| Description_DEF |
Engine Cold Air Intake |
| Description_DES |
EVOLUTION Cold Air Intake System |
| Description_EXT |
EVOLUTION Cold Air Intake System, Part No. EVO1102, 2015-2018 BMW M3 L6-3.0L Twin Turbo (F80), 2015-2020 BMW M4 L6-3.0L Twin Turbo (F82/83), 2019-2021 BMW M2 Competition L6-3.0L Twin Turbo (F87). |
| Description_FAB |
Dyno Proven gains of up to 22 hp and 27 lb-ft. of torque |
| Description_FAB |
Designed to work with the stock calibration |
| Description_FAB |
Aggressive intake growl under acceleration |
| Description_FAB |
Durable Roto-Molded Polyethylene tubes and housings |
| Description_FAB |
Twist-Lock Technology to securely integrate the air filter to the housing |
| Description_FAB |
Reinforced automotive grade silicone couplers |
| Description_FAB |
Fully serviceable Injen SuperNano-Web dry air filter |
| Description_FAB |
Replacement air filter # X-1097-BB |
| Description_FAB |
Stainless steel band clamps with inner protective liner |
| Description_FAB |
Aggressive underHood appearance while maintaining an OE fit |
| Description_FAB |
Our clear inspection badge allows you to quickly check the condition of your air filter while the red stripe enhances underHood appearances. |
| Description_FAB |
Made in Pomona, California USA |
| Description_FAB |
Injen Technology Limited Lifetime Warranty |
| Description_FAB |
This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles. |
| Description_FAB |
Patent Pending |
| Description_MKT |
Injen is proud to be introducing the all new Evolution sealed cold air intake system for the 2015-2020 BMW M3/M4 ans 2019-2021 M2 Compeition! This intake has been designed using the some of the most up-to-date engineering tools and techniques to produce a top notch kit. This intake system is on a whole new level with one-piece sealed housings that utilize the all new Injen Twist-lock System (Patent Pending) to securely attach the Injen SuperNano-Web Dry air filters in place. This cold air intake also has our distinctive sight window that not only allows easy inspection of the air filters, but it really pops under your hood too. This kit ships complete with premium hardware to provide you the absolute best intake kit available for your BMW M3 and M4. |
| Description_MKT |
Roto-molded Housings: Both of the one-piece sealed housings utilize the all new Injen Twist-lock System (Patent Pending) to securely attach the SuperNano-Web Dry air filter in place which eliminates the use of unnecessary hardware and provides a simple installation that anyone can accomplish. To top it all off, the housings sport our all new ClearVue badge for easy filter inspection and also provides a clean look that pops every time you open the hood. |
| Description_MKT |
Roto-molded Intake Tubes: This Evolution Air Intake System uses a couple of custom designed and dyno-tuned, intake tubes to produces huge power gains while retaining a clean and quality fit. |
| Description_MKT |
SuperNano-Web Dry Air Filters: The SuperNano-Web Dry air filter is uniquely designed to work with the Injen Technology Twist-Lock System (Patent Pending). The Twist-Lock system has allowed our engineers to use one of the largest filters possible to increases air volume while keeping the installation process simple. |
| Description_MKT |
Quality Hardware: Stainless Steel Band Clamps with inner protective liner and reinforced automotive grade silicone couplers are used to provide the most secure installation available. |
| Description_MKT |
Hassle-Free Installation: Created and designed in 3D, our Evolution cold air intakes fit on a level equal to or above the OE system. Clean lines that flow with the entire engine compartment really set this intake apart from the competition. This Evolution cold air intake system also utilizes our all-new Twist-Lock System (Patent Pending) to provide the end user with one of the quickest and simplest installations available today. |
| Description_MKT |
Dyno Results: After hours of design and dyno testing, This Evolution Air Intake system was putting down 22 additional horsepower and 27 lbs. of torque. That's power that you'll instantly feel. |
| Description_SHO |
Evolution Intake |
| Description_INV |
Injen Evolution Intake |
| Filter Color |
Blue |
| Filter Media |
SuperNano-Web Dry |
| Red Hydroshield (Optional) |
N/A |
| Universal or Specific Fit |
Specific |
| Grade Type |
Performance |
| Intake Color |
Black |
| Title |
Injen EVOLUTION Cold Air Intake System |
| Black Hydroshield (Optional) |
N/A |
| Compatible Throttle Controller |
PT0008B |
| Heat Shield Included |
No |
| HP Gain |
22 |
| Mounting Hardware Included |
Yes |
| Patented MR Technology Incorporated |
Yes |
| Prop 65 - Short Label |
prop65_warning.jpg |
| Prop 65 (C, R or CR) |
CR |
| Prop 65 Yes/No |
Yes |
| Replacement Filter Part Number |
X-1097-BB |
| TQ Gain |
27 |
| Tube Material |
Rotomolded XLPE |
| Length |
13.0000 |
| Width |
17.0000 |
| Height |
28.0000 |
| Weight |
30.0000 |
