Description_ASC |
Warning: The 3/4 RACE series converters are NOT designed to be used with Nitrous Oxide or Trans-Brakes Note: HAYS recommends an external transmission cooler for all Twister 3/4 Race Converters (A minimum size of 18,000 GVW or 15,000 BTU Rating.) Note: Stall ranges will vary depending on engine set-up, weight of vehicle, and gear ratio (Please see converter selector in tech resources for more info) |
Description_DEF |
Automatic Transmission Torque Converter |
Description_DES |
Hays Twister 3/4 Race Torque Converter, Chrysler TF-727 |
Description_FAB |
3/4 Race series converters are built, tested, and proven to support up to 650 HP |
Description_FAB |
State of the art Spray Welding process is used in select areas. Spray Welding provides clean, strong and consistent fusion while also increasing strength through hardening from higher process temperature |
Description_FAB |
Each converter is hand-built and inspected in every step of assembly to ensure top of the line quality |
Description_FAB |
All HAYS converters are internally welded compared to brazing. Testing has shown welding provides longer converter life while also enhancing consistency |
Description_FAB |
Heavy duty Torrington bearings are used for greater strength and durability |
Description_FAB |
Stators are chosen with high flow vents and channels to promote cooling in heat producing higher horsepower applications |
Description_FAB |
Increased horsepower and acceleration due to a weight saving, one application design. Almost all HAYS converters are built for one application to reduce weight compared to a multi-bolt pattern converter. |
Description_FAB |
3/4 Race series converters are offered in several different stall speeds for GM, Ford, and Chrysler transmissions |
Description_FAB |
Industry leading Tech Support Team is available to provide assistance with stall speed selection |
Description_EXT |
Hays Twister 3/4 Race Torque Converter; 2800-3200 RPM Stall; 10 in. dia.; 10 in. Bolt Pattern; 24 Spline Input Shaft; 1.81 in. Crank Pilot; |
Description_INV |
CONVERTER, TF-727 28-3200 STALL |
Description_MKT |
Hays Performance Drivetrain is proud to announce Twister 3/4 Race Performance Torque Converters. These NEW torque converters are a perfect addition to Hays product line of performance flexplates, clutches, and flywheels. The 3/4 Race torque converter is the first series being brought to market and is intended for street/strip combinations, with various RPM stall speed offerings to accommodate any mixture of modifications including higher compression ratios, aftermarket camshafts, aftermarket cylinder heads, lower gear ratios, and vehicle weight loss. The name 3/4 Race perfectly describes a torque converter suited for an application just shy of a Full Race version. We offer a Full Race version as well. |
Description_SHO |
Torque Converter |
Bolt Circle Diameter |
10.000 in. |
Use with Trans-Brake |
No |
Trans Year |
1962 |
Warning |
California Proposition 65 |
Transmission Model |
TF-727 |
WARNING CA Proposition 65 Message |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
Bolt Circle |
10" |
Brand |
Hays |
Crank Pilot Diameter |
1.810 in. |
WARNING CA Proposition 65 |
Yes |
Diameter (in.) |
10.000 in. |
Product Type |
Automatic Transmission Torque Converter |
Stall |
2800-3200 |
Transmission |
TF-727 |
Series |
3/4 Race |
Balanced |
Yes |
Use with Power Adder |
No |
Input Shaft Spline Quantity |
24 |
Stall Speed (RPM) |
2800-3200 |
Anti Balloon Plate |
No |
Lock Up Type |
No |
Trans Model |
Chrysler- Torqueflite A727 (Auto) 3 Speed |
Anti-Balloon Plate |
No |
Emission Code |
5 |
Input Spline |
24 |
Lock Up/Overdrive |
No |
Diameter |
10" |
Length |
8.3000 |
Width |
13.6000 |
Height |
13.7000 |
Weight |
28.0350 |