This Flowmaster Force II® cat-back exhaust system is custom designed for 1994-1997 Ford F-250/F-350 trucks with a 5.8L or 7.5L engine using a 3-inch catalytic converter and is perfect for the person looking for a mild to moderate sound level inside and outside of the truck, with all of the performance benefits that you would expect from Flowmaster®. This bolt-on emissions-legal system features a 3.00-inch mandrel-bent aluminized steel inlet pipe flowing into a 70 Series Big Block II™ muffler for a deep mellow tone. The single 3.00-inch aluminized steel mandrel-bent tailpipe is finished off with an angle cut turn down style tip behind the right rear wheel and uses the factory hanger locations. Also includes an aluminum heat shield with strap clamps to secure it to the muffler. The exhaust system is covered by our 3-year Limited Warranty and includes all necessary parts and hardware for a quick and easy installation you can do at home. Notes: Fits 2/4 wheel drive models and all wheelbases including Crew Cab.
Specifications:
Description_ASC |
Fits 1994-1997 Ford F-250/F-350 trucks with a 5.8L or 7.5L engine using a 3-inch catalytic converter. Fits 2 and 4 wheel drive models and all wheelbases including Crew Cab. |
Description_DES |
Flowmaster Force II Cat-back Exhaust System |
Description_INV |
94-97 FORD F250/F350 TRK FII |
Description_FAB |
Includes Aluminum Heat shield and Stainless Steel Clamps |
Description_FAB |
Includes Hangers and Hardware for an Easy Installation |
Description_FAB |
Mandrel-bent 16 Gauge Aluminized Tubing |
Description_FAB |
70 Series Big Block II Performance Muffler |
Description_FAB |
Mild to Moderate Exterior Exhaust Tone |
Description_FAB |
Dyno Tuned for Maximum Performance |
Description_FAB |
Uses the Factory Hanger Locations |
Description_FAB |
3-year Limited Warranty |
Description_FAB |
Easy Installation |
Description_EXT |
1994-1997 Ford F-250/F-350 trucks with a 5.8L or 7.5L engine using a 3-inch catalytic converter. - Mild sound |
Description_MKT |
This Flowmaster Force II® cat-back exhaust system is custom designed for 1994-1997 Ford F-250/F-350 trucks with a 5.8L or 7.5L engine using a 3-inch catalytic converter and is perfect for the person looking for a mild to moderate sound level inside and outside of the truck, with all of the performance benefits that you would expect from Flowmaster®. This bolt-on emissions-legal system features a 3.00-inch mandrel-bent aluminized steel inlet pipe flowing into a 70 Series Big Block II™ muffler for a deep mellow tone. The single 3.00-inch aluminized steel mandrel-bent tailpipe is finished off with an angle cut turn down style tip behind the right rear wheel and uses the factory hanger locations. Also includes an aluminum heat shield with strap clamps to secure it to the muffler. The exhaust system is covered by our 3-year Limited Warranty and includes all necessary parts and hardware for a quick and easy installation you can do at home. Notes: Fits 2/4 wheel drive models and all wheelbases including Crew Cab. |
Single Dual |
Single |
Tail Pipe Diameter |
3.000 in. |
Tip Diameter |
N/A |
System Type |
Cat Back |
Brand |
Flowmaster |
Outlet Diameter (in) |
3 |
Tubing Diameter (in) |
3 |
Muffler Quantity |
1 |
Outlet Outside Diameter |
3.000 in. |
Exhaust Series |
Force II |
Muffler Series |
70 Series Big Block |
Muffler Part Number |
53073 |
Emission Code |
5 |
Exit Position |
Single Side Exit |
Sound Level |
Mild |
Single or Dual |
Single |
Heat Shield Attached |
No |
Outlet Diameter |
3.000 in. |
Inlet Diameter |
3.000 in. |
Tubing Diameter |
3.000 in. |
Exhaust Type |
Single |
Inlet Inside Diameter |
N/A |
Muffler Count |
1 |
WARNING CA Proposition 65 |
No |
2WD/4WD |
2WD/4WD |
California Proposition 65 Required |
No |
Inlet Diameter (in) |
3 |
Product Type |
Exhaust System |
Tip Quantity |
Not Included |
Title |
Flowmaster 17211 Cat-back System - Single Side Exit - Force II - Mild Sound |
Exit Style |
Straight |
Material |
Aluminized Steel |
Heat Shield |
No |
Length |
16.0000 |
Width |
11.0000 |
Height |
59.0000 |
Weight |
57.0000 |