| Description_ASM |
Fits Chevrolet GEN 1 Small Blocks including the 262, 265, 267, 283, 302, 305, 307, 327, 350 and 400. Does not fit LT1/LT4, or factory roller Small Blocks built from 1985 and newer. GM gradually added roller camshafts to 305's and 350's from the mid 80's forward. Camaros/Firebirds/Corvettes received the roller cams early, but many trucks and SUV's had flat tappet cams until the mid 90's. Remove the intake or timing cover to confirm whether the block is a factory roller or flat tappet. Does not fit the LS1, LS2, LS3 or any LS-based 4.8, 5.3, 5.7, 6.0 and 6.2. 1955-1957 Chevrolet 265 engines require a groove on the 5th cam journal for oiling. Contact us for more information. |
| Description_DEF |
Engine Camshaft |
| Description_DES |
Tight Lash 259/262 Solid Flat Cam for Chevrolet Small Block |
| Description_INV |
Tight Lash 259/262 Solid Flat Cam SBC |
| Description_EXT |
Good for 350-377 on 3/8-1/2 mile tracks with fast corners. Best with open rules. |
| Description_SHO |
288BTL-6 |
| Description_KEY |
265, 283, 307, 302, 305, 327, 350, 383, 400, 427, L46, L48, L65, LM1, LT-1, L82, L81, LS9, L83, L98, L05, LG3, LG4, LT1, LT4, Camaro, Corvette, Chevelle, Stingray, Silverado, C10, Firebird, Chevrolet, Chevy, Small Block Chevy, Caprice, Malibu, Impala, Nova, 355, GEN1, Monte Carlo, S10 |
| Description_SHP |
None |
| Advertised Exhaust Duration |
292 |
| Cam Type |
Solid Flat Tappet |
| Amazon ASIN |
B000V9GBV2 |
| Grind Number |
288BTL-6 |
| Intake Duration at .050 Inch Lift |
259 |
| Camshaft Gear Attachment |
3-Bolt |
| Exhaust Duration at .050 inch Lift |
262 |
| C.A.R.B. Exempt for On-Road Vehicles? |
No |
| C.A.R.B. Exempt for Racing and Off-Road Only Vehicles? |
Yes, but must be a race/competition only vehicle. |
| C.A.R.B. Exempt for Federally Certified Vehicles Manufactured Before 1967? |
Yes, but must meet tailpipe emission standards for year of vehicle. |
| C.A.R.B. Exempt for Foreign Vehicles Manufactured Before 1967? |
Yes, but must meet tailpipe emission standards for year of vehicle. |
| C.A.R.B. Exemption Reason |
N/A |
| Valve Springs Required |
Yes |
| C.A.R.B. E.O. Number |
N/A |
| Intake Valve Lift |
0.55 |
| Basic Operating RPM Range |
3400-7,000 |
| Lifter Type |
Solid Flat Tappet |
| Lobe Separation |
106 |
| Assembly Lubricant Included |
Yes |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm P65Warnings.ca.gov |
| Usage |
Strip |
| Advertised Intake Duration |
288 |
| Engine Family |
Chevrolet 262-400 c.i. 8 Cylinder (1958-1998) |
| C.A.R.B. Exempt for California Certified Vehicles Manufactured Before 1965? |
Yes, but must meet tailpipe emission standards for year of vehicle. |
| Title |
Tight Lash 259/262 Solid Flat Cam for Chevrolet Small Block |
| Camshaft Material |
Cast Iron |
| Lifters Included |
No |
| Camshaft Series |
Tight Lash |
| Exhaust Valve Lift |
0.56 |
| Length |
3.0000 |
| Width |
3.0000 |
| Height |
25.0000 |
| Weight |
9.0000 |
