| Description_DEF |
Engine Cold Air Intake |
| Description_DES |
EVOLUTION Cold Air Intake System |
| Description_INV |
Injen Evolution Intake |
| Description_FAB |
Dyno Proven gains of up to 23 hp and 21 lb.-ft. of torque |
| Description_FAB |
Massive intake tube that tapers down from 5in OD to increase airflow velocity at the turbo inlet |
| Description_FAB |
Large forward-facing inlet to maximize incoming cool air from behind the grille |
| Description_FAB |
Intake tube features Injen's patented internal MegaRam (MR) Technology |
| Description_FAB |
No Tune Required - Designed to work seamless with the stock calibration |
| Description_FAB |
Aggressive under hood appearance while maintaining an OE fit |
| Description_FAB |
Utilizes our patented Twist-Lock Filter attachment system |
| Description_FAB |
Durable XLPE Roto-Molded Polyethylene tube and housing |
| Description_FAB |
Reinforced automotive grade silicone couplers |
| Description_FAB |
Fully serviceable Injen SuperNano-Web dry air filter |
| Description_FAB |
Replacement air filter # X-1107-BB |
| Description_FAB |
Stainless steel band clamps with inner protective liner |
| Description_FAB |
Aggressive under hood appearance while maintaining an OE fit |
| Description_FAB |
Our clear inspection badge allows you to quickly check the condition of your air filter while the red stripe enhances under hood appearances. |
| Description_FAB |
Made in Pomona California, USA |
| Description_FAB |
Injen Technology Limited Lifetime Warranty |
| Description_FAB |
Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles. |
| Description_EXT |
EVOLUTION Cold Air Intake System, Part No. EVO9205, 2015-2023 Ford Mustang L4-2.3L Turbo |
| Description_SHO |
Evolution Intake |
| Description_MKT |
The all-new EVO9205 Evolution cold air intake system by Injen Technology is the next generation of performance intake systems for the 2015-2023 Ford Mustang with the 2.3L EcoBoost engine. Every EVO9205 cold air intake is made in the USA from cross linked high density polyethylene for extreme durability. The box has a forward facing ram air scoop to provide fresh, clean air to your engine. This intake system also includes stainless steel hardware and automotive grade urethane couplers. No cutting or drilling is required for an easy installation process that does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS. |
| Description_MKT |
The EVO9205 was precisely tuned and tested on our in-house dyno to replicate stock fueling while increasing horsepower and torque. The EVO9205 system features our patent-pending twist-lock system that eases the installation process and securely mounts a massive SuperNano-Web dry air filter. |
| Description_MKT |
When it comes to durability, Injen's Evolution series can't be beat! Some of our competitors use an inferior HDPE linear polyethylene to mold their intake systems. HDPE is cheap for manufacturing but doesn't come close to the strength and durability of XLPE polyethylene. Injen strictly uses the superior XLPE crosslinked polyethylene and has 20 times the environmental stress crack resistance of HDPE, 10 times the molecular weight of HDPE, and 5 times the impact and tensile strength of HDPE. In other words, Injen's Evolution intake systems are built tough and designed to outlast the competition! |
| Description_MKT |
XLPE Roto-molded Housing: The one-piece sealed housing on the EVO9205 utilizes the all-new Injen Twist-Lock System to securely attach the SuperNano-Web Dry air filter in place. The Twist-Lock system eliminates the use of unnecessary parts and gives you one of the simplest installations available. The EVO9205 housing also includes our Injen Clear-View badge for a cleaner, more aggressive under hood appearance. |
| Description_MKT |
Designed in 3D ensures a hassle free, drop-in installation, this intake system attaches directly to the original factory airbox. Forward facing ram air scoop to provide cool, fresh air to your hungry turbo! |
| Description_MKT |
XLPE Durable Rotomolded intake tube: The EVO9205 Evolution Cold Air Intake System uses a custom designed and dyno-tuned intake tube to produce huge power gains while retaining an OE quality fit. This tube utilizes our patented MR Technology for accurate fuel trims for safe power improvements and no check engine lights. |
| Description_MKT |
SuperNano-Web Dry Air Filter: 'That's massive!' is all you will hear about this SuperNano-Web Dry air filter that is included with the EVO9205 cold air intake system. Using the largest filter possible for this application has increased the available air volume, resulting in added power while keeping the installation process quick and simple. |
| Description_MKT |
Quality Hardware: From the Stainless Steel Band Clamps with an inner protective liner to the reinforced automotive grade silicone coupler, every aspect is covered for a perfect and secure fit. |
| Description_MKT |
Hassle-Free Installation: Make it easy! By designing this kit in a 3D workspace, you're ensured a quick and easy installation that not only increases the power output of your engine, but also provides a clean and powerful look that others see every time you pop your hood. |
| Description_MKT |
Dyno Proven: Clean and simple, NUMBERS talk! Injen has put in the time and diligence to stand behind our performance data. We put in the time to test and prove that we have developed a superior kit for your Ford Mustang Ecoboost. After hours of designing and dyno testing, Injen is proud to say that the EVO9205 Evolution Air Intake system puts down numbers of up to 23 additional horsepower and 21 Ft.-lbs. of torque. |
| Black Hydroshield (Optional) |
N/A |
| Compatible Throttle Controller |
PT0013B |
| Filter Color |
Blue |
| Filter Media |
SuperNano-Web Dry |
| Grade Type |
Performance |
| Heat Shield Included |
No |
| HP Gain |
23 |
| Intake Color |
Black |
| Mounting Hardware Included |
Yes |
| Prop 65 - Short Label |
prop65_warning.jpg |
| Prop 65 (C, R or CR) |
CR |
| Prop 65 Yes/No |
Yes |
| Red Hydroshield (Optional) |
N/A |
| Replacement Filter Part Number |
X-1107-BB |
| Title |
Injen EVOLUTION Cold Air Intake System |
| TQ Gain |
21 |
| Tube Material |
Rotomolded XLPE |
| Universal or Specific Fit |
Specific |
| Length |
13.0000 |
| Width |
17.0000 |
| Height |
34.0000 |
| Weight |
14.0000 |
