Description_ASC |
Fits 2 door models onlyVideo shown is 4 door model to represent sound characteristicsNote: 2021-2023 Bronco cat-back systems will have lower peak dyno results on stock applications when compared to our axle-back systems. This is because the larger 3.0-inch tubing after the factory mid-pipe connection in the cat-back system is optimized for vehicles with additional engine modifications such as tuners, cold air intakes, etc., and is less restrictive when used on higher horsepower applications. |
Description_DEF |
Exhaust System Kit |
Description_EXT |
Fits 2021-2023 Ford Bronco 2.3/2.7-liter, Outlaw Cat-Back 3.0-inch Stainless Steel Exhaust System, 3.0-inch Polished Tip, Single Out Rear Exit, 2 Door Models |
Description_DES |
Outlaw Series (TM) Cat Back Exhaust System |
Description_INV |
21-22 BRONCO 2DR 2.3/2.7L OTL CB SOR, |
Description_MKT |
Flowmaster introduces our Outlaw cat-back exhaust system for the 2021-2023 Ford Bronco 2 door with the 2.3 or 2.7-liter engine. This system replaces the stock muffler with straight pipe for an aggressive exhaust tone and increased performance. Maximum dyno gains of 12 hp and 13 lb-ft were measured at the rear wheels. 3.00-inch mandrel bent 409 stainless steel tubing is used to maximize exhaust flow and durability. This step up from the factory pipe size will help maximize gains from additional engine upgrades. The system keeps the exhaust tip tucked up higher in the rear of the vehicle for better departure angle and minimizes the chance of hanging up on the exhaust when aggressively off-roading. A polished 3.00-inch stainless steel tip is used to add a custom look to this iconic vehicle. All of the necessary hardware is included and factory mounting locations are used for an easy installation. Backed by Flowmaster's Lifetime Limited Warranty. |
Description_SHO |
Exhaust System Kit |
Description_FAB |
Max increases of up to 12 hp and 13 lb-ft over the stock exhaust at the rear wheels |
Description_FAB |
Maximum ground clearance with high tuck design |
Description_FAB |
409 stainless steel construction delivers extra durability and improved long-term corrosion resistance |
Description_FAB |
Uses factory hanger locations for easy installation |
Description_FAB |
3.00-inch 16-gauge mandrel bent stainless steel tubing helps maintain maximum exhaust flow for better power |
Description_FAB |
Includes all necessary hardware for an at home installation |
Description_FAB |
3.00-inch polished stainless steel tip adds a custom look |
Description_FAB |
Lifetime Limited Warranty |
Product Type |
Exhaust System |
Single Dual |
Single |
Warning |
California Proposition 65 |
Material |
409 Stainless Steel |
WARNING CA Proposition 65 |
Yes |
California Proposition 65 Chemical Name |
Chromium (hexavalent compounds), Nickel (Metallic) |
Tip Shape |
Round |
Tubing Diameter (in) |
3.00 |
Tubing Diameter |
3.000 in. |
WARNING CA Proposition 65 Message |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
Brand |
Flowmaster |
California Proposition 65 Required |
Yes |
Exhaust Series |
Outlaw |
Mount Type |
Uses New Hangers (Included) |
Muffler Part Number |
Not Included |
Sound Level |
Aggressive |
Tip Edge Style |
Cut |
Tip Finish |
Polished |
Tip Length |
4.75 |
Tip Logo |
Embossed |
Exit Position |
Single |
Inlet Inside Diameter |
3.000 in. |
Exhaust Type |
Cat Back |
Tip Diameter |
3.000 in. |
Emission Code |
5 |
System Type |
Cat-back |
Tip Cut |
Angle |
Tip Material |
304 Stainless |
Tip Quantity |
1.00 |
Tip Style |
Single Wall |
Tubing Material |
409S Stainless Steel |
Length |
10.0000 |
Width |
15.0000 |
Height |
50.0000 |
Weight |
21.0000 |