Description_ABR |
MDA |
Description_APS |
1997 thru 2015 Chevrolet Camaro and Corvette 8 Cylinders |
Description_ASM |
1997 thru 2015 Chevrolet Camaro and Corvette 8 Cylinders |
Description_DEF |
Transmission Clutch and Flywheel Kit |
Description_DES |
TRIAD(R) XDS, Clutch and Flywheel Kit |
Description_LAB |
P.Plate, Discs, Floaters, Flywh, P.P.Bolts, A.Tool, Pilot Brgs |
Description_INV |
Centerforce, Full Kits W/Flywheel |
Description_FAB |
8.750" Diameter; |
Description_EXT |
The Centerforce(R) TRIAD XDS (eXtreme Drive System) 8.75 Inch patented multi-disc clutch offers a smaller and lighter system for quick revving vehicles with engine torque levels from 500 to 1200 ft/lbs. |
Description_SLA |
Clutch and Flywheel Kit, TRIAD, 8.750-IN/222.3-MM, 1-1/8-IN - 26 Spl., Solid; Full face Sintered Metallic Disc, 1100 Ft/Lbs Trq. Cap. |
Description_SLD |
TRIAD, 8.750-IN, 1.125-IN - 26 Spl., 1100 Ft/Lbs |
Description_MKT |
The Centerforce(R) TRIAD XDS 8.75" triple disc clutch has been developed for vehicles requiring a holding capacity of 500 to 1200 ft/lbs of torque at the crank. The billet pressure plate features our patented centrifugal weight system (where applicable) for superior clamp load over stock and our patented ball bearing actuated pressure plate (where applicable) providing light pedal effort. The solid hub (possible gear noise) disc pack is equipped with Kevlar full facing friction material providing increased holding capacity. TRIAD XDS clutches are equipped with a lightened billet steel flywheel providing low inertia resulting in quicker RPM's. Due to the aggressive nature of this race inspired clutch, vehicles may experience some floater noise and/or chatter during operation. Components are designed, machined and assembled in the USA. TRIAD XDS clutches are match balanced and ready for installation using the included ARP fasteners. |
Description_SHO |
Full Kits W/Flywheel |
Counterweight Assist |
No |
Disc Type |
Full face |
Input Shaft Diameter |
1.125 |
Disc Material |
Sintered Metallic |
Installed Height |
2.890 |
Mounting Hardware Included |
Yes |
Torque Capacity |
1100 |
Alignment Tool Included |
Yes |
California Proposition 65 |
WARNING - Includes Nickel - cancer. www.P65Warnings.ca.gov. |
Disc Type Sprung Solid |
Solid |
Input Spline Quantity |
26 |
Pilot Bushing Included |
Yes |
Clutch Disc Diameter |
8.750 |
Clutch Disc Diameter |
222.3 |
Crankshaft Bolt Hole Quantity |
6 |
Flywheel Counter Balance Weight |
0 |
Flywheel Crank Bolt Size |
MM11 x 1.50 x 23 |
Flywheel Crank Flange Register |
2.068 |
Material |
Billet Steel Flywheel / Nodular Iron Pressure Plate / Full Face Cerametallic Friction |
Out of Package Weight |
34.30 |
Ring Gear O.D. |
14.105 |
Title |
PN: 838264042 - TRIAD XDS, Clutch and Flywheel Kit |
Tooth Quantity |
168 |
Made In The USA |
Assembled |
Length |
5.5000 |
Width |
18.0000 |
Height |
18.0000 |
Weight |
38.4500 |