Holley HP(TM); carburetors have been the standard in racing carburetors for nearly two decades. Powering the biggest names in NASCAR to the Saturday night racer, HP carburetors are the perfect choice for all types of motorsports. Supercharger HP carburetors are available in 600, 750 and 950 CFM and feature a contoured venturii inlet for balanced air flow, screw in air bleeds for precision tuning capabilities, high flow metering blocks and Dominator style fuel bowls which allow pluming from either side for ease of installation. Supercharger HP carburetors also have a unique capability that allows their power valves to reference the intake manifold vacuum below the supercharger. This allows the power valve to operate as it should, based off intake manifold vacuum. A power valve provides further enrichment to the main metering system under load (low vacuum) conditions. Holley HP carburetors are the standard for square bore race carburetors. Race-Ready out of the box!
Specifications:
Description_DEF |
Carburetor |
Description_DES |
Supercharger Carburetor |
Description_EXT |
Supercharger Carburetor; 4 bbl; 950 cfm; 2 Circuit Metering; Model 4150HP; Mech Secondary; No Choke; Gas; Dual Fuel Inlet; Double Accelerator Pump; Gold Dichromate Finish; |
Description_FAB |
Tumble Polished Shiny Finish For Good Looks |
Description_FAB |
Contoured Venturi Inlet Balances Airflow For Increased hp |
Description_FAB |
Screw In Air Bleeds For Precision Tuning Capabilities |
Description_FAB |
Dual 30cc Accelerator Pumps |
Description_FAB |
Dual Feed Fuel Inlets For Constant High Volume Fuel Delivery |
Description_FAB |
Mechanical Secondaries For Perfect Off The Line Launches |
Description_FAB |
4 Corner Idle Allows You To Precisely Control Your Idle System |
Description_FAB |
Boost Referenced Power Valve For Enrichment Under Acceleration |
Description_FAB |
Throttle Lever Cut Off For Clearance On A Sideways Application |
Description_FAB |
100% Wet Flow Tested By Holley Technicians |
Description_FAB |
Arrives Ready To Run |
Description_SHO |
Carburetor |
Description_MKT |
Holley HP(TM); carburetors have been the standard in racing carburetors for nearly two decades. Powering the biggest names in NASCAR to the Saturday night racer, HP carburetors are the perfect choice for all types of motorsports. Supercharger HP carburetors are available in 600, 750 and 950 CFM and feature a contoured venturii inlet for balanced air flow, screw in air bleeds for precision tuning capabilities, high flow metering blocks and Dominator style fuel bowls which allow pluming from either side for ease of installation. Supercharger HP carburetors also have a unique capability that allows their power valves to reference the intake manifold vacuum below the supercharger. This allows the power valve to operate as it should, based off intake manifold vacuum. A power valve provides further enrichment to the main metering system under load (low vacuum) conditions. Holley HP carburetors are the standard for square bore race carburetors. Race-Ready out of the box! |
Emission |
Without EGR |
Fuel Type |
Gasoline |
Secondary Type |
Mechanical |
Flange |
Square Bore |
Choke |
None |
WARNING CA Proposition 65 |
Yes |
Finish |
Gold Dichromate |
Venturii Size |
1.375 in. |
Material |
Zinc |
Secondary Power Valve |
10.5 |
Throttle Bore |
1.750 in. |
Fuel Inlet |
Dual |
WARNING CA Proposition 65 Message |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
Carburetor Type |
4150 |
Usage |
Street/Strip |
Type |
Automotive |
Barrel |
Four |
CFM |
950 |
Primary Main Jet |
80 |
Secondary Pump Nozzle Size |
31 |
Secondary Main Jet |
86 |
Circuit |
2 |
Supercharged Application |
Yes |
Booster Type |
Down Leg |
Primary Power Valve |
10.5 |
Length |
8.0000 |
Width |
11.0000 |
Height |
8.0000 |
Weight |
12.0000 |