The Flowmaster dBX Cat-back exhaust system for these classic Miatas includes 2.25-inch mandrel-bent stainless steel tubing with a full length mid-pipe that follows the factory routing from the catalytic converter back to the muffler. The mid-pipe also includes an O2 sensor fitting in the correct position to ensure proper engine operation and emission compliance. The 304 stainless steel dBX Series muffler features Flowmaster Laminar Flow technology and connects to a single 2.25-inch tailpipe which sends exhaust through the cutout in the rear valence. This system is intended as a Spec Miata system, therefore no tip is included but one can be easily added. All necessary parts and hardware are included for a great fitting and simple installation. Like most dBX series systems, it will typically produces a moderate interior and exterior performance sound level and is covered by our Lifetime Limited Warranty.
Specifications:
| Description_DEF |
Exhaust System Kit |
| Description_DES |
dBX Cat Back Exhaust System |
| Description_MKT |
The Flowmaster dBX Cat-back exhaust system for these classic Miatas includes 2.25-inch mandrel-bent stainless steel tubing with a full length mid-pipe that follows the factory routing from the catalytic converter back to the muffler. The mid-pipe also includes an O2 sensor fitting in the correct position to ensure proper engine operation and emission compliance. The 304 stainless steel dBX Series muffler features Flowmaster Laminar Flow technology and connects to a single 2.25-inch tailpipe which sends exhaust through the cutout in the rear valence. This system is intended as a Spec Miata system, therefore no tip is included but one can be easily added. All necessary parts and hardware are included for a great fitting and simple installation. Like most dBX series systems, it will typically produces a moderate interior and exterior performance sound level and is covered by our Lifetime Limited Warranty. |
| Description_FAB |
Mandrel Bent 16ga 409 Stainless Tubing |
| Description_FAB |
Limited Lifetime Warranty |
| Description_FAB |
Aggressive And Powerful Exterior Exhaust Tone |
| Description_FAB |
Incl. Hangers and Hardware For Easy Installation |
| Description_FAB |
Cat Back System |
| Description_FAB |
Dyno Tuned for Maximum Performance |
| Description_FAB |
Premium Flowmaster Quality |
| Description_FAB |
Connects After Factory Catalytic Converter |
| Description_EXT |
dBX Cat Back Exhaust System; Single; Single Rear Exit; Incl. 2.25 in. Tubing/304 Stainless dBX Muffler/409 Stainless Steel; |
| Description_SHO |
Exhaust System Kit |
| Outlet Diameter |
2.500 in. |
| Title |
Flowmaster 819110 Cat-back System 409S - Single Rear Exit - dBX - Moderate Sound |
| WARNING CA Proposition 65 |
Yes |
| Exhaust Series |
dBX Series |
| Inlet Diameter |
2.250 in. |
| Single or Dual |
Single |
| Heat Shield Attached |
No |
| California Proposition 65 Chemical Name 1 |
Nickel (metallic) |
| Material |
Stainless Steel |
| WARNING CA Proposition 65 Message |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Exit Style |
Straight |
| Sound Level |
Moderate |
| Tip Diameter |
2.250 in. |
| System Type |
Cat Back |
| Exhaust Type |
Single |
| Tubing Diameter |
2.250 in. |
| California Proposition 65 Chemical Name 2 |
Chromium (hexavalent compounds) |
| Inlet Inside Diameter |
2.250 in. |
| Outlet Outside Diameter |
2.250 in. |
| Exit Position |
Single Rear |
| Muffler Part Number |
12414310 |
| Tip Quantity |
1 |
| Tail Pipe Diameter |
2.250 in. |
| Muffler Count |
1 |
| Muffler Series |
dBX Series |
| Length |
17.0000 |
| Width |
12.0000 |
| Height |
58.0000 |
| Weight |
23.0000 |
