The amazing HydraMat (R) is Holley's patent pending design that solves the problems associated with traditional fuel pick-ups in stock fuel tanks as well as racing fuel cells. During hard cornering, acceleration, stopping, inclines, and low fuel conditions fuel runs away from the fuel pick up which introduces air into the system resulting in poor engine performance and even stalling. HydraMat is the solution!
Surface tension and fluid wicking are the secrets of the HydraMat, giving it the amazing ability to draw from nearly any area that has contact with fuel and then store it in its internal reservoir. As an area of the HydraMat is uncovered, the tiny pores of the media seal off through surface tension, forcing fuel to be contained in the reservoir and drawn from other areas of the mat where fuel continues to be available. The sheer size and coverage area of the HydraMat allows it to pull fuel from virtually any area in the tank or cell eliminating the need for specialty reservoirs and pick up pumps saving cost and greatly reducing complexity.
HydraMats are available in various sizes and shapes to fit a variety of stock fuel tanks and/or race fuel cells.
Specifications:
| Description_ASC |
Fitting location designed for unviversal use
Designed to fit flat bottom rectangular style fuel cells with minimum dimensions of 8" long and 3" wide
For best performance, the return fuel should be discharged near the pick-up of the HydraMat at a minimum distance of 1 inch above the mat.
HydraMats with a female NPT thread do not require the use of a sealing paste or tape. Use of a sealing paste or tape could result in fuel pump failure. |
| Description_DEF |
Fuel Tank Pickup |
| Description_DES |
8" x 3" HydraMat (R), Rectangle |
| Description_EXT |
HydraMat Fuel Reservoir System; 8 in. Long x 3 Wide in. Rectangle; 15 Micron; Center Outlet 3/8 in. NPT; |
| Description_INV |
HYDRAMAT (3X8 RECT) - CENTER OUT - 3/8 |
| Description_KEY |
hydramat;Hydramat;hydromat;Hydromat;hydra matt;hydra;hydra mat;hyabusa;HydraMat;HYDRAMAT;Hydro;hydro mat;hydro-mat;HydroMat;hyrdo mat;hyromate;mat;matt;Fuel Mat;Jolley matt;mats;Hidromat |
| Description_FAB |
Patent Pending Solves Problems w/Traditional Fuel Pick-Ups |
| Description_FAB |
Reduces Potential For Air To Enter Fuel System |
| Description_FAB |
Vehicles w/Fuel Starvation At Hard Corners/Stops/Inclines/Low Fuel |
| Description_FAB |
Surface Tension/Fluid Wicking Allow Hydramat To Draw Fuel |
| Description_FAB |
Area Of Hydramat Is Uncovered Tiny Pores In Media Seal |
| Description_FAB |
Internal Reservoir Assists Fuel Available At The Pickup |
| Description_FAB |
Eliminates Specialty Reservoirs Sumps/Pick Up Pumps |
| Description_FAB |
No Need For A Separate Filter Before The Fuel Pump |
| Description_FAB |
Can Be Folded and Compressed For Easy Install |
| Description_FAB |
Hydramats Fit A Variety Of Stock Fuel Tanks/Race Fuel Cells |
| Description_SHO |
Fuel Tank Pickup |
| Description_MKT |
The amazing HydraMat (R) is Holley's patent pending design that solves the problems associated with traditional fuel pick-ups in stock fuel tanks as well as racing fuel cells. During hard cornering, acceleration, stopping, inclines, and low fuel conditions fuel runs away from the fuel pick up which introduces air into the system resulting in poor engine performance and even stalling. HydraMat is the solution!
Surface tension and fluid wicking are the secrets of the HydraMat, giving it the amazing ability to draw from nearly any area that has contact with fuel and then store it in its internal reservoir. As an area of the HydraMat is uncovered, the tiny pores of the media seal off through surface tension, forcing fuel to be contained in the reservoir and drawn from other areas of the mat where fuel continues to be available. The sheer size and coverage area of the HydraMat allows it to pull fuel from virtually any area in the tank or cell eliminating the need for specialty reservoirs and pick up pumps saving cost and greatly reducing complexity.
HydraMats are available in various sizes and shapes to fit a variety of stock fuel tanks and/or race fuel cells. |
| Fitting Size |
0.375 in. NPT |
| Micron |
15 |
| Length |
8.000 in. |
| Emission Code |
5 |
| Product Length |
8.000 in. |
| WARNING CA Proposition 65 |
No |
| Width |
3.000 in. |
| Micron Rating |
15 |
| Brand |
Holley |
| Product Type |
HydraMats |
| Sale Category |
Air and Fuel Delivery |
| Warranty |
Limited 90 Day |
| Length |
3.0000 |
| Width |
4.0000 |
| Height |
8.0000 |
