| Description_ASM |
Fits Chevrolet GEN 1 Small Blocks including the 262, 265, 267, 283, 302, 305, 307, 327, 350 and 400. Does not fit LT1/LT4, or factory roller Small Blocks built from 1985 and newer. GM gradually added roller camshafts to 305's and 350's from the mid 80's forward. Camaros/Firebirds/Corvettes received the roller cams early, but many trucks and SUV's had flat tappet cams until the mid 90's. Remove the intake or timing cover to confirm whether the block is a factory roller or flat tappet. Does not fit the LS1, LS2, LS3 or any LS-based 4.8, 5.3, 5.7, 6.0 and 6.2. 1955-1957 Chevrolet 265 engines require a groove on the 5th cam journal for oiling. Contact us for more information. |
| Description_DEF |
Engine Camshaft |
| Description_DES |
Xtreme Energy 212/218 Hydraulic Flat Cam for Chevrolet Small Block |
| Description_INV |
XE 212/218 Hyd Flat Cam SBC |
| Description_EXT |
Strong torque thru low end and mid-range, good idle. |
| Description_KEY |
265, 283, 307, 302, 305, 327, 350, 383, 400, 427, L46, L48, L65, LM1, LT-1, L82, L81, LS9, L83, L98, L05, LG3, LG4, LT1, LT4, Camaro, Corvette, Chevelle, Stingray, Silverado, C10, Firebird, Chevrolet, Chevy, Small Block Chevy, Caprice, Malibu, Impala, Nova, 355, GEN1, Monte Carlo, S10 |
| Description_SHP |
None |
| Description_SHO |
XE 212/218 HFT SBC |
| Lifters Included |
No |
| C.A.R.B. Exempt for Federally Certified Vehicles Manufactured Before 1967? |
Yes, but must meet tailpipe emission standards for year of vehicle. |
| C.A.R.B. E.O. Number |
N/A |
| Exhaust Duration at .050 inch Lift |
218 |
| Cam Type |
Hydraulic Flat Tappet |
| Camshaft Gear Attachment |
3-Bolt |
| Amazon ASIN |
B000CIQ7AM |
| Valve Springs Required |
Yes |
| Intake Valve Lift |
0.447 |
| C.A.R.B. Exemption Reason |
N/A |
| C.A.R.B. Exempt for Foreign Vehicles Manufactured Before 1967? |
Yes, but must meet tailpipe emission standards for year of vehicle. |
| Lifter Type |
Hydraulic Flat Tappet |
| Basic Operating RPM Range |
1,000-5,200 |
| C.A.R.B. Exempt for Racing and Off-Road Only Vehicles? |
Yes, but must be a race/competition only vehicle. |
| Camshaft Series |
Xtreme Energy |
| SK-Kit Upgrade |
SK12-234-2 |
| Advertised Intake Duration |
256 |
| Grind Number |
XE256H |
| Exhaust Valve Lift |
0.454 |
| Usage |
Street/Performance |
| Advertised Exhaust Duration |
268 |
| Camshaft Material |
Cast Iron |
| Lobe Separation |
110 |
| Intake Duration at .050 Inch Lift |
212 |
| Engine Family |
Chevrolet 262-400 c.i. 8 Cylinder (1958-1998) |
| Title |
Xtreme Energy 212/218 Hydraulic Flat Cam for Chevrolet Small Block |
| C.A.R.B. Exempt for On-Road Vehicles? |
No |
| C.A.R.B. Exempt for California Certified Vehicles Manufactured Before 1965? |
Yes, but must meet tailpipe emission standards for year of vehicle. |
| Assembly Lubricant Included |
Yes |
| K-Kit Upgrade |
K12-234-2 |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm P65Warnings.ca.gov |
| Cam and Lifter Kit Upgrade |
CL12-234-2 |
| Length |
2.0000 |
| Width |
3.0000 |
| Height |
24.0000 |
| Weight |
9.0000 |
