Holley is proud to introduce the all new aluminum Track Warrior carburetors. They utilize the best features from Holley's Race Bred Classic 4150 HP (TM) carbs, and we have added billet metering blocks, billet base plate, and knurled (hand adjustable) curb idle screws. The Track Warrior features an aluminum contoured main body design and has screw in air bleeds for precision tuning capabilities. The all new aluminum Track Warrior weighs up to 40% less and adds horsepower and torque, pushing on the track performance to the next level!!
Specifications:
| Description_ASC |
This model of carburetor has the square bore flange bolt pattern. It can replace Holley, Edelbrock, Carter AFB, and Autolite style carburetors with 5 3/16" x 5 5/8" bolt pattern. If you have a spreadbore style intake manifold, you will need an adapter to install this carburetor. Similar to the Mr. Gasket #1932. |
| Description_DEF |
Carburetor |
| Description_DES |
650 CFM Track Warrior Carburetor |
| Description_EXT |
Track Warrior Carburetor; 4 bbl; 650 cfm; Model 4150HP; Mech. Secondary; Dual Fuel Inlet; 1.688 in. Throttle Bore; 1.250 in. Venturii Size; Black; |
| Description_FAB |
Aluminum construction for weight savings and long lasting good looks in purple or black |
| Description_FAB |
Optimized race calibrations for outstanding throttle response |
| Description_FAB |
Contoured venturi inlet offers balanced airflow for increased horsepower |
| Description_FAB |
Screw in air bleeds for precision tuning capabilities |
| Description_FAB |
Four corner idle for precise idle control |
| Description_FAB |
Mechanical secondaries for awesome tire turning performance |
| Description_FAB |
The billet metering blocks feature improved durability over cast blocks, true gasket sealing and fully adjustable (emulsion bleeds, power valve channel restrictors & idle feed restrictors) |
| Description_FAB |
Available in 650, 750, and 850 CFM versions |
| Description_FAB |
Intended for lightweight vehicles w/ manual trans or automatics with high stall & low gearing |
| Description_FAB |
100% wet-flow tested by Holley technicians to assure it arrives ready to run! |
| Description_INV |
TRACK WARRIOR 650 CFM BLACK |
| Description_MKT |
Holley is proud to introduce the all new aluminum Track Warrior carburetors. They utilize the best features from Holley's Race Bred Classic 4150 HP (TM) carbs, and we have added billet metering blocks, billet base plate, and knurled (hand adjustable) curb idle screws. The Track Warrior features an aluminum contoured main body design and has screw in air bleeds for precision tuning capabilities. The all new aluminum Track Warrior weighs up to 40% less and adds horsepower and torque, pushing on the track performance to the next level!! |
| Description_KEY |
carburetor; 650 CFM; aluminum; classic; HP; |
| Description_SHO |
Carburetor |
| Usage |
Racing/Circle Track |
| CFM |
650 |
| Choke |
None |
| Emission Code |
3 |
| Fuel |
Gasoline |
| Primary Pump Nozzle Size |
31 |
| Primary Power Valve |
6.5 |
| Booster Type |
Down Leg |
| Billet Color |
Black |
| Finish |
Shiny |
| Secondary Type |
Mechanical |
| Primary Main Jet |
73 |
| Secondary Pump Nozzle Size |
31 |
| Barrel |
Four |
| Fuel Type |
Gasoline |
| Emission |
Without EGR |
| Flange |
Square Bore |
| Barrels |
4 |
| Booster |
Down Leg |
| Condition |
New |
| Marine Use |
No |
| Warning |
California Proposition 65 |
| Sale Category |
Carburetors and Components |
| WARNING CA Proposition 65 |
Yes |
| Carburetor Type |
4150 |
| Type |
Automotive |
| Secondary Main Jet |
80 |
| Supercharged Application |
No |
| WARNING CA Proposition 65 Message |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Material |
Aluminum |
| Fuel Inlet |
Dual |
| Brand |
Holley |
| Carburetor Use |
Performance and Race |
| Model |
4150 |
| Product Type |
Carburetor |
| Secondaries |
Mechanical |
| Throttle Bore |
1.688 inch |
| Venturii Size |
1.250 inch |
| Warranty |
Limited 90 Day |
| Length |
8.0000 |
| Width |
11.0000 |
| Height |
12.0000 |
| Weight |
9.0000 |
