Your Small Town Parts Store With More!
×
Sold out
  • Guaranteed Fitment

    Always the correct part

  • In-House Experts

    We know our products

  • Added Value

    Performance matched parts

  • Nationwide Delivery

    Economy shipping

Hays 97-2E28Q Twister 3/4 Race Torque Converter, Ford C4 Case-Filled

2 sold in last 8 days
Hays
ds_BCCR_97-2E28Q
Out of stock
Automatic Transmission Torque Converter
$896.38

customers are viewing this product
Hays 97-2E28Q Twister 3/4 Race Torque Converter, Ford C4 Case-Filled

Hays Performance Drivetrain is proud to announce Twister 3/4 Race Performance Torque Converters. These NEW torque converters are a perfect addition to Hays product line of performance flexplates, clutches, and flywheels. The 3/4 Race torque converter is the first series being brought to market and is intended for street/strip combinations, with various RPM stall speed offerings to accommodate any mixture of modifications including higher compression ratios, aftermarket camshafts, aftermarket cylinder heads, lower gear ratios, and vehicle weight loss.

Specifications:

Description_ASC Warning: The 3/4 RACE series converters are NOT designed to be used with Nitrous Oxide or Trans-Brakes
Note: HAYS recommends an external transmission cooler for all Twister 3/4 Race Converters (A minimum size of 18,000 GVW or 15,000 BTU Rating.)
Note: Stall ranges will vary depending on engine set-up, weight of vehicle, and gear ratio (Please see converter selector in tech resources for more info) *Bolts must be 3/8-16 x 3/4 to 1 inch in length and only use Grade 8 quality.
Description_DEF Automatic Transmission Torque Converter
Description_EXT Hays Twister 3/4 Race Torque Converter; 2800-3200 RPM Stall; 10 in. dia.; 10.5 in. Bolt Pattern; 26 Spline Input Shaft; 1.375 in. Crank Pilot;
Description_DES Hays Twister 3/4 Race Torque Converter, Ford C4 Case-Filled
Description_INV CONVRTR, C-4 26 SPL CASE FILL 28-3200
Description_FAB 3/4 Race series converters are built, tested, and proven to support up to 650 HP
Description_FAB State of the art Spray Welding process is used in select areas. Spray Welding provides clean, strong and consistent fusion while also increasing strength through hardening from higher process temperature
Description_FAB Each converter is hand-built and inspected in every step of assembly to ensure top of the line quality
Description_FAB All HAYS converters are internally welded compared to brazing. Testing has shown welding provides longer converter life while also enhancing consistency
Description_FAB Heavy duty Torrington bearings are used for greater strength and durability
Description_FAB Stators are chosen with high flow vents and channels to promote cooling in heat producing higher horsepower applications
Description_FAB Increased horsepower and acceleration due to a weight saving, one application design. Almost all HAYS converters are built for one application to reduce weight compared to a multi-bolt pattern converter.
Description_FAB 3/4 Race series converters are offered in several different stall speeds for GM, Ford, and Chrysler transmissions
Description_FAB Industry leading Tech Support Team is available to provide assistance with stall speed selection
Description_MKT Hays Performance Drivetrain is proud to announce Twister 3/4 Race Performance Torque Converters. These NEW torque converters are a perfect addition to Hays product line of performance flexplates, clutches, and flywheels. The 3/4 Race torque converter is the first series being brought to market and is intended for street/strip combinations, with various RPM stall speed offerings to accommodate any mixture of modifications including higher compression ratios, aftermarket camshafts, aftermarket cylinder heads, lower gear ratios, and vehicle weight loss.
Description_MKT The name 3/4 Race perfectly describes a torque converter suited for an application just shy of a Full Race version. We do plan to offer Full Race torque converters in the near future.
Description_MKT Good names never go away, and neither should good terms!
Description_MKT Hays Twister 3/4 Race Torque Converters!
Description_MKT *Bolts must be 3/8-16 x 3/4 to 1 inch in length and only use Grade 8 quality.
Description_SHO Torque Converter
Description_KEY Transmission; torque converter; stall; flex-plate; bellhousing; drivetrain
Use with Trans-Brake No
Bolt Circle Diameter 10.500 in.
Brand Hays
Use with Power Adder No
Crank Pilot Diameter 1.375 in.
Diameter (in.) 10.000 in.
Bolt Circle 10-1/2"
Bolt size 3/8-16 x 1, 3/8-16 x 3/4
Stall 2800-3200
Transmission Model C4 Case-Filled
Balanced Yes
Lock Up Type No
Trans Model Ford- C- 4 (Auto) 3 Speed
Anti Balloon Plate No
Trans Year 1963
Series 3/4 Race
WARNING CA Proposition 65 Yes
Input Shaft Spline Quantity 26
Stall Speed (RPM) 2800-3200
Anti-Balloon Plate No
Emission Code 5
Input Spline 26
Lock Up/Overdrive No
Product Type Automatic Transmission Torque Converter
Transmission C4 Case-Filled
Warning California Proposition 65
WARNING CA Proposition 65 Message WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Diameter 10"
Length 8.0000
Width 13.1000
Height 13.1000
Weight 18.0500
Read More
Read Less
We use cookies to improve your experience on our website. Read about how we use cookies in our Privacy Policy. By browsing this website, you agree to our use of cookies. privacy policy
accept

Your cart

×