Flowmaster introduces our Outlaw cat-back exhaust system for the 2021-2023 Ford Bronco with the 2.3 or 2.7-liter engine. This system uses an Outlaw style muffler for an aggressive exhaust tone and increased performance. Maximum dyno gains of 6 hp and 7 lb-ft. were measured at the rear wheels. 3.00-inch mandrel bent 409 stainless steel tubing is used from the factory mid-pipe flange back to maximize exhaust flow and durability. This step up from the factory pipe size will help maximize gains from additional engine upgrades. The over-axle section is also routed to help gain an additional 2.0-inches of clearance from the axle when used on applications with modified suspensions. This allows for better suspension travel when used in extreme off-road situations. Dual 4.00-inch black chrome tips are used to add a custom look to this iconic vehicle. All of the necessary hardware is included and factory mounting locations are used for an easy installation. Backed by Flowmaster's Lifetime Limited Warranty.
Specifications:
Description_ASC |
2021-2023 Ford Bronco with 2.3L and 2.7L Ecoboost engines. Fits 2 & 4-wheel drive.Fits 4 door models only. For 2 door models use part # 818144.Note: 2021-2023 Bronco cat-back systems will have lower peak dyno results on stock applications when compared to our axle-back systems. This is because the larger 3.0-inch tubing after the factory mid-pipe connection in the cat-back system is optimized for vehicles with additional engine modifications such as tuners, cold air intakes, etc., and is less restrictive when used on higher horsepower applications. |
Description_DEF |
Exhaust System Kit |
Description_EXT |
Outlaw Series (TM) Cat Back Exhaust System; Dual Rear Exit; 409 Stainless Steel; |
Description_DES |
Outlaw Series (TM) Cat Back Exhaust System |
Description_INV |
21-23 FORD BRONCO 2.3/2.7L OTL CB DOR |
Description_MKT |
Flowmaster introduces our Outlaw cat-back exhaust system for the 2021-2023 Ford Bronco with the 2.3 or 2.7-liter engine. This system uses an Outlaw style muffler for an aggressive exhaust tone and increased performance. Maximum dyno gains of 6 hp and 7 lb-ft. were measured at the rear wheels. 3.00-inch mandrel bent 409 stainless steel tubing is used from the factory mid-pipe flange back to maximize exhaust flow and durability. This step up from the factory pipe size will help maximize gains from additional engine upgrades. The over-axle section is also routed to help gain an additional 2.0-inches of clearance from the axle when used on applications with modified suspensions. This allows for better suspension travel when used in extreme off-road situations. Dual 4.00-inch black chrome tips are used to add a custom look to this iconic vehicle. All of the necessary hardware is included and factory mounting locations are used for an easy installation. Backed by Flowmaster's Lifetime Limited Warranty. |
Description_FAB |
3.00-inch mandrel bent 16-gauge 409 stainless steel tubing maximizes exhaust flow and improves durability |
Description_FAB |
Dual 4.00-inch black chrome tips add a custom look |
Description_FAB |
Includes complete hardware and factory styled hangers in the stock locations for an easy installation |
Description_FAB |
An Outlaw Series performance muffler delivers a deep, aggressive performance tone and improves exhaust flow |
Description_FAB |
Backed by Flowmaster's Lifetime Limited Warranty |
Description_SHO |
Exhaust System Kit |
Exhaust Type |
Cat-Back |
Mount Type |
Uses New Hangers (Included) |
Emission Code |
5 |
Exit Position |
Dual Rear |
Muffler Overall Length (in) |
25.25 |
Muffler Part Number |
Kit Only |
Muffler Series |
Outlaw |
Tip Cut |
Angle |
Material |
409 Stainless Steel |
California Proposition 65 Chemical Name |
Chromium (hexavalent compounds), Nickel (Metallic) |
Muffler Body Length (in) |
5.25 |
Muffler Inlet Location |
Centered |
Muffler Outlet Diameter (in) |
3.00 |
Tip Length |
5.25 |
Tip Material |
304 Stainless |
Tubing Material |
409S Stainless Steel |
WARNING CA Proposition 65 |
Yes |
WARNING CA Proposition 65 Message |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
Brand |
Flowmaster |
California Proposition 65 Required |
Yes |
Exhaust Series |
Outlaw |
Muffler Color |
Black |
Muffler Finish |
Painted |
Muffler Inlet Diameter (in) |
3.00 |
Muffler Material |
409S Stainless Steel |
Muffler Outlet Location |
Dual Outlet |
Muffler Quantity |
1 |
Muffler Shape |
Oval |
Muffler Type |
Reflection |
Product Type |
Exhaust System |
Sale Category |
Exhaust |
Single Dual |
Dual |
Sound Level |
Aggressive |
System Type |
Cat-back |
Tip Diameter |
4.00 |
Tip Edge Style |
Rolled |
Tip Finish |
Black Chrome |
Tip Logo |
Embossed |
Tip Quantity |
2.00 |
Tip Shape |
Round |
Tip Style |
Single Wall |
Tubing Diameter (in) |
3.00 |
Warning |
California Proposition 65 |
Length |
11.3000 |
Width |
28.0000 |
Height |
47.7000 |
Weight |
39.3000 |