Your Small Town Parts Store With More!
×

(877) 743-7862

About Contact Blog
Wish Lists
0 My Cart

Your cart is currently empty.

Continue shopping
Total: $0.00
View cart
Toggle menu
0
  • Home
  • Hooker BHS5196 Blackheart Lt Swap Exhaust Manifolds - Rear Dump Sbc Exit - Natural Cast
-22%
Blackheart-Lt-Swap-Exhaust-Manifolds---Rear-Dump-Sbc-Exit---Natural-Cast
Blackheart-Lt-Swap-Exhaust-Manifolds---Rear-Dump-Sbc-Exit---Natural-Cast
Blackheart-Lt-Swap-Exhaust-Manifolds---Rear-Dump-Sbc-Exit---Natural-Cast
Blackheart-Lt-Swap-Exhaust-Manifolds---Rear-Dump-Sbc-Exit---Natural-Cast
Blackheart-Lt-Swap-Exhaust-Manifolds---Rear-Dump-Sbc-Exit---Natural-Cast
Blackheart-Lt-Swap-Exhaust-Manifolds---Rear-Dump-Sbc-Exit---Natural-Cast
Blackheart-Lt-Swap-Exhaust-Manifolds---Rear-Dump-Sbc-Exit---Natural-Cast
Blackheart-Lt-Swap-Exhaust-Manifolds---Rear-Dump-Sbc-Exit---Natural-Cast
Blackheart-Lt-Swap-Exhaust-Manifolds---Rear-Dump-Sbc-Exit---Natural-Cast
Blackheart-Lt-Swap-Exhaust-Manifolds---Rear-Dump-Sbc-Exit---Natural-Cast
Blackheart-Lt-Swap-Exhaust-Manifolds---Rear-Dump-Sbc-Exit---Natural-Cast
Click to zoom in
Load image into Gallery viewer, Blackheart-Lt-Swap-Exhaust-Manifolds---Rear-Dump-Sbc-Exit---Natural-Cast
Load image into Gallery viewer, Blackheart-Lt-Swap-Exhaust-Manifolds---Rear-Dump-Sbc-Exit---Natural-Cast
Load image into Gallery viewer, Blackheart-Lt-Swap-Exhaust-Manifolds---Rear-Dump-Sbc-Exit---Natural-Cast
Load image into Gallery viewer, Blackheart-Lt-Swap-Exhaust-Manifolds---Rear-Dump-Sbc-Exit---Natural-Cast
Load image into Gallery viewer, Blackheart-Lt-Swap-Exhaust-Manifolds---Rear-Dump-Sbc-Exit---Natural-Cast
Load image into Gallery viewer, Blackheart-Lt-Swap-Exhaust-Manifolds---Rear-Dump-Sbc-Exit---Natural-Cast
Load image into Gallery viewer, Blackheart-Lt-Swap-Exhaust-Manifolds---Rear-Dump-Sbc-Exit---Natural-Cast
Load image into Gallery viewer, Blackheart-Lt-Swap-Exhaust-Manifolds---Rear-Dump-Sbc-Exit---Natural-Cast
Load image into Gallery viewer, Blackheart-Lt-Swap-Exhaust-Manifolds---Rear-Dump-Sbc-Exit---Natural-Cast
Load image into Gallery viewer, Blackheart-Lt-Swap-Exhaust-Manifolds---Rear-Dump-Sbc-Exit---Natural-Cast
Load image into Gallery viewer, Blackheart-Lt-Swap-Exhaust-Manifolds---Rear-Dump-Sbc-Exit---Natural-Cast

Have Questions?

(877) 743-7862 Ask an Expert

  • Guaranteed Fitment

    Always the correct part

  • In-House Experts

    We know our products

  • Added Value

    Performance matched parts

  • Nationwide Delivery

    Economy shipping

Hooker BHS5196 Blackheart Lt Swap Exhaust Manifolds - Rear Dump Sbc Exit - Natural Cast

2 sold in last 8 days
Hooker
ds_BBVM_BHS5196
In stock
$637.21 $495.59
$495.59
customers are viewing this product
Hooker BHS5196 Blackheart Lt Swap Exhaust Manifolds - Rear Dump Sbc Exit - Natural Cast
Details

For applications or projects where our standard LT swap manifolds (BHS516 and BHS3116) don't quite fit and our "center dump" manifold (BHS5188) exits too far forward, our new rear dump and rear dump SBC exit cast iron swap manifolds have arrived. These differ in that they exit in a straight-down fashion much like a block hugger header but exit more toward the rear of the engine than our "center dump" manifolds.

