Are you interested in an EFI retrofit kit, but just cant get past the complication of the fuel system Holley is proud to introduce their Universal In-Tank Retrofit Fuel Modules! Available in return and returnless versions, you can rest assured Holley has the solution you need for your EFI fuel pump woes. Now you can convert your factory tank or fuel cell to an in-tank EFI fuel system quickly and easily! And- add the benefits of a Holley Hydramat in the process! The conversion is easily accomplished with basic tools and requires no welding or fabrication. The aluminum module design includes a die cast pump hanger bracket to control pump vibration while also providing a low profile 5 inch diameter design to fit where space is at a premium. Holleys innovative clamping system and integrated fuel pump makes it easy. Once installed, hook up your fuel lines and your power source/ground and youre off and running! NO hassle! Supports up to 875 EFI or 1100 Carb HP (@ 60 PSI at 13.5 Volts / 16.9 AMP Draw) Of course there are many variables, estimates are based on gasoline. Individual systems will vary based on fuel system design, regulator type, fuel cell location, etc...
Specifications:
| Description_DES |
Fuel Pump Hanger Assembly |
| Description_DEF |
Fuel Pump Mounting Kit |
| Description_FAB |
The Easiest Way To Convert To An In-Tank EFI System |
| Description_FAB |
Installs In Any Fuel Tank From 6.5 to 12 in. Deep |
| Description_FAB |
Low Profile Design Is Only 1.275 in. Thick Above Tank Surface |
| Description_FAB |
Innovative Clamping System |
| Description_FAB |
Clamping System Allows You To Rotate The Unit 360 Degrees |
| Description_FAB |
Die Cast Aluminum For Corrosion Resistance |
| Description_FAB |
1/4 in. NPT Ports |
| Description_EXT |
Fuel Pump Hanger Assembly; For Use w/Die Cast Retrofit Billet Return 450 LPH Fuel Pump; |
| Description_SHO |
FuelPmpMntingKt |
| Description_MKT |
Are you interested in an EFI retrofit kit, but just cant get past the complication of the fuel system? Holley is proud to introduce their Universal In-Tank Retrofit Fuel Modules! Available in return and returnless versions, you can rest assured Holley has the solution you need for your EFI fuel pump woes. Now you can convert your factory tank or fuel cell to an in-tank EFI fuel system quickly and easily! And- add the benefits of a Holley Hydramat in the process! The conversion is easily accomplished with basic tools and requires no welding or fabrication. The aluminum module design includes a die cast pump hanger bracket to control pump vibration while also providing a low profile 5 inch diameter design to fit where space is at a premium. Holleys innovative clamping system and integrated fuel pump makes it easy. Once installed, hook up your fuel lines and your power source/ground and youre off and running! NO hassle! Supports up to 875 EFI or 1100 Carb HP (@ 60 PSI at 13.5 Volts / 16.9 AMP Draw) Of course there are many variables, estimates are based on gasoline. Individual systems will vary based on fuel system design, regulator type, fuel cell location, etc... |
| Thread Size |
1/4NPT |
| Material |
Cast Aluminum |
| WARNING CA Proposition 65 |
Yes |
| Fully Open |
450 |
| WARNING CA Proposition 65 Message |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Fuel Type |
E85 |
| Nozzle Type |
Tube Type |
| Diameter (in.) |
4.800 in. |
| Nozzle Size |
0.037 in. |
| Length |
6.0000 |
| Width |
6.0000 |
| Height |
19.0000 |
| Weight |
3.0000 |
