| Description_ASC |
Does not fit on vehicles equipped with a MAF Sensor |
| Description_DEF |
Engine Cold Air Intake |
| Description_DES |
EVOLUTION Cold Air Intake System |
| Description_EXT |
EVOLUTION Cold Air Intake System, Part No. EVO3003, VW & Audi 1.8L / 2.0L Gen 3 Engines , VW MK7 & Audi 8V. |
| Description_SHO |
Evolution Intake |
| Description_FAB |
Does not fit on vehicles equipped with a MAF sensor |
| Description_FAB |
Dyno Proven gains of up to 19 hp and 24 lb-ft. of torque |
| Description_FAB |
Designed to work with the stock calibration |
| Description_FAB |
Aggressive intake growl under acceleration |
| Description_FAB |
Durable Roto-Molded XLPE Polyethylene housing and intake tube |
| Description_FAB |
Intake scoop is designed to capture the largest amount of cool air |
| Description_FAB |
Reinforced automotive grade silicone couplers |
| Description_FAB |
Fully serviceable Injen SuperNano-Web dry air filter |
| Description_FAB |
Replacement air filter part number X-1128-BB |
| Description_FAB |
Stainless steel band clamps with inner protective liner |
| Description_FAB |
Aggressive underHood appearance while maintaining an OE fit |
| Description_FAB |
Made in Pomona, California USA |
| Description_FAB |
Injen Technology Limited Lifetime Warranty |
| Description_FAB |
This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles. |
| Description_MKT |
Give your MK7 Audi/Volkswagen that added punch you crave with the EVO3003 Evolution Cold Air Intake System by Injen Technology. The EVO3003 is specifically engineered for the Audi/Volkswagen MK7 with the 1.8L/2.0L engine and features a fully integrated and functional front ram air system with dual inlets. Unlike the factory scoop that some "performance" companies retain, the Injen EVO3003 has a redesigned ram air section that utilizes booth inlets for maximum airflow. Every EVO3003 cold air intake is made in the USA from cross linked high density polyethylene for extreme durability. No cutting or drilling required for an easy installation process that does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS right out of the box! |
| Description_MKT |
The EVO3003 Cold Air Intake system features our 2-piece box design that incorporates our boost plenum, our fully integrated ram air scoop with functioning dual inlets, and a massive 360 degree SuperNano-Web dry air filter. Every Injen Evolution air induction system utilizes Injen's proprietary SuperNano-Web dry air filters. Don't just take our word for it, every intake system that Injen Technology produces is dyno tested in-house and those results are published for anyone to see. |
| Description_MKT |
Roto-molded Housing w/ integrated Ram Air Scoop: The EVO3003 system features our 2-piece box design that incorporates our boost plenum. The box is molded into our fully functional ram air scoop with dual front inlets to capture the maximum amount of cool air to feed that hungry turbo. |
| Description_MKT |
Roto-molded Intake Tube: The EVO3003 Evolution Cold Air Intake System uses a custom designed and dyno-tuned intake tube to produce huge power gains while retaining an OE quality fit. |
| Description_MKT |
SuperNano-Web Dry Air Filter: 'That's massive!' is all you will hear about this SuperNano-Web Dry air filter that is included with the EVO3003 cold air intake system. Using the largest filter possible for this application has increased the available air volume, resulting in added power while keeping the installation process quick and simple. |
| Description_MKT |
Quality Hardware: From the Stainless Steel Band Clamps with an inner protective liner to the reinforced automotive grade silicone coupler, every aspect is covered for a perfect and secure fit. |
| Description_MKT |
Hassle-Free Installation: Make it easy! By designing this kit in a 3D workspace, you're ensured a quick and easy installation that not only increases the power output of your engine, but also provides a clean and powerful look that others see every time you pop your hood. |
| Description_MKT |
Dyno Proven: Clean and simple, NUMBERS talk! Injen has put in the time and diligence to stand behind our performance data. We put in the time to test and prove that we have developed a superior kit for your Audi/Volkswagen MK7. After hours of designing and dyno testing, Injen is proud to say that the EVO3003 Evolution Air Intake system puts down numbers of up to 19 additional horsepower and 24 Ft.-lbs. of torque. |
| Description_INV |
Injen Evolution Intake |
| Heat Shield Included |
No |
| Mounting Hardware Included |
Yes |
| Prop 65 - Short Label |
prop65_warning.jpg |
| Red Hydroshield (Optional) |
N/A |
| Replacement Filter Part Number |
X-1128-BB |
| Tube Material |
Rotomolded XLPE |
| Universal or Specific Fit |
Specific |
| Compatible Throttle Controller |
PT0009B |
| Filter Color |
Blue |
| Grade Type |
Performance |
| Prop 65 Yes/No |
Yes |
| Title |
Injen EVOLUTION Cold Air Intake System |
| Black Hydroshield (Optional) |
N/A |
| Filter Media |
SuperNano-Web Dry |
| HP Gain |
19 |
| Intake Color |
Black |
| Prop 65 (C, R or CR) |
CR |
| TQ Gain |
24 |
| Length |
13.0000 |
| Width |
17.0000 |
| Height |
34.0000 |
| Weight |
13.0000 |
