| Description_ASC |
2013-2014 Models with 8th digit VIN #8 or #L Dual MAF Sensors |
| Description_DEF |
Engine Cold Air Intake |
| Description_DES |
EVOLUTION Cold Air Intake System |
| Description_EXT |
EVOLUTION Cold Air Intake System, Part No. EVO7013, 2013-2014 GM Diesel Truck V8-6.6L(td) Duramax LML. |
| Description_INV |
Injen Evolution Intake |
| Description_MKT |
The Evolution of cold air intakes is here. The Evolution cold air intake system by Injen Technology is the next generation of performance intake systems. The EVO7013 is specifically engineered for the 2013-2014 GM Diesel trucks with the 6.6L LML Duramax engine. Every EVO7013 cold air intake is made in the USA from cross linked high density polyethylene for extreme durability. They include stainless steel hardware and automotive grade urethane couplers. No cutting or drilling required for an easy installation process that does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS. , , The EVO7013 was precisely tuned and tested on our in-house dyno to replicate stock fueling while increasing horsepower and torque. The EVO7013 system features our 2-piece box design that incorporates our boost plenum, a massive 360? SuperNano-Web dry air filter, built-in Filter Monitor for quick and easy filter inspections, a smooth Rotomolded induction tube for reduced restriction levels, and premium hardware. Every Injen Evolution air induction system utilizes Injen's proprietary SuperNano-Web dry air filters. The Evolution induction systems utilize some of the largest filters on the market employing super deep filter pleats, with some measuring over 1.25"deep! This particular intake kit also features our SHUR-LOCK mounting system on the air filter to ensure a non-slip seal. The EVO7013 cold air intake system was designed to use the maximum space available under the hood to ensure optimum breathing room and extreme performance. The Evolution can't be stopped?.. Roto-molded Housing and Boost Plenum; The EVO7013 system features our 2-piece box design that incorporates our boost plenum. Designed 100% in 3D ensures a hassle free, drop-in installation. Roto-molded Intake Tube; The EVO7013 Evolution Cold Air Intake System uses a custom designed and dyno-tuned intake tube to produce huge power gains while retaining an OE quality fit. , , |
| Description_MKT |
SuperNano-Web Dry Air Filter; "That's massive!"is all you will hear about this SuperNano-Web Dry air filter that is included with the EVO7013 cold air intake system. Using the largest filter possible for this application has increased the available air volume - resulting in added power while keeping the installation process quick and simple. , , Quality Hardware; From the Stainless Steel Band Clamps with an inner protective liner to the reinforced automotive grade silicone coupler, every aspect is covered for a perfect and secure fit. , , Hassle-Free Installation; Make it easy! By designing this kit in a 3D workspace, you're ensured a quick and easy installation that not only increases the power output of your engine, but also provides a clean and powerful look that others see every time you pop your hood. Dyno Proven; Clean and simple, NUMBERS talk! Injen has put in the time and diligence to stand behind our performance data. We put in the time to test and prove that we have developed a superior kit for your GM Duramax LML. After hours of designing and dyno testing, Injen is proud to say that the EVO7013 Evolution Air Intake system puts down numbers of up to 30 additional horsepower and 80 Ft.-lbs. of torque. |
| Description_SHO |
Evolution Intake |
| Description_FAB |
Designed for vehicles with dual MAF sensors |
| Description_FAB |
Dyno Proven gains of up to 30 hp and 80 lb-ft. of torque |
| Description_FAB |
Designed to work with the stock calibration |
| Description_FAB |
Aggressive intake growl under acceleration |
| Description_FAB |
Durable Roto-Molded XLPE Polyethylene housing and intake tube |
| Description_FAB |
Reinforced automotive grade silicone couplers |
| Description_FAB |
Fully serviceable Injen SuperNano-Web dry air filter |
| Description_FAB |
Replacement air filter part number X-1101-BB |
| Description_FAB |
Optional hydroshield part number 1074BLK |
| Description_FAB |
Stainless steel band clamps with inner protective liner |
| Description_FAB |
Aggressive underHood appearance while maintaining an OE fit |
| Description_FAB |
Made in Pomona, California USA |
| Description_FAB |
Injen Technology Limited Lifetime Warranty |
| Description_FAB |
This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles. |
| Heat Shield Included |
No |
| Replacement Filter Part Number |
X-1101-BB |
| TQ Gain |
80 |
| HP Gain |
35 |
| Intake Color |
Black |
| Mounting Hardware Included |
Yes |
| Prop 65 - Short Label |
prop65_warning.jpg |
| Prop 65 (C, R or CR) |
CR |
| Tube Material |
Rotomolded XLPE |
| Black Hydroshield (Optional) |
1074BLK |
| Filter Color |
Blue |
| Patented MR Technology Incorporated |
Yes |
| Prop 65 Yes/No |
Yes |
| Red Hydroshield (Optional) |
N/A |
| Title |
Injen EVOLUTION Cold Air Intake System |
| Universal or Specific Fit |
Specific |
| Filter Media |
SuperNano-Web Dry |
| Grade Type |
Performance |
| Length |
13.0000 |
| Width |
17.0000 |
| Height |
24.0000 |
| Weight |
14.0000 |
