Tuning your Mishimoto 50mm Blow Off Valve to your vehicle is essential for its proper operation. Too small of a spring and the valve will open at idle and low boost, letting precious power escape to the atmosphere. Too big of a spring, and the valve won't open when it's needed. Luckily, Mishimoto offers three setup springs to tailor your blow off valve to your vehicle. We offer these springs for idle vacuums reading 7.25-10.9 PSI (black spring), 5.07-2.25 PSI (blue), or 0-5.07 PSI (white). The blue spring is included with all Mishimoto 50mm Blow Off Valves but is included in this set, in case you need to replace it due to wear or if it decides to make a great escape across the shop next time you disassemble your valve. Of course, like all Mishimoto products, this blow off valve setup spring set is covered by our Mishimoto Lifetime Warranty.
Specifications:
| Description_DEF |
Turbocharger Blow Off Valve Spring |
| Description_DES |
Mishimoto Blow Off Valve Setup Spring, White (0.00-5.07 PSI) |
| Description_MKT |
Tuning your Mishimoto 50mm Blow Off Valve to your vehicle is essential for its proper operation. Too small of a spring and the valve will open at idle and low boost, letting precious power escape to the atmosphere. Too big of a spring, and the valve won't open when it's needed. Luckily, Mishimoto offers three setup springs to tailor your blow off valve to your vehicle. We offer these springs for idle vacuums reading 7.25-10.9 PSI (black spring), 5.07-2.25 PSI (blue), or 0-5.07 PSI (white). The blue spring is included with all Mishimoto 50mm Blow Off Valves but is included in this set, in case you need to replace it due to wear or if it decides to make a great escape across the shop next time you disassemble your valve. Of course, like all Mishimoto products, this blow off valve setup spring set is covered by our Mishimoto Lifetime Warranty. |
| Description_EXT |
Mishimoto Blow Off Valve Setup Springs |
| Description_INV |
Mishimoto MMBV-SPR-WH |
| Description_FAB |
Used to set pre-load on Mishimoto 50mm blow off valve |
| Description_FAB |
Available for vehicles with idle vacuum from 0-10.9 PSI |
| Description_FAB |
Keeps valve closed while at idle |
| Description_FAB |
Essential for proper blow off valve operation |
| Description_FAB |
Mishimoto Lifetime Warranty |
| Description_SHO |
BOV Spring |
| TechSpec Material |
N/A |
| SellingPoint02 |
Available for vehicles with idle vacuum from 0-10.9 PSI |
| SellingPoint14 |
N/A |
| TechSpec Note |
Black Setup Spring (7.25-10.9 )----Blue Setup Spring (5.07-7.25 )----White Setup Spring (0.00-5.07 )-- |
| SellingPoint01 |
Used to set pre-load on Mishimoto 50mm blow off valve |
| SellingPoint05 |
Mishimoto Lifetime Warranty |
| SellingPoint11 |
N/A |
| TechSpec Length (Inches) |
N/A |
| Install Difficulty |
3 |
| OptionLabel |
White (0.00-5.07 PSI) |
| SellingPoint07 |
N/A |
| SellingPoint08 |
N/A |
| SellingPoint12 |
N/A |
| SellingPoint15 |
N/A |
| TechSpec Diameter (Inches) |
N/A |
| TechSpec Engine Codes |
N/A |
| TechSpec Includes |
(1) Mishimoto 50mm Blow-Off Valve Setup Spring--Mishimoto Lifetime Warranty |
| TechSpec Installation Notes |
N/A |
| Color |
White |
| SellingPoint03 |
Keeps valve closed while at idle |
| SellingPoint04 |
Essential for proper blow off valve operation |
| SellingPoint06 |
N/A |
| SellingPoint09 |
N/A |
| SellingPoint10 |
N/A |
| SellingPoint13 |
N/A |
| TechSpec Applications |
N/A |
| TechSpec Maximum Pressure (PSI) |
N/A |
| TechSpec Maximum Temperature (F) |
N/A |
| TechSpec Minimum Yield Strength |
N/A |
| TechSpec Overall Height (Inches) |
N/A |
| TechSpec Thread Size |
N/A |
| TechSpec Ultimate Tensile Strength |
N/A |
| TechSpec Weight (Ounces) |
N/A |
| Length |
2.5000 |
| Width |
1.5000 |
| Height |
1.5000 |
| Weight |
1.0000 |
