Edelbrock part #7179 Victor EFI intake manifold is designed for the "Eagle or WT" Chrysler 5.7L, 6.1L and 6.4L Gen III HEMI engines with fuel injection. The overall design is similar to the factory 6.1L SRT intake manifold, but with longer higher flowing runners and features relocated fuel injector bosses for improved flow and added nitrous bosses along the near vertical runners. The front inlet can accommodate the factory style 80mm throttle body or the 92mm Hellcat throttle body. In testing, the Victor EFI prototype made 25 hp over the stock intake manifold on a 6.4L engine. Manifold will clear most hoods without modifications. Required fuel rail kit #3647 available separately.
Specifications:
| Description_ABR |
Intake Mnfld |
| Description_ASM |
Chrysler:Gen III HEMI:345 (5.7L)/372 (6.1L)/392 (6.4L) |
| Description_DEF |
Engine Intake Manifold |
| Description_EXT |
Edelbrock Victor EFI Intake Manifold for Gen III HEMI (Eagle or WT) |
| Description_LAB |
Victor EFI Gen III Chrysler HEMI Intake Manifold |
| Description_MKT |
Edelbrock part #7179 Victor EFI intake manifold is designed for the "Eagle or WT" Chrysler 5.7L, 6.1L and 6.4L Gen III HEMI engines with fuel injection. The overall design is similar to the factory 6.1L SRT intake manifold, but with longer higher flowing runners and features relocated fuel injector bosses for improved flow and added nitrous bosses along the near vertical runners. The front inlet can accommodate the factory style 80mm throttle body or the 92mm Hellcat throttle body. In testing, the Victor EFI prototype made 25 hp over the stock intake manifold on a 6.4L engine. Manifold will clear most hoods without modifications. Required fuel rail kit #3647 available separately. |
| Description_INV |
Black Victor Gen 3 Hemi Intake Manifold |
| Description_TRA |
Port flanges have machined grooves to accept stock port seals. |
| Description_TRA |
Manifold Dimensions: A-6.06", B-7.85", C-18.30", D-2.25", E-0 Deg |
| Description_TRA |
Port exit dimensions: 1.83" x 1.85" |
| Description_TRA |
Throttle body recommendations: Factory OEM or aftermarket |
| Description_TRA |
6.4L Challengers/Chargers/300s MUST use an OEM or OEM replacement 6.1L air intake system and without intake runner control valve. |
| Basic Operating RPM Range |
1500-6500 |
| Rear Maximum Height |
7.850 |
| Material |
Aluminum |
| Grade Type |
Performance |
| Single Or Dual Plane Type |
Single |
| Center Maximum Height |
7.850 |
| Series |
Victor |
| Gasket Or Seal Included |
No |
| RGL |
WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov. |
| Flange Type |
Throttle Body XT |
| Finish |
Black Powder Coated |
| Vehicle Model |
Chrysler |
| Front Maximum Height |
6.060 |
| EGR Port |
No |
| CNC Ported |
No |
| Length |
8.0000 |
| Width |
15.0000 |
| Height |
22.0000 |
| Weight |
34.0000 |
