This Flowmaster® Force II® Cat-back exhaust system fits 2007-2018 Jeep Wrangler JK 2-door and 4-door models with the 3.8L or 3.6L engines. This emissions legal system is constructed from 2.50-inch mandrel-bent stainless steel flowing into a Super 50 Series™ muffler, which incorporates an internal resonance chamber keeping interior drone down to a minimum while providing a deep mild exterior sound level. The mandrel-bent tailpipe exits in the stock location and is finished off with a 3.00-inch brushed 304 stainless steel tip at the rear bumper. The system uses the factory hanger locations for easy installation and includes all necessary parts, hardware, installation instructions and is covered by our Lifetime Limited Warranty.
Specifications:
| Description_ASC |
"Fits 2007-2018 Jeep Wrangler JK with 3.6L or 3.8L engine, fits both 2 door and 4 door models. |
| Description_DEF |
Exhaust System Kit |
| Description_DES |
Flowmaster Force II Cat-back Exhaust System |
| Description_INV |
07-18 JEEP WRANGLER JK FII CB 409S |
| Description_EXT |
Force II Cat Back System; Single; Single Rear Exit; Incl. 2.5 in. Tubing/Super 50 Series (TM) Muffler/3 in. Brushed Stainless Tip; 409 Stainless Steel; |
| Description_FAB |
Super 50 Series Muffler with Built-in Resonance Chamber |
| Description_FAB |
Includes Hangers and Hardware for an Easy Installation |
| Description_FAB |
Mandrel-bent 16 gauge Stainless Steel Tubing |
| Description_FAB |
Connects After Factory Catalytic Converter |
| Description_FAB |
Stock to Mild Exterior Exhaust Tone |
| Description_FAB |
Uses the Factory Hanger Locations |
| Description_FAB |
Lifetime Limited Warranty |
| Description_MKT |
This Flowmaster® Force II® Cat-back exhaust system fits 2007-2018 Jeep Wrangler JK 2-door and 4-door models with the 3.8L or 3.6L engines. This emissions legal system is constructed from 2.50-inch mandrel-bent stainless steel flowing into a Super 50 Series™ muffler, which incorporates an internal resonance chamber keeping interior drone down to a minimum while providing a deep mild exterior sound level. The mandrel-bent tailpipe exits in the stock location and is finished off with a 3.00-inch brushed 304 stainless steel tip at the rear bumper. The system uses the factory hanger locations for easy installation and includes all necessary parts, hardware, installation instructions and is covered by our Lifetime Limited Warranty. |
| Description_SHO |
Exhaust System Kit |
| California Proposition 65 Chemical Name |
Chromium (hexavalent compounds), Nickel (Metallic) |
| Outlet Diameter |
2.500 in. |
| Exhaust Series |
Force II |
| Title |
Flowmaster 817514 Cat-back System 409S - Single Rear Exit - Force II - Mild Sound |
| WARNING CA Proposition 65 |
Yes |
| Material |
409 Stainless Steel |
| California Proposition 65 Chemical Name 2 |
Chromium (hexavalent compounds) |
| WARNING CA Proposition 65 Message |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Sound Level |
Mild |
| Exit Style |
Straight |
| California Proposition 65 Required |
Yes |
| Inlet Diameter (in) |
2.5 |
| Product Type |
Exhaust System |
| Single Dual |
Single |
| Tubing Diameter (in) |
2.5 |
| Warning |
California Proposition 65 |
| System Type |
Cat Back |
| Tip Diameter |
3.000 in. |
| Heat Shield Attached |
No |
| California Proposition 65 Chemical Name 1 |
Nickel (metallic) |
| Muffler Part Number |
Kit Only |
| Tip Quantity |
1 |
| Inlet Inside Diameter |
2.500 in. |
| Tail Pipe Diameter |
2.500 in. |
| Muffler Series |
Super 50 Series |
| 2WD/4WD |
4WD |
| Emission Code |
5 |
| Exit Position |
Single Rear Exit |
| Heat Shield |
No |
| Muffler Quantity |
1 |
| Outlet Diameter (in) |
2.5 |
| Exhaust Type |
Single |
| Tubing Diameter |
2.500 in. |
| Single or Dual |
Single |
| Inlet Diameter |
2.500 in. |
| Muffler Count |
1 |
| Outlet Outside Diameter |
2.500 in. |
| Brand |
Flowmaster |
| Tip Diameter (in) |
3 |
| Length |
12.0000 |
| Width |
21.0000 |
| Height |
41.0000 |
| Weight |
39.0000 |
