Finish off your swap with a high-quality exhaust system for the 1987-1995 Jeep Wrangler YJ. The system is designed to work with GM LS, Gen V LT, or Gen 3 Hemi engine swaps but can be used with any engine. This 3" system is designed to be compatible with any stock-type rear suspension system, bigger wheel and tire assemblies and/or bolt-on lift kits. For off-road enthusiasts, the high-tuck design will clear any obstacles you choose to tackle, but is still big enough for V8 performance. With a mellow tone at idle and an aggressive note under acceleration, it will be hard to hide the extra power you have.
Specifications:
Description_DEF |
Exhaust System Kit |
Description_EXT |
Blackheart Exhaust System; Fits w/1987-95 Wrangler YJ LS/Gen-V LT/Gen 3 Hemi Engine Swap; 3 in. Tubing; 304 Stainless Steel; Incl. Hardware; |
Description_DES |
Hooker Blackheart Engine Swap Exhaust System |
Description_SHO |
Exhaust System Kit |
Description_MKT |
Finish off your swap with a high-quality exhaust system for the 1987-1995 Jeep Wrangler YJ. The system is designed to work with GM LS, Gen V LT, or Gen 3 Hemi engine swaps but can be used with any engine. This 3" system is designed to be compatible with any stock-type rear suspension system, bigger wheel and tire assemblies and/or bolt-on lift kits. For off-road enthusiasts, the high-tuck design will clear any obstacles you choose to tackle, but is still big enough for V8 performance. With a mellow tone at idle and an aggressive note under acceleration, it will be hard to hide the extra power you have. |
Description_FAB |
Exhaust System Designed Specifically for Jeep Wrangler YJ with GM LS, Gen-V LT and Gen 3 Hemi Engine Swap |
Description_FAB |
3" Diameter Tubing - Increased Exhaust Flow Capacity for V8 Engine Swaps |
Description_FAB |
Bolt-On Compatible with Hooker Blackheart Jeep Wrangler YJ Engine Swap Y-Pipes |
Description_FAB |
Tight-tucked Tip Exit Location Improves Functional Off-Road Clearance |
Description_FAB |
Designed for use with Stock, or Lifted Stock Rear Suspension Systems |
Description_FAB |
Compatible with Stock Height, or 1" Lift Body Mounts |
Description_FAB |
Compatible with Stock 15 & 20 Gallon Fuel Tanks/Skid Plates |
Description_FAB |
Made from Lightweight 18-Gauge Mandrel Bent 304 Stainless Steel - for Strength & Durability |
Description_FAB |
100% Quality Hand-Welded for Strength, Longevity & Good Looks |
Description_FAB |
Uses Factory Mounting Points for Factory like fitment |
Description_FAB |
Tube Geometry Designed for Maximum Clearance & Hassle-Free Installation |
Description_FAB |
All Hardware Included |
Description_FAB |
Manufacturer's Limited Lifetime Warranty |
Description_INV |
1987-95 JEEP WRANGLER ENGINE SWAP EXH |
Product Type |
Exhaust System |
WARNING CA Proposition 65 |
Yes |
Exhaust Series |
Hooker BlackHeart |
Inlet Diameter (in) |
3 |
Single Dual |
Single |
Material |
304 Stainless Steel |
Application |
1987-1995 Jeep Wrangler YJ |
Sale Category |
Exhaust |
WARNING CA Proposition 65 Message |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
Outside Diameter (In) |
3 |
Sound Level |
Aggressive / Moderate |
Tubing Diameter (in) |
3 |
Warning |
California Proposition 65 |
Tubing Diameter |
3.000 in. |
Brand |
Hooker BlackHeart |
Exit Position |
Single Rear Exit |
Engine |
Chrysler Gen III Hemi, GM Gen III/IV/IV (LS/LT) |
Muffler Quantity |
1 |
Emission Code |
8 |
System Type |
Crossmember-back, Swap |
Clearance Category |
Exhaust |
Length |
10.1000 |
Width |
21.7000 |
Height |
42.4000 |
Weight |
24.2000 |