Flowmaster introduces our Outlaw High Clearance cat-back exhaust system for the 2021-2022 Ford Bronco with the 2.3 or 2.7-liter engine. This system replaces the stock muffler with straight pipe for an aggressive exhaust tone and increased performance. Maximum dyno gains of 19 hp and 19 lb.-ft. were measured at the rear wheels. 3.00-inch mandrel bent 409 stainless steel tubing is used from the factory mid-pipe flange back to maximize exhaust flow and durability. This step up from the factory pipe size will help maximize gains from additional engine upgrades. This system keeps the exhaust tip tucked up higher in the rear of the vehicle for better departure angle and minimizes the chance of hanging up on the exhaust when aggressively off roading. A polished 3.00-inch stainless steel tip is used to add a custom look to this iconic vehicle. All of the necessary hardware is included and factory mounting locations are used for an easy installation. Backed by Flowmasters Lifetime Limited Warranty.
Specifications:
| Description_ASC |
2021-2023 Ford Bronco with 2.3L and 2.7L Ecoboost engines. Fits 2 & 4-wheel drive.Fits 4 door models only.Note: 2021-2023 Bronco cat-back systems will have lower peak dyno results on stock applications when compared to our axle-back systems. This is because the larger 3.0-inch tubing after the factory mid-pipe connection in the cat-back system is optimized for vehicles with additional engine modifications such as tuners, cold air intakes, etc., and is less restrictive when used on higher horsepower applications. |
| Description_DEF |
Exhaust System Kit |
| Description_DES |
Outlaw Series (TM) Cat Back Exhaust System |
| Description_EXT |
Outlaw Series (TM) Cat Back Exhaust System; Single Rear Exit; 409 Stainless Steel; |
| Description_SHO |
Exhaust System Kit |
| Description_INV |
21-23 BRONCO 2.3/2.7L OTL CB SOR, HGC |
| Description_FAB |
High Clearance muffler delete system improves departure angle when off-roading by increasing space under the rear bumper |
| Description_FAB |
3.00-inch mandrel bent 16-gauge 409 stainless steel tubing maximizes exhaust flow and improves durability |
| Description_FAB |
A 3.00-inch polished stainless steel tips add a custom look |
| Description_FAB |
Includes complete hardware and factory styled hangers in the stock locations for an easy installation |
| Description_FAB |
Maximum ground clearance with high tuck design |
| Description_FAB |
Backed by Flowmaster's Lifetime Limited Warranty |
| Description_MKT |
Flowmaster introduces our Outlaw High Clearance cat-back exhaust system for the 2021-2022 Ford Bronco with the 2.3 or 2.7-liter engine. This system replaces the stock muffler with straight pipe for an aggressive exhaust tone and increased performance. Maximum dyno gains of 19 hp and 19 lb.-ft. were measured at the rear wheels. 3.00-inch mandrel bent 409 stainless steel tubing is used from the factory mid-pipe flange back to maximize exhaust flow and durability. This step up from the factory pipe size will help maximize gains from additional engine upgrades. This system keeps the exhaust tip tucked up higher in the rear of the vehicle for better departure angle and minimizes the chance of hanging up on the exhaust when aggressively off roading. A polished 3.00-inch stainless steel tip is used to add a custom look to this iconic vehicle. All of the necessary hardware is included and factory mounting locations are used for an easy installation. Backed by Flowmasters Lifetime Limited Warranty. |
| Exhaust Series |
Outlaw |
| Material |
409 Stainless Steel |
| Sound Level |
Aggressive |
| WARNING CA Proposition 65 Message |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| WARNING CA Proposition 65 |
Yes |
| California Proposition 65 Chemical Name |
Chromium (hexavalent compounds), Nickel (Metallic) |
| California Proposition 65 Required |
Yes |
| Product Type |
Exhaust System |
| Tip Length |
4.75 |
| Tip Shape |
Round |
| Tubing Diameter (in) |
3.00 |
| Single Dual |
Single |
| Tip Style |
Single Wall |
| Exit Position |
Single Rear |
| Muffler Part Number |
Not Included |
| System Type |
Cat-back |
| Tip Cut |
Angle |
| Tip Edge Style |
Cut |
| Tip Finish |
Polished |
| Tip Logo |
Embossed |
| Tip Quantity |
1.00 |
| Warning |
California Proposition 65 |
| Exhaust Type |
Cat-Back |
| Brand |
Flowmaster |
| Emission Code |
5 |
| Mount Type |
Uses New Hangers (Included) |
| Tip Diameter |
3.00 |
| Tip Material |
304 Stainless |
| Tubing Material |
409S Stainless Steel |
| Length |
9.4000 |
| Width |
15.0000 |
| Height |
50.0000 |
| Weight |
22.5500 |
