Our Force II® exhaust system for 1987-1993 Ford Mustang LX and 1986 GT models with the 5.0L engine is a bolt-on emissions legal system featuring free-flowing 2.50-inch aluminized steel mandrel-bent inlet pipes, aluminized steel tailpipes and uses the factory hanger locations for quick and easy installation. This Flowmaster® exhaust system comes with a pair of 50 Series™ Delta Flow® mufflers with heat shields and the sound to complement that iconic deep and powerful Fox body 5.0L engine. The system is then finished off with a pair of long 2.50-inch polished 304 stainless steel tips for that show car look. Comes with all necessary hardware and easy to follow instructions. Note: Fits coupes and convertibles. Also fits 1986 Ford Mustang GT models with 5.0L engine.
Specifications:
| Description_ASC |
Fits 1986-1993 Ford Mustang, LX with a 5.0L engine and 1986 GT with 5.0L engine. Fits Coupes and Convertibles. |
| Description_DES |
Flowmaster Force II Cat-back Exhaust System |
| Description_EXT |
1986-1993 Ford Mustang LX with 5.0L engine and 1986 GT with 5.0L engine. - Moderate sound |
| Description_FAB |
Includes Hangers and Hardware for Easy Installation |
| Description_FAB |
Pair of 50 Series Delta Flow Performance Mufflers |
| Description_FAB |
Mandrel-bent 16 Gauge Aluminized Steel Tubing |
| Description_FAB |
Polished 304 Stainless Steel Tailpipe Tips |
| Description_FAB |
Dyno Tuned for Maximum Performance |
| Description_FAB |
Moderate Exterior Exhaust Tone |
| Description_FAB |
3-year Limited Warranty |
| Description_FAB |
Minimal Interior Sound |
| Description_INV |
87-93 MUSTANG 5.0L LX & 86 GT FII |
| Description_MKT |
Our Force II® exhaust system for 1987-1993 Ford Mustang LX and 1986 GT models with the 5.0L engine is a bolt-on emissions legal system featuring free-flowing 2.50-inch aluminized steel mandrel-bent inlet pipes, aluminized steel tailpipes and uses the factory hanger locations for quick and easy installation. This Flowmaster® exhaust system comes with a pair of 50 Series™ Delta Flow® mufflers with heat shields and the sound to complement that iconic deep and powerful Fox body 5.0L engine. The system is then finished off with a pair of long 2.50-inch polished 304 stainless steel tips for that show car look. Comes with all necessary hardware and easy to follow instructions. Note: Fits coupes and convertibles. Also fits 1986 Ford Mustang GT models with 5.0L engine. |
| Muffler Part Number |
Kit Only |
| Inlet Inside Diameter |
N/A |
| Tip Quantity |
2 |
| Tail Pipe Diameter |
2.500 in. |
| System Type |
Cat Back |
| Tip Diameter |
2.500 in. |
| California Proposition 65 Chemical Name 1 |
Nickel (metallic) |
| Heat Shield |
No |
| Outlet Diameter (in) |
2.5 |
| Tip Diameter (in) |
2.5 |
| Exhaust Type |
Dual |
| Tubing Diameter |
2.500 in. |
| Single or Dual |
Dual |
| Outlet Outside Diameter |
2.500 in. |
| Inlet Diameter |
2.500 in. |
| Muffler Count |
2 |
| Muffler Series |
50 Series Delta Flow |
| 2WD/4WD |
2WD |
| Brand |
Flowmaster |
| Emission Code |
5 |
| Exit Position |
Dual Out Rear |
| WARNING CA Proposition 65 Message |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| California Proposition 65 Chemical Name 2 |
Chromium (hexavalent compounds) |
| Material |
Aluminized Steel |
| Title |
Flowmaster 17203 Cat-back System - Dual Rear Exit - Force II - Moderate Sound |
| Exit Style |
Straight |
| WARNING CA Proposition 65 |
Yes |
| Sound Level |
Moderate |
| Exhaust Series |
Force II |
| Heat Shield Attached |
No |
| Outlet Diameter |
2.500 in. |
| California Proposition 65 Chemical Name |
Chromium (hexavalent compounds), Nickel (Metallic) |
| California Proposition 65 Required |
Yes |
| Inlet Diameter (in) |
2.5 |
| Muffler Quantity |
2 |
| Product Type |
Exhaust System |
| Tubing Diameter (in) |
2.5 |
| Warning |
California Proposition 65 |
| Single Dual |
Dual |
| Length |
14.0000 |
| Width |
14.0000 |
| Height |
49.0000 |
| Weight |
51.0000 |
