual to simplify the installation. The hand-held tuner is not included with kit #152840. Order #15284 for the Supercharger Kit with tuner. Edelbrock Superchargers for 2018-20 Jeep JL/JT are manufactured by Edelbrock in the USA and include a free 3-Year/36,000-mile powertrain warranty. Not compatible with eTorque Hybrid models.
Specifications:
| Description_ABR |
SuperchrgrKt |
| Description_ASM |
Jeep:Pentastar V6:220 (3.6L) |
| Description_DEF |
Supercharger Kit |
| Description_DES |
Supercharger #152840 for 2018-2020 Jeep Wrangler JL and Gladiator JT W/O Tune |
| Description_INV |
Supercharger #152840 for 2018-2020 JL/JT |
| Description_EXT |
Edelbrock Supercharger #152840 W/O Tuner for 2018-20 Jeep Wrangler JL/Gladiator JT with the 3.6L Pentastar V6 engine. 50-state emissions-legal and fits under the factory hood with no modification. Not compatible with eTorque Hybrid models. |
| Description_TRA |
Supercharger systems sold without tuners are only emissions legal when used with the correct Edelbrock program, which can be downloaded at www.edelbrock.com. For safety, the Edelbrock supplied program will retain the factory vehicle speed limiter setting. |
| Description_TRA |
Calibrations, Tuners, or Programs supplied with supercharger systems are only compatible with vehicles designed for use in the United States or Canada. Edelbrock does not offer calibration support for any vehicle designed for use outside of the United States or Canada. Not compatible with eTorque Hybrid models. |
| Description_LAB |
Supercharger #152840 for 2018-2020 Jeep Wrangler JL and Gladiator JT W/O Tune |
| Description_SHP |
None |
| Description_MKT |
The industry's most reliable forced induction system is now available for the 2018-2020 Jeep Wrangler JL and Gladiator JT with the 3.6L Pentastar V6 engine. The Edelbrock Supercharger #152840 W/O Tuner is engineered to deliver a 46% increase in rear-wheel horsepower with 26.9% more rear-wheel torque in a 50-state emissions-legal bolt-on kit that fits under the factory hood with no modification. This kit features the latest TVS R1320 rotor assembly in an Edelbrock supercharger housing mated to a lower manifold with a high-capacity dual-pass intercooler. An integrated bypass valve helps to eliminate parasitic power loss under light throttle while helping to improve mileage potential under normal driving conditions. This kit comes with all necessary hardware, hoses and full-color installation manual to simplify the installation. The hand-held tuner is not included with kit #152840. Order #15284 for the Supercharger Kit with tuner. Edelbrock Superchargers for 2018-20 Jeep JL/JT are manufactured by Edelbrock in the USA and include a free 3-Year/36,000-mile powertrain warranty. Not compatible with eTorque Hybrid models. |
| Fuel Injector Type |
42 |
| RGL |
WARNING: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov. |
| Vehicle Model |
Wrangler |
| Calibration |
No |
| Harmonic Balancer Diameter |
6.1 |
| Finish |
Black Powder Coated |
| Air Filter Included |
Yes |
| Quantity |
Kit |
| Pulley Belt Width |
6-Rib |
| Outside Pulley Diameter |
2.625 |
| Hose Included |
Yes |
| E.O. |
D-215-118 |
| Rotor Type |
Eaton TVS 1320 |
| System Type |
Stage 1 - Street System |
| Length |
18.0000 |
| Width |
26.0000 |
| Height |
33.0000 |
| Weight |
91.0000 |