Specifications:

Description_ASC NOTE: Not compatible with 2004-2006 GTO starters/bellhousings. Breaking in an engine with ceramic-coated versions of these manifolds will most likely result in damage to the coating and VOID all warranties providing coverage to it. HOOKER (TM) recommends using bare cast-iron manifolds or an old set of headers to break-in engines to avoid coating damage. Ceramic-coated manifolds require several heat cycles to fully cure before they will withstand extreme heat, so care should be taken to provide a series of 4 to 5 intermittent heat cycles to "set" the coating prior to putting the vehicle into service. An incremental increase in run duration and throttle angle should be added to each successive cycle; initial and final run durations between approximately 1 and 7 minutes will be sufficient to set the coating.
Description_DES Hooker BlackHeart LT Swap Exhaust Manifolds - Rear Dump SBC Exit - Natural Cast
Description_MKT For applications or projects where our standard LT swap manifolds (BHS516 and BHS3116) don't quite fit and our "center dump" manifold (BHS5188) exits too far forward, our new rear dump and rear dump SBC exit cast iron swap manifolds have arrived. These differ in that they exit in a straight-down fashion much like a block hugger header but exit more toward the rear of the engine than our "center dump" manifolds.
Description_MKT While almost the same as our BHS5192/93/94, the BHS5196 shares the same driver side manifold, but has the passenger side exit of traditional Small Block Chevrolet manifolds (see 8525HKR) to guarantee fitment and possibly bolt up your existing exhaust when doing an LS swap. Cast out of the same Hi-Silicon-Moly Ductile Iron as most of our other lines, it will be tough to find a more durable, streamlined, and quiet exhaust option. Available in natural cast, silver ceramic, or black ceramic finishes, these manifolds are offered with flanges, gaskets, and flange hardware for connecting to our lineup of adapter pipe kits or for ease in fabricating your own custom exhaust.
Description_FAB Similar to SBC manifolds (8525HKR) but for Gen V LT engines - same exit centerline but raised up 1.36-inches (driver side) / tucked in tighter by 0.625-inches on (passenger side)
Description_FAB 2.5-inch outlet diameter offers improved flow for maximum performance from a cast iron exhaust manifold
Description_FAB Tight tuck design that provides an exit between our standard swap manifolds and center dump manifolds (with passenger side SBC exit)
Description_FAB Intended for GM LT engine swap applications where durability, quiet operation, and leak-free sealing is desired
Description_FAB Available in Natural as-cast finish for a factory appearance, silver ceramic, or black ceramic
Description_FAB Cast from Hi-Silicon-Moly Ductile Iron to provide durability and corrosion resistance
Description_FAB Perfect complement to Hooker engine swap mount plates and Holley engine swap oil pans
Description_FAB Hardware included: Nickel plated steel mating flanges, MLS mating flange gaskets, and mating flange hardware
Description_KEY sbc rear dump manifold; lt rear dump sbc; lt rear dump exhaust manifold;LT swap manifolds; LT exhaust manifolds; LT swap exhaust; exhaust manifolds; cast exhaust manifolds; C10 LT swap exhaust manifolds; small block chevrolet exit swap exhaust manifolds;
Description_EXT Multi-Fit - GM Gen V LT Engines - 2.50-in. Outlet
Description_INV MANIFOLD, EXHAUST, LT SBC EXIT - RAW
Bolt size M8 x 1.25 x 25mm
Header Finish Natural
Tube Material Cast Iron
Brand Hooker BlackHeart
Choose Your Part Manifold
Emission Code 8
Exhaust Manifold Style Rear Dump SBC Exit
Finish Natural
Flange Style 2-Bolt
Application Multi-fit
Collector Diameter 2.50 inch
Exhaust Series Hooker
Header Style Manifold
Material Cast Iron
Primary Tube Dia. 1-3/4 inch
Product Type Manifold
Subframe Stock
Type of Component Manifold
Length 9.0000
Width 11.9000
Height 20.8000
Weight 28.3100
Read More
Read Less
We use cookies to improve your experience on our website. Read about how we use cookies in our Privacy Policy. By browsing this website, you agree to our use of cookies. privacy policy
accept

Your cart

×