Holley's Truck Avenger series carburetors have just been taken to the next level. Truck Avenger carburetors are known to go off-roading right out of the box, so what could be better than a Holley Truck Avenger™ carburetor How about one in aluminum They save weight and look great. The Aluminum Truck avenger features a chromate finish to protect against the grueling environments encountered by an off-road vehicle. The Aluminum Truck Avenger is designed specifically for off-road applications. The unique fuel metering block eliminates fuel spillover through the boosters at extreme angles allowing for 40 degree climbing, 30 degree side hill maneuvers and nose-down descents to avoid hesitations, stalling and flooding typically associated with carbs in an off-road environment.The Aluminum Truck Avenger carburetors have the same great features as their zinc counterparts such as a quick change vacuum secondary for easy fine tuning; four vacuum ports for all necessary vacuum accessories; manual choke for precise cold start control; and a built-in fuel filter.The 670 CFM Aluminum Truck Avenger is the perfect carburetor for small blocks or stock big block engines.
Specifications:
| Description_ASC |
Notice - Due to the natural color variations of the dichromate plating process, the plating color may vary from casting to casting (within a carburetor) and from carburetor to carburetor. This is considered normal and is not a cosmetic defect. If you desire a carburetor with no color variation, please shop our black and shiny finish carburetors. |
| Description_DEF |
Carburetor |
| Description_EXT |
Off-Road Truck Avenger Carburetor; 4 bbl; 670 cfm; Model 4150; Vacuum Secondary; Electric Choke; Gasoline; Single Fuel Inlet; Aluminum; Gold Dichromate Finish; |
| Description_DES |
670 CFM Holley Off-Road Truck Avenger Carburetor |
| Description_SHO |
Carburetor |
| Description_MKT |
Holley's Truck Avenger series carburetors have just been taken to the next level. Truck Avenger carburetors are known to go off-roading right out of the box, so what could be better than a Holley Truck Avenger™ carburetor? How about one in aluminum? They save weight and look great. The Aluminum Truck avenger features a chromate finish to protect against the grueling environments encountered by an off-road vehicle. The Aluminum Truck Avenger is designed specifically for off-road applications. The unique fuel metering block eliminates fuel spillover through the boosters at extreme angles allowing for 40 degree climbing, 30 degree side hill maneuvers and nose-down descents to avoid hesitations, stalling and flooding typically associated with carbs in an off-road environment.The Aluminum Truck Avenger carburetors have the same great features as their zinc counterparts such as a quick change vacuum secondary for easy fine tuning; four vacuum ports for all necessary vacuum accessories; manual choke for precise cold start control; and a built-in fuel filter.The 670 CFM Aluminum Truck Avenger is the perfect carburetor for small blocks or stock big block engines. |
| Description_FAB |
Aluminum Construction for added weight savings |
| Description_FAB |
Gold Dichromate finish for extreme off road environments |
| Description_FAB |
Single feed fuel inlet for ease of installation |
| Description_FAB |
Optimized off-road calibration that works out-of-the-box |
| Description_FAB |
Manual choke (Cable driven, hand operated) for precise cold start control |
| Description_FAB |
Vacuum secondaries allow use on a wide variety of vehicles. Quick Change vacuum housing cap allows you to tune for performance or fuel economy (springs included) |
| Description_FAB |
Compatible with GM, Chrysler, and Ford A/T kickdown linkage. Additional parts may be required. |
| Description_FAB |
One piece off-road vent tube eliminates fuel spillover during extreme maneuvers |
| Description_FAB |
Intended for off-road/off-angle use. Unique metering block designed for flood free operation up to 40┬║ while climbing and 30┬║ during side hill maneuvers & ΓÇ£nose down" descents |
| Description_FAB |
100% wet-flow tested by Holley technicians to assure it arrives ready to run! |
| Description_FAB |
Limited lifetime warranty - Guaranteed to be free from defects in material and workmanship for the life of the product |
| Description_INV |
670 ALUM TRUCK AVENGER M/C |
| Condition |
New |
| Carburetor Type |
4150 |
| Material |
Aluminum |
| Warning |
California Proposition 65 |
| Supercharged Application |
No |
| Flange |
Square Bore |
| Barrel |
Four |
| WARNING CA Proposition 65 Message |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Fuel Inlet |
Single |
| Type |
Automotive |
| Marine Use |
No |
| Throttle Bore |
1.688 inch |
| Vacuum Ports |
1 timed (spark) port, 2 full, and 1 PCV port |
| WARNING CA Proposition 65 |
Yes |
| CFM |
670 |
| Secondary Main Jet |
89 |
| Carburetor Use |
Off-Road |
| Model |
4150 |
| Product Type |
Carburetor |
| Secondaries |
Vacuum |
| Warranty |
Limited Lifetime Warranty |
| Primary Power Valve |
6.5 |
| Booster Type |
Annular / Straight |
| Finish |
Gold Dichromate |
| Secondary Type |
Vacuum |
| Choke |
Manual |
| Fuel Type |
Gasoline |
| Vacuum Port Quantity |
1 timed (spark); 2 full; 1 PCV |
| Primary Main Jet |
68 |
| Usage |
Off-Road |
| Emission |
Without EGR |
| Barrels |
4 |
| Booster |
Annular / Straight |
| Brand |
Holley |
| Emission Code |
3 |
| Fuel |
Gasoline |
| Primary Pump Nozzle Size |
28 |
| Length |
8.0000 |
| Width |
11.0000 |
| Height |
13.0000 |
| Weight |
8.0000 |
