HI-RAM SERIES: These tunnel ram manifolds are used primarily in drag racing, tractor/truck pulls and performance marine applications where high RPM performance is required. The effective RPM range is between 2,800 to 8,000 RPM. The WEIAND Hi-Ram, with it's patented D-shaped port runners and large plenum chamber, provides optimum velocity of the air/fuel mixture to the cylinder head intake ports. For maximum performance in a naturally aspirated competition application, the WEIAND Hi-Ram is the manifold of choice! This manifold is part of the Weiand Nostalgia Series of intake manifolds. Weiand Nostalgia Series intake manifolds are made using the original tooling, and may have minor appearance imperfections that do not affect the functionality of the part. These minor blemishes are a natural part of the casting process when using the original sand casting tooling. Weiand Nostalgia series intakes are proudly cast and machined in the USA. We support all areas of the vintage, show, and nostalgia car hobby, and want to continue to produce these lower volume manifolds using the original tools. There is no need to search for that vintage intake at swap meets or on the internet when you can buy the real deal new from Weiand! *** Use Side-by-Side 2 x 4 Tunnel Ram Carburetor Linkage Kit # 4023. When using carburetors with vacuum operated secondary's, use Diaphragm Housing Covers # 20-28, for more even and balanced secondary operation. Minor modifications to the linkage kit may be necessary with this intake manifold.
Specifications:
| Description_ASC |
Use Side-by-Side 2 x 4 Tunnel Ram Carburetor Linkage Kit # 4023. When using carburetors with vaccum operated secondaries, use Diaphragm Housing Covers # 20-28, for more even and balanced secondary operation. Minor modifications to the linkage kit may be necessary with this intake manifold. |
| Description_DEF |
Engine Intake Manifold |
| Description_DES |
Weiand Hi-Ram Intake - Chrysler Small Block V8 |
| Description_EXT |
Nostalgic Series Hi-Ram Intake Manifold; Upper; Power Band 2800-8000 RPM; Square Flange Carb Mounting; 8.93 in. Front/9.37 in. Rear Height; Satin Finish; |
| Description_FAB |
2 x 4 carburetor top |
| Description_FAB |
Square flange carburetor mounting |
| Description_FAB |
2800-8000 RPM power band |
| Description_FAB |
Special D-shaped port runner design |
| Description_FAB |
Large volume plenum |
| Description_FAB |
Power band: 2800-8000 RPM |
| Description_FAB |
Height: Front 8.93", Rear 9.37" |
| Description_FAB |
Port Size: 2.08" height 1.08" width |
| Description_FAB |
Carb Flange Center-To Center 9" |
| Description_FAB |
Weiand Nostalgia Series Intake Manifold |
| Description_MKT |
HI-RAM SERIES: These tunnel ram manifolds are used primarily in drag racing, tractor/truck pulls and performance marine applications where high RPM performance is required. The effective RPM range is between 2,800 to 8,000 RPM. The WEIAND Hi-Ram, with it's patented D-shaped port runners and large plenum chamber, provides optimum velocity of the air/fuel mixture to the cylinder head intake ports. For maximum performance in a naturally aspirated competition application, the WEIAND Hi-Ram is the manifold of choice! This manifold is part of the Weiand Nostalgia Series of intake manifolds. Weiand Nostalgia Series intake manifolds are made using the original tooling, and may have minor appearance imperfections that do not affect the functionality of the part. These minor blemishes are a natural part of the casting process when using the original sand casting tooling. Weiand Nostalgia series intakes are proudly cast and machined in the USA. We support all areas of the vintage, show, and nostalgia car hobby, and want to continue to produce these lower volume manifolds using the original tools. There is no need to search for that vintage intake at swap meets or on the internet when you can buy the real deal new from Weiand! *** Use Side-by-Side 2 x 4 Tunnel Ram Carburetor Linkage Kit # 4023. When using carburetors with vacuum operated secondary's, use Diaphragm Housing Covers # 20-28, for more even and balanced secondary operation. Minor modifications to the linkage kit may be necessary with this intake manifold. |
| Description_INV |
INTAKE,318(FROM '67)340,360 V8 |
| Description_SHO |
Intake Manifold |
| Engine Make/Size |
Chrysler Small Block V8 |
| Front Height |
8.930 in. |
| WARNING CA Proposition 65 |
No |
| Product Type |
Intake Manifold |
| Cylinder Head Type |
Standard |
| Number of Carbs |
One |
| Brand |
Weiand |
| Engine |
Chrysler Small Block V8 |
| Construction |
Cast |
| Emission |
Without EGR |
| Finish |
Satin |
| Fuel System Type |
Carb |
| Manifold Type |
Hi-Ram |
| Position |
Upper |
| Rear Height |
9.370 in. |
| RPM Range |
2800-8000 |
| Usage |
Racing |
| Emission Code |
3 |
| RPM Power Band |
2800-8000 |
| Warranty |
Limited 90 Day |
| Color |
Natural |
| Length |
2.0000 |
| Width |
3.0000 |
| Height |
34.0000 |
| Weight |
1.0000 |
