| Description_ASC |
*All transmissions covered require the use of an adapter, as listed in the overview below
This crossmember is designed to be installed with Hooker Blackheart Polyurethane mounts (71223030HKR in red or 71223029HKR in black), Prothane (TM) 7-1604 poly mount, or Anchor (TM) 2268 rubber style transmission mount for all transmission applications listed for this crossmember. TKO, TKX, and TR-3550 transmission extension housings that are drilled/tapped only with the Ford mount pattern will need to be drilled/tapped with the narrower pattern required to attach the above-mentioned GM-style mounts.
The dual-arch exhaust passages are provided for installation of available Hooker Blackheart 2.5" and 3" exhaust systems for this application, or any custom system of your choice. |
| Description_DEF |
Transmission Crossmember |
| Description_DES |
Hooker BlackHeart Transmission Crossmember |
| Description_KEY |
SN95 LS swap transmission crossmember; 94 mustang ls swap crossmember; 95 mustang ls swap crossmember; 96 mustang ls swap crossmember; 97 mustang ls swap crossmember; 98 mustang ls swap crossmember |
| Description_FAB |
Comprehensively designed as part of the Hooker Blackheart LS and Coyote engine swap systems for SN95 Ford Mustangs; provides maximized level of inter-component compatibility |
| Description_FAB |
LS Swap Compatibility - Designed to be used with Hooker Blackheart 71221011HKR engine adapter plates using the stock 1996-2004 OE K-member |
| Description_FAB |
Coyote Swap Compatibilty - Designed for use with Hooker Blackheart engine mounting brackets in Coyote swaps using AJE MU-40-UM and Team Z TZM-KM-SWAP K-members (BHS501 through 502) |
| Description_FAB |
Designed for use with Prothane (TM) 6-504 engine mounts in Coyote swaps using Maximum Motorsports MMKM-2/MMKM-2.1 K-members |
| Description_FAB |
High-arch passages provide maximum available exhaust ground clearance |
| Description_FAB |
Design geometry replicates stock Ford drivetrain height, inclination angle and offset for optimized vehicle and component compatibility |
| Description_FAB |
Powder coated steel construction provides an attractive, strong and stiff transmission mounting solution |
| Description_FAB |
Hardware included |
| Description_FAB |
Manufacturer's limited lifetime warranty |
| Description_INV |
94-98 MUSTANG LS-SWAP TRANS CROSSMEM |
| Description_EXT |
1994-1998 Mustang Engine Swap Transmission Crossmember* LS (Powerglide, TH350, TKO, TKX, & 4L60-4L70) Coyote (Powerglide, TKO & TR-3550) |
| Description_SHO |
TransXmbr |
| Description_MKT |
Hooker Blackheart has quickly become the leader in engine swap system design and we are excited to announce new LS and Coyote engine swap products for 1994-1998 Ford Mustangs. This Hooker Blackheart engine swap transmission crossmember is designed to be used with Hooker Blackheart engine mount adapter plates or mounting brackets designed for vehicles that are equipped with stock OE (1996-2004 only) or specific AJE, Team Z, or Maximum Motorsports aftermarket engine K-members. |
| Description_MKT |
The following list contains the adapter plates needed for this crossmember to be used with various transmissions. |
| Description_MKT |
LS Swap: |
| Description_MKT |
Provides for installation of a Powerglide, TH350, TKO, TKX, or 4L60-4L70 transmission using the following adapters: |
| Description_MKT |
Powerglide or TH350 transmission - 71222014HKR |
| Description_MKT |
TKO, TKX, or 4L60-70 transmission - 71223012HKR |
| Description_MKT |
Coyote Swap: |
| Description_MKT |
Provides for installation of a Powerglide, TKO, TKX, or TR-3550 transmission using the following adapters: |
| Description_MKT |
Powerglide - BHS508 |
| Description_MKT |
TKO, TKX, or TR-3550 transmission - 71223012HKR |
| Description_MKT |
Once the adapter plate is chosen, complete your setup with Hooker Blackheart Polyurethane mounts (71223030HKR in red or 71223029HKR in black). |
| Bracket Finish |
Black |
| Bracket Material |
Steel |
| Emission Code |
6 |
| Material |
Steel |
| Transmission Type |
Powerglide / TH350 / TKO / 4L60-4L70 |
| Application |
94-98 Mustang LS Swap |
| Discount Percentage |
26-50% |
| Engine |
Ford Coyote, GM Gen III/IV (LS) |
| Finish |
Black Powdercoated |
| Motor Type |
Ford Coyote, GM LS |
| WARNING CA Proposition 65 |
No |
| Brand |
Hooker BlackHeart |
| Clearance Category |
Suspension and Chassis |
| Color |
Black |
| K-Member Compatibility |
AJE (MU40UM), Stock, Team Z (TZM-KM-SWAP4) |
| Product Type |
Transmission Crossmember |
| Sale Category |
Suspension and Chassis |
| Transmission |
4L60E, 4L65E, 4L70E, Powerglide, TH350, TKO 500/600 Chevy, TKO 500/600 Ford, TKX, TR3550 |
| Type of Component |
Crossmember |
| Warning |
California Proposition 65 |
| Length |
7.0000 |
| Width |
8.0000 |
| Height |
34.0000 |
| Weight |
10.0000 |
