These Adapter Pipes are a great start when trying to connect Hooker Blackheart LS/LT Exhaust Manifolds to a catalytic converter and Hooker Blackheart exhaust system. The BH14351 best fits 4WD GM C1500 "OBS" projects that are planning on running a set of Hooker Blackheart LS or LT swap exhaust manifolds (8502HKR, BHS518, etc.) and need a great adapter piece to accomplish two things: 1) fill the gap between the end of the manifold and 2.50-inch inlet exhaust systems and 2) easily incorporate a catalytic converter.
Specifications:
Description_ASC |
These kits were designed for compatibility with Hooker Blackheart engine mounting brackets listed for this vehicle application only. They are designed to provide the user with a means of installing the factory catalytic converters from a 1999-2006 5.3 or 6.0-liter Chevy Silverado truck (4.00-inch maximum diameter), into this vehicle application, within the stipulations/requirements published by CARB/EPA for emissions-legal engine changes. The ability of the final fabricated assembly to satisfy these requirements should be confirmed with local/state authorities prior to the installation of these components. |
Description_DES |
Hooker BlackHeart Exhaust Adapter Kit - 4WD |
Description_EXT |
Fits Hooker BlackHeart LS or LT Swap Exhaust Manifolds on C1500 Trucks and SUVs to Dual 2.5-inch Exhaust - 4WD Applications |
Description_FAB |
Pre-marked sections for easily cutting and installing catalytic converters in their place |
Description_FAB |
O2 Sensor bungs already welded in ideal location |
Description_FAB |
409 Stainless Steel construction for long life and durability |
Description_FAB |
OE quality O.D. to O.D. connection solution for eliminating 3-bolt collector gaskets |
Description_FAB |
Designed for use with any of our Hooker Blackheart LS and LT Swap exhaust manifolds (8501HKR or BHS516 variants) |
Description_FAB |
Hardware included. Gaskets for the two bolt flange included with the Hooker Blackheart exhaust manifolds |
Description_FAB |
For 4WD C1500/GMT400 Applications |
Description_KEY |
c1500; c1500 ls swap; c1500 lt swap; GMT400; gmt400 ls swap; gmt400 lt swap; obs truck ls swap; obs lt swap; obs ls swap; obs truck lt swap; obs truck exhaust; gmt 400 swap exhaust;c1500 swap exhaust; gmt400 exhaust adapter; c1500 exhaust adapter; obs truck exhaust adapter |
Description_MKT |
These Adapter Pipes are a great start when trying to connect Hooker Blackheart LS/LT Exhaust Manifolds to a catalytic converter and Hooker Blackheart exhaust system. The BH14351 best fits 4WD GM C1500 "OBS" projects that are planning on running a set of Hooker Blackheart LS or LT swap exhaust manifolds (8502HKR, BHS518, etc.) and need a great adapter piece to accomplish two things: 1) fill the gap between the end of the manifold and 2.50-inch inlet exhaust systems and 2) easily incorporate a catalytic converter. |
Description_MKT |
These kits were designed for compatibility with Hooker Blackheart engine mounting brackets listed for this vehicle application only. They are designed to provide the user with a means of installing the factory catalytic converters from a 1999-2006 5.3 or 6.0-liter Chevy Silverado truck (4.00-inch maximum diameter), into this vehicle application, within the stipulations/requirements published by CARB/EPA for emissions-legal engine changes. The ability of the final fabricated assembly to satisfy these requirements should be confirmed with local/state authorities prior to the installation of these components. |
Description_INV |
1988-00 4WD CHEVY TRUCK MANIF. ADAPTERS |
Outlet Diameter (in) |
2.5 |
Brand |
Hooker BlackHeart |
Engine |
GM Gen III/IV (LS) |
Choose Your Part |
Adapter Kit |
Drive |
4WD |
Emission Code |
8 |
Exhaust Series |
Hooker BlackHeart |
Product Type |
Adapter Kit |
Race Only |
Yes |
Tube Diameter |
2.5 inch |
Application |
1988-2000 GM OBS Truck SUV |
Finish |
Natural |
Inlet Diameter (in) |
2.5 |
Rear Suspension |
Stock |
Material |
409 Stainless Steel |
Length |
17.0000 |
Width |
20.7000 |
Height |
53.0000 |
Weight |
21.2500 |