| Description_ASM |
Fits Chevrolet GEN 1 Small Blocks including the 262, 265, 267, 283, 302, 305, 307, 327, 350 and 400. Does not fit LT1/LT4, or factory roller Small Blocks built from 1985 and newer. GM gradually added roller camshafts to 305's and 350's from the mid 80's forward. Camaros/Firebirds/Corvettes received the roller cams early, but many trucks and SUV's had flat tappet cams until the mid 90's. Remove the intake or timing cover to confirm whether the block is a factory roller or flat tappet. Does not fit the LS1, LS2, LS3 or any LS-based 4.8, 5.3, 5.7, 6.0 and 6.2. 1955-1957 Chevrolet 265 engines require a groove on the 5th cam journal for oiling. Contact us for more information. |
| Description_DEF |
Engine Camshaft |
| Description_DES |
Xtreme Energy 218/224 Hydraulic Flat Cam for Chevrolet Small Block |
| Description_KEY |
265, 283, 307, 302, 305, 327, 350, 383, 400, 427, L46, L48, L65, LM1, LT-1, L82, L81, LS9, L83, L98, L05, LG3, LG4, LT1, LT4, Camaro, Corvette, Chevelle, Stingray, Silverado, C10, Firebird, Chevrolet, Chevy, Small Block Chevy, Caprice, Malibu, Impala, Nova, 355, GEN1, Monte Carlo, S10 |
| Description_EXT |
Excellent response, good mid-range, noticeable idle. |
| Description_INV |
XE 218/224 Hyd Flat Cam SBC |
| Description_SHO |
XE 218/224 HFT SBC |
| Description_SHP |
None |
| Exhaust Duration at .050 inch Lift |
224 |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm P65Warnings.ca.gov |
| Amazon ASIN |
B000CIS6B0 |
| C.A.R.B. Exempt for California Certified Vehicles Manufactured Before 1965? |
Yes, but must meet tailpipe emission standards for year of vehicle. |
| C.A.R.B. E.O. Number |
N/A |
| C.A.R.B. Exempt for Federally Certified Vehicles Manufactured Before 1967? |
Yes, but must meet tailpipe emission standards for year of vehicle. |
| Camshaft Gear Attachment |
3-Bolt |
| Exhaust Valve Lift |
0.469 |
| Lifters Included |
No |
| C.A.R.B. Exempt for Racing and Off-Road Only Vehicles? |
Yes, but must be a race/competition only vehicle. |
| Cam Type |
Hydraulic Flat Tappet |
| C.A.R.B. Exemption Reason |
N/A |
| C.A.R.B. Exempt for Foreign Vehicles Manufactured Before 1967? |
Yes, but must meet tailpipe emission standards for year of vehicle. |
| Lifter Type |
Hydraulic Flat Tappet |
| Intake Valve Lift |
0.462 |
| Cam and Lifter Kit Upgrade |
CL12-238-2 |
| Engine Family |
Chevrolet 262-400 c.i. 8 Cylinder (1958-1998) |
| Basic Operating RPM Range |
1,300-5,600 |
| Camshaft Series |
Xtreme Energy |
| SK-Kit Upgrade |
SK12-238-2 |
| Camshaft Material |
Cast Iron |
| Advertised Intake Duration |
262 |
| Intake Duration at .050 Inch Lift |
218 |
| Advertised Exhaust Duration |
270 |
| Assembly Lubricant Included |
Yes |
| C.A.R.B. Exempt for On-Road Vehicles? |
No |
| K-Kit Upgrade |
K12-238-2 |
| Usage |
Street/Performance |
| Valve Springs Required |
Yes |
| Title |
Xtreme Energy 218/224 Hydraulic Flat Cam for Chevrolet Small Block |
| Grind Number |
XE262H |
| Lobe Separation |
110 |
| Length |
3.0000 |
| Width |
3.0000 |
| Height |
24.0000 |
| Weight |
9.0000 |
